commit dcc8bdaa533f581e41725aa052d99eaeb3781c4b Author: Alfred Chen Date: Thu May 3 11:04:04 2018 +0800 Tag PDS 0.98o commit 553dee35b685bed40364dc0886e6275f040a89c1 Author: Alfred Chen Date: Tue Apr 24 14:54:07 2018 +0800 pds: Remove addtional cpu ative check in rebalance. commit 94200fef89782afe7d221cbfc3c260fa6dd5989c Author: Alfred Chen Date: Fri Apr 20 15:23:58 2018 +0800 pds: Remove unused sched_cpu_affinity_llc_end_masks. commit 02960fa0a842deed50099ae7ba62cfd60e82866e Author: Alfred Chen Date: Thu Apr 19 15:02:37 2018 +0800 pds: Fix a bug in get_nohz_timer_target(). commit b3816d3c53daf544b8c98b6c92848149505e7145 Author: Alfred Chen Date: Thu Apr 19 14:27:20 2018 +0800 pds: Remove unnecessary task prio update in activate_task(). commit 6055c45f544e845a27a5873653087f5b12e8d4b5 Author: Alfred Chen Date: Thu Apr 19 13:47:46 2018 +0800 pds: Remove sleep profiling. Current sleep profiling is not accurate. commit 480a512ca2ebce6de4b52fed60e4c283b727a5a9 Author: Alfred Chen Date: Wed Apr 18 16:46:36 2018 +0800 pds: Optimize cpumask usage. commit 1fd8c40c774a6defed2308d75de4b01990bc7ec3 Author: Alfred Chen Date: Wed Apr 18 15:23:06 2018 +0800 pds: Optimze WARN_ONCE format parameter usage. commit 62fb7d223e5277d8628bffec0038ba96a13123ad Author: Alfred Chen Date: Wed Apr 18 15:04:13 2018 +0800 pds: Code cleanup. commit ed548d03b277b287949160adf20715da1949d886 Author: Alfred Chen Date: Wed Apr 18 14:54:27 2018 +0800 pds: inline enqueue_task() and dequeue_task(). commit 6774d8b1b079c2c76fb99e32f9a5fe0a27a1be4c Author: Alfred Chen Date: Wed Apr 18 15:05:50 2018 +0800 pds: Optimize enqueue_task(). commit de6e2473f405f9dab6e96531c9980f9c095f8136 Merge: bcd905bce011 dec316ea1828 Author: Alexandre Frade Date: Wed May 9 12:26:14 2018 -0300 Merge tag 'v4.16.8' into 4.16 This is the 4.16.8 stable release commit dec316ea18281d2892324a4bfeb4d5a8a6605e69 Author: Greg Kroah-Hartman Date: Wed May 9 09:53:14 2018 +0200 Linux 4.16.8 commit b11873bfabc767fccc7e57b9a13f34b039386ff5 Author: Song Liu Date: Mon Apr 23 10:21:34 2018 -0700 tracing: Fix bad use of igrab in trace_uprobe.c commit 0c92c7a3c5d416f47b32c5f20a611dfeca5d5f2e upstream. As Miklos reported and suggested: This pattern repeats two times in trace_uprobe.c and in kernel/events/core.c as well: ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) goto fail_address_parse; inode = igrab(d_inode(path.dentry)); path_put(&path); And it's wrong. You can only hold a reference to the inode if you have an active ref to the superblock as well (which is normally through path.mnt) or holding s_umount. This way unmounting the containing filesystem while the tracepoint is active will give you the "VFS: Busy inodes after unmount..." message and a crash when the inode is finally put. Solution: store path instead of inode. This patch fixes two instances in trace_uprobe.c. struct path is added to struct trace_uprobe to keep the inode and containing mount point referenced. Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com Fixes: f3f096cfedf8 ("tracing: Provide trace events interface for uprobes") Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU") Cc: stable@vger.kernel.org Cc: Ingo Molnar Cc: Howard McLauchlan Cc: Josef Bacik Cc: Srikar Dronamraju Acked-by: Miklos Szeredi Reported-by: Miklos Szeredi Signed-off-by: Song Liu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 23a9018d8881f1241f2b600b633aefdf4c47740f Author: Peter Zijlstra Date: Mon Apr 30 12:00:13 2018 +0200 clocksource: Consistent de-rate when marking unstable commit cd2af07d823e5287cd6c91d54337348c2a873462 upstream. When a registered clocksource gets marked unstable the watchdog_kthread will de-rate and re-select the clocksource. Ensure it also de-rates when getting called on an unregistered clocksource. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Reviewed-by: Rafael J. Wysocki Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.594904898@infradead.org Signed-off-by: Greg Kroah-Hartman commit fa343b3928933448ff44fad37a8276da03a0319f Author: Peter Zijlstra Date: Mon Apr 30 12:00:11 2018 +0200 clocksource: Initialize cs->wd_list commit 5b9e886a4af97574ca3ce1147f35545da0e7afc7 upstream. A number of places relies on list_empty(&cs->wd_list), however the list_head does not get initialized. Do so upon registration, such that thereafter it is possible to rely on list_empty() correctly reflecting the list membership status. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Tested-by: Diego Viola Reviewed-by: Rafael J. Wysocki Cc: stable@vger.kernel.org Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org Signed-off-by: Greg Kroah-Hartman commit c276594bfbe57846ce777b3c42386c13b898a37e Author: Peter Zijlstra Date: Mon Apr 23 17:28:55 2018 +0200 clocksource: Allow clocksource_mark_unstable() on unregistered clocksources commit 2aae7bcfa4104b770e6f612356adb8d66c6144d6 upstream. Because of how the code flips between tsc-early and tsc clocksources it might need to mark one or both unstable. The current code in mark_tsc_unstable() only worked because previously it registered the tsc clocksource once and then never touched it. Since it now unregisters the tsc-early clocksource, it needs to know if a clocksource got unregistered and the current cs->mult test doesn't work for that. Instead use list_empty(&cs->list) to test for registration. Furthermore, since clocksource_mark_unstable() needs to place the cs on the wd_list, it links the cs->list and cs->wd_list serialization. It must not see a clocsource registered (!empty cs->list) but already past dequeue_watchdog(). So place {en,de}queue{,_watchdog}() under the same lock. Provided cs->list is initialized to empty, this then allows us to unconditionally use clocksource_mark_unstable(), regardless of the registration state. Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Reviewed-by: Rafael J. Wysocki Tested-by: Diego Viola Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180502135312.GS12217@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman commit 077a1c2c0b53915d0ff7eb27c34a7ba8a394f3ba Author: Agustin Vega-Frias Date: Tue May 1 10:14:50 2018 -0400 irqchip/qcom: Fix check for spurious interrupts commit 1bc2463cee92ef0e2034c813d5e511adeb58b5fd upstream. When the interrupts for a combiner span multiple registers it must be checked if any interrupts have been asserted on each register before checking for spurious interrupts. Checking each register seperately leads to false positive warnings. [ tglx: Massaged changelog ] Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver") Signed-off-by: Agustin Vega-Frias Signed-off-by: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Cc: timur@codeaurora.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1525184090-26143-1-git-send-email-agustinv@codeaurora.org Signed-off-by: Greg Kroah-Hartman commit 1ab4ca7c59d45b2563754053e9b9fb7c40bdf795 Author: Peter Zijlstra Date: Mon Apr 30 12:00:12 2018 +0200 x86/tsc: Fix mark_tsc_unstable() commit e3b4f79025e0a4eb7e2a2c7d24dadfa1e38893b0 upstream. mark_tsc_unstable() also needs to affect tsc_early, Now that clocksource_mark_unstable() can be used on a clocksource irrespective of its registration state, use it on both tsc_early and tsc. This does however require cs->list to be initialized empty, otherwise it cannot tell the registation state before registation. Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Tested-by: Diego Viola Reviewed-by: Rafael J. Wysocki Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.533326547@infradead.org Signed-off-by: Greg Kroah-Hartman commit c2908cac1b043a6cb8584185b2ca438908873870 Author: Peter Zijlstra Date: Mon Apr 30 12:00:09 2018 +0200 x86/tsc: Always unregister clocksource_tsc_early commit e9088adda13cd23249d4b0abb97ff8a81bf5573a upstream. Don't leave the tsc-early clocksource registered if it errors out early. This was reported by Diego, who on his Core2 era machine got TSC invalidated while it was running with tsc-early (due to C-states). This results in keeping tsc-early with very bad effects. Reported-and-Tested-by: Diego Viola Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Reviewed-by: Rafael J. Wysocki Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.350507853@infradead.org Signed-off-by: Greg Kroah-Hartman commit c8db8614ead6f6c2de3fccd6ef328385b4bd51c2 Author: Anthoine Bourgeois Date: Sun Apr 29 22:05:58 2018 +0000 KVM: x86: remove APIC Timer periodic/oneshot spikes commit ecf08dad723d3e000aecff6c396f54772d124733 upstream. Since the commit "8003c9ae204e: add APIC Timer periodic/oneshot mode VMX preemption timer support", a Windows 10 guest has some erratic timer spikes. Here the results on a 150000 times 1ms timer without any load: Before 8003c9ae204e | After 8003c9ae204e Max 1834us | 86000us Mean 1100us | 1021us Deviation 59us | 149us Here the results on a 150000 times 1ms timer with a cpu-z stress test: Before 8003c9ae204e | After 8003c9ae204e Max 32000us | 140000us Mean 1006us | 1997us Deviation 140us | 11095us The root cause of the problem is starting hrtimer with an expiry time already in the past can take more than 20 milliseconds to trigger the timer function. It can be solved by forward such past timers immediately, rather than submitting them to hrtimer_start(). In case the timer is periodic, update the target expiration and call hrtimer_start with it. v2: Check if the tsc deadline is already expired. Thank you Mika. v3: Execute the past timers immediately rather than submitting them to hrtimer_start(). v4: Rearm the periodic timer with advance_periodic_target_expiration() a simpler version of set_target_expiration(). Thank you Paolo. Cc: Mika Penttilä Cc: Wanpeng Li Cc: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Anthoine Bourgeois 8003c9ae204e ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support") Signed-off-by: Radim Krčmář Signed-off-by: Greg Kroah-Hartman commit 0897d3c34daea2184c5459e4c7e7fcb64b7598f7 Author: Mario Limonciello Date: Fri Apr 20 12:42:11 2018 -0500 platform/x86: Kconfig: Fix dell-laptop dependency chain. commit 7fe3fa3b5ec8e75389cce4bf5d052a52e6198d59 upstream. As reported by Randy Dunlap: >> WARNING: unmet direct dependencies detected for DELL_SMBIOS >> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && (DCDBAS [=m] || >> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n) >> Selected by [y]: >> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && DMI [=y] >> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || >> ACPI_VIDEO [=n]=n) >> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y] >> Right now it's possible to set dell laptop to compile in but this causes dell-smbios to compile in which breaks if dcdbas is a module. Dell laptop shouldn't select dell-smbios anymore, but depend on it. Fixes: 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS) Reported-by: Randy Dunlap Signed-off-by: Mario Limonciello Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) Signed-off-by: Greg Kroah-Hartman commit 49dd3ac5255682f714814776ac6230cf085718dd Author: João Paulo Rechi Vita Date: Thu Apr 19 07:04:34 2018 -0700 platform/x86: asus-wireless: Fix NULL pointer dereference commit 9f0a93de9139c2b0a59299cd36b61564522458f8 upstream. When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem. This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __queue_work+0x8c/0x410 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015 RIP: 0010:__queue_work+0x8c/0x410 RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086 RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18 RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000 R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000 R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0 FS: 00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0 Call Trace: queue_work_on+0x38/0x40 led_state_set+0x2c/0x40 [asus_wireless] led_set_brightness_nopm+0x14/0x40 led_set_brightness+0x37/0x60 led_trigger_set+0xfc/0x1d0 led_classdev_unregister+0x32/0xd0 devm_led_classdev_release+0x11/0x20 release_nodes+0x109/0x1f0 devres_release_all+0x3c/0x50 device_release_driver_internal+0x16d/0x220 driver_detach+0x3f/0x80 bus_remove_driver+0x55/0xd0 driver_unregister+0x2c/0x40 acpi_bus_unregister_driver+0x15/0x20 asus_wireless_driver_exit+0x10/0xb7c [asus_wireless] SyS_delete_module+0x1da/0x2b0 entry_SYSCALL_64_fastpath+0x24/0x87 RIP: 0033:0x7f3181b65fd7 RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258 RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003 R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0 Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7 RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8 CR2: 0000000000000000 ---[ end trace 7aa4f4a232e9c39c ]--- Unregistering the led device on the remove callback before destroying the workqueue avoids this problem. https://bugzilla.kernel.org/show_bug.cgi?id=196097 Reported-by: Dun Hum Cc: stable@vger.kernel.org Signed-off-by: João Paulo Rechi Vita Signed-off-by: Darren Hart (VMware) Signed-off-by: Greg Kroah-Hartman commit 1e4bc8f857d05e2ea6a983f8357756c7c54fbb4d Author: Bin Liu Date: Mon Apr 30 11:20:54 2018 -0500 usb: musb: trace: fix NULL pointer dereference in musb_g_tx() commit 9aea9b6cc78d2b99b23d84fb2e0bc6e464c6569e upstream. The usb_request pointer could be NULL in musb_g_tx(), where the tracepoint call would trigger the NULL pointer dereference failure when parsing the members of the usb_request pointer. Move the tracepoint call to where the usb_request pointer is already checked to solve the issue. Fixes: fc78003e5345 ("usb: musb: gadget: add usb-request tracepoints") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman commit 3d5311a679dd2c2e48023de76ead896fde377590 Author: Bin Liu Date: Mon Apr 30 11:20:53 2018 -0500 usb: musb: host: fix potential NULL pointer dereference commit 2b63f1329df2cd814c1f8353fae4853ace6521d1 upstream. musb_start_urb() doesn't check the pass-in parameter if it is NULL. But in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is returned from first_qh(), which could be NULL. So wrap the musb_start_urb() call here with a if condition check to avoid the potential NULL pointer dereference. Fixes: f283862f3b5c ("usb: musb: NAK timeout scheme on bulk TX endpoint") Cc: stable@vger.kernel.org # v3.7+ Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman commit 8830fd0e64c0fa957ca876730797e8e6b9d4b768 Author: SZ Lin (林上智) Date: Thu Apr 26 14:28:31 2018 +0800 USB: serial: option: adding support for ublox R410M commit 4205cb01f6e9ef2ae6daa7be4e8ac1edeb4c9d64 upstream. This patch adds support for ublox R410M PID 0x90b2 USB modem to option driver, this module supports LTE Cat M1 / NB1. Interface layout: 0: QCDM/DIAG 1: ADB 2: AT 3: RMNET Signed-off-by: SZ Lin (林上智) Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit dc721bba179258098c8c97d22c5622076b5e3eab Author: Johan Hovold Date: Wed Mar 7 17:40:48 2018 +0100 USB: serial: option: reimplement interface masking commit c3a65808f04a8426481b63a4fbd9392f009f6330 upstream. Reimplement interface masking using device flags stored directly in the device-id table. This will make it easier to add and maintain device-id entries by using a more compact and readable notation compared to the current implementation (which manages pairs of masks in separate blacklist structs). Two convenience macros are used to flag an interface as either reserved or as not supporting modem-control requests: { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), .driver_info = NCTRL(0) | RSVD(3) }, For now, we limit the highest maskable interface number to seven, which allows for (up to 16) additional device flags to be added later should need arise. Note that this will likely need to be backported to stable in order to make future device-id backports more manageable. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 293cbb8835d46e0e9e460b6490d6a902b77e91cc Author: Alan Stern Date: Thu May 3 11:04:48 2018 -0400 USB: Accept bulk endpoints with 1024-byte maxpacket commit fb5ee84ea72c5f1b6cabdd1c9d6e8648995ca7c6 upstream. Some non-compliant high-speed USB devices have bulk endpoints with a 1024-byte maxpacket size. Although such endpoints don't work with xHCI host controllers, they do work with EHCI controllers. We used to accept these invalid sizes (with a warning), but we no longer do because of an unintentional change introduced by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors"). This patch restores the old behavior, so that people with these peculiar devices can use them without patching their kernels by hand. Signed-off-by: Alan Stern Suggested-by: Elvinas Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") CC: Signed-off-by: Greg Kroah-Hartman commit 00fa20042200aed6f561d1079b3c4a4f1aac273b Author: Mayank Rana Date: Fri Mar 23 10:05:33 2018 -0700 usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue commit 96bd39df29c29d348d65311e5954c0b7d3a2a790 upstream. dwc3_ep_dequeue() waits for completion of End Transfer command using wait_event_lock_irq(), which will release the dwc3->lock while waiting and reacquire after completion. This allows a potential race condition with ep_disable() which also removes all requests from started_list and pending_list. The check for NULL r->trb should catch this but currently it exits to the wrong 'out1' label which calls dwc3_gadget_giveback(). Since its list entry was already removed, if CONFIG_DEBUG_LIST is enabled a 'list_del corruption' bug is thrown since its next/prev pointers are already LIST_POISON1/2. If r->trb is NULL it should simply exit to 'out0'. Fixes: cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mayank Rana Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 7752b75589bee0f78aea5e1a6f2ca6082845677f Author: Greg Kroah-Hartman Date: Sun Apr 29 17:41:55 2018 +0200 USB: serial: visor: handle potential invalid device configuration commit 4842ed5bfcb9daf6660537d70503c18d38dbdbb8 upstream. If we get an invalid device configuration from a palm 3 type device, we might incorrectly parse things, and we have the potential to crash in "interesting" ways. Fix this up by verifying the size of the configuration passed to us by the device, and only if it is correct, will we handle it. Note that this also fixes an information leak of slab data. Reported-by: Andrey Konovalov Reviewed-by: Andrey Konovalov Signed-off-by: Greg Kroah-Hartman [ johan: add comment about the info leak ] Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit f5331826b0b7a5f2db56a9020ddbb8ce16acdfc0 Author: Mathias Nyman Date: Thu May 3 17:30:07 2018 +0300 xhci: Fix use-after-free in xhci_free_virt_device commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: Reported-by: Guenter Roeck Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 9fd572f55c537ed0a80d8aec970e5c66db6c291f Author: Ben Hutchings Date: Wed Apr 4 22:38:49 2018 +0200 test_firmware: fix setting old custom fw path back on exit, second try commit e538409257d0217a9bc715686100a5328db75a15 upstream. Commit 65c79230576 tried to clear the custom firmware path on exit by writing a single space to the firmware_class.path parameter. This doesn't work because nothing strips this space from the value stored and fw_get_filesystem_firmware() only ignores zero-length paths. Instead, write a null byte. Fixes: 0a8adf58475 ("test: add firmware_class loader test") Fixes: 65c79230576 ("test_firmware: fix setting old custom fw path back on exit") Signed-off-by: Ben Hutchings Acked-by: Luis R. Rodriguez Cc: stable Signed-off-by: Greg Kroah-Hartman commit c44b81bd7a47e0de466dc20f2d6febdf500cb007 Author: Sean Paul Date: Fri Apr 20 14:59:59 2018 -0400 drm/bridge: vga-dac: Fix edid memory leak commit 49ceda9de2da4d1827941d06701f3017c27c1855 upstream. edid should be freed once it's finished being used. Fixes: 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support") Cc: Rob Herring Cc: Sean Paul Cc: Maxime Ripard Cc: Archit Taneja Cc: Andrzej Hajda Cc: Laurent Pinchart Cc: # v4.9+ Reviewed-by: Maxime Ripard Reviewed-by: Laurent Pinchart Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul@chromium.org Signed-off-by: Greg Kroah-Hartman commit 1c08c35a7b77fda75a5e97e5721c6e8ffcd5d642 Author: Thomas Hellstrom Date: Thu Apr 26 09:59:30 2018 +0200 drm/vmwgfx: Fix a buffer object leak commit 13f149d47392782baafd96d54d4e65f3b5ca342f upstream. A buffer object leak was introduced when fixing a premature buffer object release. Fix this. Cc: Fixes: 73a88250b709 ("Fix a destoy-while-held mutex problem.") Signed-off-by: Thomas Hellstrom Reviewed-by: Deepak Rawat Reviewed-by: Sinclair Yeh Signed-off-by: Greg Kroah-Hartman commit eb88bd59fc06c64385fa1565685607dbbc8ae8ab Author: Boris Brezillon Date: Mon Apr 30 15:32:32 2018 +0200 drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced commit f7aef1c207092770d06d0df21dceafdca2b49c39 upstream. Commit b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") introduced a mechanism to mark some BOs as purgeable to allow the driver to drop them under memory pressure. In order to implement this feature we had to add a mechanism to mark BOs as currently used by a piece of hardware which materialized through the ->usecnt counter. Plane code is supposed to increment usecnt when it attaches a BO to a plane and decrement it when it's done with this BO, which was done in the ->prepare_fb() and ->cleanup_fb() hooks. The problem is, async page flip logic does not go through the regular atomic update path, and ->prepare_fb() and ->cleanup_fb() are not called in this case. Fix that by manually calling vc4_bo_{inc,dec}_usecnt() in the async-page-flip path. Note that all this should go away as soon as we get generic async page flip support in the core, in the meantime, this fix should do the trick. Fixes: b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") Reported-by: Peter Robinson Cc: Signed-off-by: Boris Brezillon Signed-off-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.brezillon@bootlin.com Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.brezillon@bootlin.com Signed-off-by: Greg Kroah-Hartman commit b71323883b999d1bd3a13a33d3ac7aa84d1edbc3 Author: ethanwu Date: Sun Apr 29 15:59:42 2018 +0800 btrfs: Take trans lock before access running trans in check_delayed_ref commit 998ac6d21cfd6efd58f5edf420bae8839dda9f2a upstream. In preivous patch: Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist We avoid starting btrfs transaction and get this information from fs_info->running_transaction directly. When accessing running_transaction in check_delayed_ref, there's a chance that current transaction will be freed by commit transaction after the NULL pointer check of running_transaction is passed. After looking all the other places using fs_info->running_transaction, they are either protected by trans_lock or holding the transactions. Fix this by using trans_lock and increasing the use_count. Fixes: e4c3b2dcd144 ("Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: ethanwu Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 26d909a40d90a982443824641abe4b29c885611f Author: Bharat Potnuri Date: Fri Apr 27 16:41:16 2018 +0530 iw_cxgb4: Atomically flush per QP HW CQEs commit 2df19e19ae90d94fd8724083f161f368a2797537 upstream. When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire corresponding QP lock before moving the CQEs into its corresponding SW queue and accessing the SQ contents for completing a WR. Ignore CQEs if corresponding QP is already flushed. Cc: stable@vger.kernel.org Signed-off-by: Potnuri Bharat Teja Reviewed-by: Steve Wise Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit d97b99a1de41fc9c10753147f6427e48bcc790ab Author: Sebastian Sanchez Date: Tue May 1 05:35:58 2018 -0700 IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used commit 45d924571a5e1329580811f2419da61b07ac3613 upstream. When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: # 4.9.x Reviewed-by: Mike Marciniszyn Reviewed-by: Michael J. Ruhl Signed-off-by: Sebastian Sanchez Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit a21794d6ba48e4f101b96696faec83aa5f57105a Author: Mike Marciniszyn Date: Tue May 1 05:35:51 2018 -0700 IB/hfi1: Fix loss of BECN with AHG commit 0a0bcb046b2f0c15b89f8c1b08ad3de601a83c66 upstream. AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2). When the code is trying to send a BECN, the use of the stored header will lose the BECN bit. Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations. Cc: # 4.14.x Reviewed-by: Michael J. Ruhl Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 20ed1e8be2010993570aecfe1f71db315cd621b2 Author: Mike Marciniszyn Date: Tue May 1 05:35:36 2018 -0700 IB/hfi1: Fix handling of FECN marked multicast packet commit f59fb9e05109b836230813e45f71c9ecc2d5dbe6 upstream. The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range. The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source lid doesn't match the chip programming. The send context will be halted and flush any other pending packets in the pio ring causing the CNP to not be sent. A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue. Fix these issues by: - Using the ports lid for as the SLID for responding to FECN marked UD packets - Insure pkey is always 16 bit in this and subordinate routines - Insure lids are 32 bits in this and subordinate routines Cc: # 4.14.x Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support") Reviewed-by: Don Hiatt Reviewed-by: Michael J. Ruhl Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit bc9962730381cb13615d2f19b9a16a4825a955ee Author: Randy Dunlap Date: Mon Apr 16 18:51:50 2018 -0700 infiniband: mlx5: fix build errors when INFINIBAND_USER_ACCESS=m commit b3fe6c62bc66868c45b5bb16050e6bcb333af337 upstream. Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y. The build error occurs when the mlx5 driver code attempts to use USER_ACCESS interfaces, which are built as a loadable module. Fixes these build errors: drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects' ../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree' drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree' Build-tested with multiple config combinations. Fixes: 8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs") Cc: stable@vger.kernel.org # reported against 4.16 Reported-by: kbuild test robot Signed-off-by: Randy Dunlap Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 384680646ce4ffe871772466d56deb3b8f6a5f55 Author: Danit Goldberg Date: Mon Apr 23 17:01:54 2018 +0300 IB/mlx5: Use unlimited rate when static rate is not supported commit 4f32ac2e452c2180cd2df581cbadac183e27ecd0 upstream. Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate, it would end up configuring rate of 2.5 GBps. Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration. Cc: # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by: Majd Dibbiny Signed-off-by: Danit Goldberg Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 2bda9b26f76da14bc1137b390d33b969742edc6d Author: SZ Lin (林上智) Date: Thu Apr 26 14:30:13 2018 +0800 NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2 commit 9306b38e42cb266f98bff6f6f4c1c652aa79ba45 upstream. This patch adds support for PID 0x90b2 of ublox R410M. qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer [/dev/cdc-wdm0] Device manufacturer retrieved: Manufacturer: 'u-blox' qmicli -d /dev/cdc-wdm0 --dms-get-model [/dev/cdc-wdm0] Device model retrieved: Model: 'SARA-R410M-02B' Signed-off-by: SZ Lin (林上智) Cc: stable Acked-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 01dd9e1987104af0f79f3d34ea79f3a91981c676 Author: Leon Romanovsky Date: Mon Apr 23 17:01:53 2018 +0300 RDMA/mlx5: Protect from shift operand overflow commit 002bf2282b2d7318e444dca9ffcb994afc5d5f15 upstream. Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller Reported-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit f9abec1296f693f41ee6bda012b9cb35ccb4ba4d Author: Leon Romanovsky Date: Thu Apr 26 15:37:48 2018 +0300 RDMA/mlx4: Add missed RSS hash inner header flag commit 4f9ca2d8686ecfdd40ca4f0294a3d94f83f05cea upstream. Despite being advertised to user space application, the RSS inner header flag was filtered by checks at the beginning of QP creation routine. Cc: # 4.15 Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions") Fixes: 07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers") Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 5761134decc01ce3b3fb6dc55caaa0211f9eed0f Author: Leon Romanovsky Date: Mon Apr 23 17:01:52 2018 +0300 RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow commit b4bd701ac469075d94ed9699a28755f2862252b9 upstream. Failure in rereg MR releases UMEM but leaves the MR to be destroyed by the user. As a result the following scenario may happen: "create MR -> rereg MR with failure -> call to rereg MR again" and hit "NULL-ptr deref or user memory access" errors. Ensure that rereg MR is only performed on a non-dead MR. Cc: syzkaller Cc: # 4.5 Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code") Reported-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 81199371746b267e49b996b5df246b19e61fc289 Author: Roland Dreier Date: Thu Apr 19 08:28:11 2018 -0700 RDMA/ucma: Allow resolving address w/o specifying source address commit 09abfe7b5b2f442a85f4c4d59ecf582ad76088d7 upstream. The RDMA CM will select a source device and address by consulting the routing table if no source address is passed into rdma_resolve_address(). Userspace will ask for this by passing an all-zero source address in the RESOLVE_IP command. Unfortunately the new check for non-zero address size rejects this with EINVAL, which breaks valid userspace applications. Fix this by explicitly allowing a zero address family for the source. Fixes: 2975d5de6428 ("RDMA/ucma: Check AF family prior resolving address") Cc: Signed-off-by: Roland Dreier Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 014d283be23ec22fabe51f4c790e174699f29821 Author: Raju Rangoju Date: Mon Apr 23 21:42:37 2018 +0530 RDMA/cxgb4: release hw resources on device removal commit 26bff1bd74a4f7417509a83295614e9dab995b2a upstream. The c4iw_rdev_close() logic was not releasing all the hw resources (PBL and RQT memory) during the device removal event (driver unload / system reboot). This can cause panic in gen_pool_destroy(). The module remove function will wait for all the hw resources to be released during the device removal event. Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref) Signed-off-by: Raju Rangoju Reviewed-by: Steve Wise Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman commit 5f308e6f0f77a8320fc84929f96198857a320b07 Author: Jiri Slaby Date: Tue Apr 24 09:43:44 2018 +0200 tools: power/acpi, revert to LD = gcc commit 755396163148b50fe1afb4bdd3365e47f3ff7a42 upstream. Commit 7ed1c1901fe5 (tools: fix cross-compile var clobbering) removed setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica (acpidump) in power/acpi: ld: unrecognized option '-D_LINUX' The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this particular change and let LD be $(CC) again. Note that the old behaviour was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by the commit 7ed1c1901fe5. We use $(CC) for that reason. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Jiri Slaby Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit b73fe29d72ad7f70245993d9e84613c3bfb40e6b Author: Darrick J. Wong Date: Mon Apr 16 23:07:45 2018 -0700 xfs: prevent creating negative-sized file via INSERT_RANGE commit 7d83fb14258b9961920cd86f0b921caaeb3ebe85 upstream. During the "insert range" fallocate operation, i_size grows by the specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as it should. But this comparison is done using the signed 'loff_t', and 'i_size + len' can wrap around to a negative value, causing the check to incorrectly pass, resulting in an inode with "negative" i_size. This is possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX. ext4 and f2fs don't run into this because they set a smaller s_maxbytes. Fix it by using subtraction instead. Reproducer: xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096" Fixes: a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: # v4.1+ Originally-From: Eric Biggers Signed-off-by: Eric Biggers Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong [darrick: fix signed integer addition overflow too] Signed-off-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman commit 709c26e9c81f4c600df7ec0d5749a90a87dc5081 Author: Ping-Ke Shih Date: Fri Apr 20 10:30:09 2018 +0800 rtlwifi: cleanup 8723be ant_sel definition commit af8a41cccf8f469165c6debc8fe07c5fd2ca501a upstream. Some HP laptops have only a single wifi antenna. This would not be a problem except that they were shipped with an incorrectly encoded EFUSE. It should have been possible to open the computer and transfer the antenna connection to the other terminal except that such action might void the warranty, and moving the antenna broke the Windows driver. The fix was to add a module option that would override the EFUSE encoding. That was done with commit c18d8f509571 ("rtlwifi: rtl8723be: Add antenna select module parameter"). There was still a problem with Bluetooth coexistence, which was addressed with commit baa170229095 ("rtlwifi: btcoexist: Implement antenna selection"). There were still problems, thus there were commit 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code") and commit 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code"). Despite all these attempts at fixing the problem, the code is not yet right. A proper fix is important as there are now instances of laptops having RTL8723DE chips with the same problem. The module parameter ant_sel is used to control antenna number and path. At present enum ANT_{X2,X1} is used to define the antenna number, but this choice is not intuitive, thus change to a new enum ANT_{MAIN,AUX} to make it more readable. This change showed examples where incorrect values were used. It was also possible to remove a workaround in halbtcoutsrc.c. The experimental results with single antenna connected to specific path are now as follows: ant_sel ANT_MAIN(#1) ANT_AUX(#2) 0 -8 -62 1 -62 -10 2 -6 -60 Signed-off-by: Ping-Ke Shih Fixes: c18d8f509571 ("rtlwifi: rtl8723be: Add antenna select module parameter") Fixes: baa170229095 ("rtlwifi: btcoexist: Implement antenna selection") Fixes: 0ff78adeef11 ("rtlwifi: rtl8723be: fix ant_sel code") Fixes: 6d6226928369 ("rtlwifi: btcoexist: Fix antenna selection code") Cc: Stable # 4.7+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman commit 6c965d69269a29487e5d0ab0de8692cbdf52b548 Author: Michel Dänzer Date: Tue May 1 15:24:11 2018 +0200 swiotlb: fix inversed DMA_ATTR_NO_WARN test commit 892a0be43edd63e1cd228af3453a064e9e94f08e upstream. The result was printing the warning only when we were explicitly asked not to. Cc: stable@vger.kernel.org Fixes: 0176adb004065d6815a8e67946752df4cd947c5b "swiotlb: refactor coherent buffer allocation" Signed-off-by: Michel Dänzer Reviewed-by: Christian König . Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman commit 35bc2e5d8e27fe3aca059ddf8e1ee993ce9ad785 Author: Vittorio Gambaletta (VittGam) Date: Wed Apr 25 15:22:13 2018 -0700 Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro commit f372b81101e6895252298e563d634d5e44ae81e7 upstream. This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click. The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here. Signed-off-by: Vittorio Gambaletta Signed-off-by: Salvatore Bellizzi Tested-by: Guenter Roeck Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit ebfe26bfb7a49c90ad1e849b835d943e823fddd2 Author: Dmitry Torokhov Date: Fri Apr 6 10:23:05 2018 -0700 Input: leds - fix out of bound access commit 6bd6ae639683c0b41f46990d5c64ff9fbfa019dc upstream. UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with led > LED_CHARGING: [ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds] [ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128 This happens because we were writing to the led structure before making sure that it exists. Reported-by: Tasos Sahanidis Tested-by: Tasos Sahanidis Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 2c4d568e96243b96411c809552e9068a230a11dc Author: Bryant G Ly Date: Tue Apr 17 10:33:21 2018 -0500 scsi: target: Fix fortify_panic kernel exception commit f5957dade4f373b04fa1f5315a489f18cc2c4cb4 upstream. memcmp() requires the two buffers passed as arguments to be at least 'size' bytes long, otherwise a fortify_panic will trigger. Use memchr_inv() instead of memcmp() to determine whether the received payload is zeroed or not. The bug was found by running a block backstore via LIO. [ 496.212958] Call Trace: [ 496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable) [ 496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock] [ 496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod] [ 496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis] [ 496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod] [ 496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod] [ 496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod] [ 496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod] [ 496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis] [ 496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580 [ 496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600 [ 496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0 [ 496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [mkp: tweaked commit message] Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by: Bryant G. Ly Reviewed-by: Steven Royer Tested-by: Taylor Jakobson Cc: Christoph Hellwig Cc: Nicholas Bellinger Cc: # v4.13+ Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit e9e663bd29c64bccdfe2e210c9ef1055cdc45303 Author: Mathieu Desnoyers Date: Thu Mar 15 08:44:24 2018 -0400 tracepoint: Do not warn on ENOMEM commit d66a270be3310d7aa132fec0cea77d3d32a0ff75 upstream. Tracepoint should only warn when a kernel API user does not respect the required preconditions (e.g. same tracepoint enabled twice, or called to remove a tracepoint that does not exist). Silence warning in out-of-memory conditions, given that the error is returned to the caller. This ensures that out-of-memory error-injection testing does not trigger warnings in tracepoint.c, which were seen by syzbot. Link: https://lkml.kernel.org/r/001a114465e241a8720567419a72@google.com Link: https://lkml.kernel.org/r/001a1140e0de15fc910567464190@google.com Link: http://lkml.kernel.org/r/20180315124424.32319-1-mathieu.desnoyers@efficios.com CC: Peter Zijlstra CC: Jiri Olsa CC: Arnaldo Carvalho de Melo CC: Alexander Shishkin CC: Namhyung Kim CC: stable@vger.kernel.org Fixes: de7b2973903c6 ("tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints") Reported-by: syzbot+9c0d616860575a73166a@syzkaller.appspotmail.com Reported-by: syzbot+4e9ae7fa46233396f64d@syzkaller.appspotmail.com Signed-off-by: Mathieu Desnoyers Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit c3a6ed72688b834cca9483c22754f27570c80829 Author: Matthew Wilcox Date: Tue Apr 24 14:02:57 2018 -0700 errseq: Always report a writeback error once commit b4678df184b314a2bd47d2329feca2c2534aa12b upstream. The errseq_t infrastructure assumes that errors which occurred before the file descriptor was opened are of no interest to the application. This turns out to be a regression for some applications, notably Postgres. Before errseq_t, a writeback error would be reported exactly once (as long as the inode remained in memory), so Postgres could open a file, call fsync() and find out whether there had been a writeback error on that file from another process. This patch changes the errseq infrastructure to report errors to all file descriptors which are opened after the error occurred, but before it was reported to any file descriptor. This restores the user-visible behaviour. Cc: stable@vger.kernel.org Fixes: 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting") Signed-off-by: Matthew Wilcox Reviewed-by: Jeff Layton Signed-off-by: Jeff Layton Signed-off-by: Greg Kroah-Hartman commit 9328c74e3389a879294f021401a8c8f2cb4987f8 Author: Takashi Iwai Date: Mon Apr 30 10:06:48 2018 +0200 ALSA: aloop: Add missing cable lock to ctl API callbacks commit 76b3421b39bd610546931fc923edcf90c18fa395 upstream. Some control API callbacks in aloop driver are too lazy to take the loopback->cable_lock and it results in possible races of cable access while it's being freed. It eventually lead to a UAF, as reported by fuzzer recently. This patch covers such control API callbacks and add the proper mutex locks. Reported-by: DaeRyong Jeong Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit dc7b7ad7d717fd599456817134f423c075eb2101 Author: Robert Rosengren Date: Mon Mar 26 07:24:49 2018 +0200 ALSA: aloop: Mark paused device as inactive commit 306a4f3ca7f3c7dfa473ebd19d66e40e59d99734 upstream. Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change. This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused. Signed-off-by: Robert Rosengren Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 0501ecb021e24b0dce468249718f500b65a7ae8f Author: Takashi Sakamoto Date: Sun Apr 29 15:01:46 2018 +0900 ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index commit 52759c0963510a2843774aac9b65ccaed3308dc0 upstream. At a commit f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls'), maximum size of payload for tx isochronous packet is cached to reduce the number of function calls. This cache was programmed to updated at a first callback of ohci1394 IR context. However, the maximum size is required to queueing packets before starting the isochronous context. As a result, the cached value is reused to queue packets in next time to starting the isochronous context. Then the cache is updated in a first callback of the isochronous context. This can cause kernel NULL pointer dereference in a below call graph: (sound/firewire/amdtp-stream.c) amdtp_stream_start() ->queue_in_packet() ->queue_packet() (drivers/firewire/core-iso.c) ->fw_iso_context_queue() ->struct fw_card_driver.queue_iso() (drivers/firewire/ohci.c) = ohci_queue_iso() ->queue_iso_packet_per_buffer() buffer->pages[page] The issued dereference occurs in a case that: - target unit supports different stream formats for sampling transmission frequency. - maximum length of payload for tx stream in a first trial is bigger than the length in a second trial. In this case, correct number of pages are allocated for DMA and the 'pages' array has enough elements, while index of the element is wrongly calculated according to the old value of length of payload in a call of 'queue_in_packet()'. Then it causes the issue. This commit fixes the critical bug. This affects all of drivers in ALSA firewire stack in Linux kernel v4.12 or later. [12665.302360] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [12665.302415] IP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] [12665.302439] PGD 0 [12665.302440] P4D 0 [12665.302450] [12665.302470] Oops: 0000 [#1] SMP PTI [12665.302487] Modules linked in: ... [12665.303096] CPU: 1 PID: 12760 Comm: jackd Tainted: P OE 4.13.0-38-generic #43-Ubuntu [12665.303154] Hardware name: /DH77DF, BIOS KCH7710H.86A.0069.2012.0224.1825 02/24/2012 [12665.303215] task: ffff9ce87da2ae80 task.stack: ffffb5b8823d0000 [12665.303258] RIP: 0010:ohci_queue_iso+0x47c/0x800 [firewire_ohci] [12665.303301] RSP: 0018:ffffb5b8823d3ab8 EFLAGS: 00010086 [12665.303337] RAX: ffff9ce4f4876930 RBX: 0000000000000008 RCX: ffff9ce88a3955e0 [12665.303384] RDX: 0000000000000000 RSI: 0000000034877f00 RDI: 0000000000000000 [12665.303427] RBP: ffffb5b8823d3b68 R08: ffff9ce8ccb390a0 R09: ffff9ce877639ab0 [12665.303475] R10: 0000000000000108 R11: 0000000000000000 R12: 0000000000000003 [12665.303513] R13: 0000000000000000 R14: ffff9ce4f4876950 R15: 0000000000000000 [12665.303554] FS: 00007f2ec467f8c0(0000) GS:ffff9ce8df280000(0000) knlGS:0000000000000000 [12665.303600] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12665.303633] CR2: 0000000000000030 CR3: 00000002dcf90004 CR4: 00000000000606e0 [12665.303674] Call Trace: [12665.303698] fw_iso_context_queue+0x18/0x20 [firewire_core] [12665.303735] queue_packet+0x88/0xe0 [snd_firewire_lib] [12665.303770] amdtp_stream_start+0x19b/0x270 [snd_firewire_lib] [12665.303811] start_streams+0x276/0x3c0 [snd_dice] [12665.303840] snd_dice_stream_start_duplex+0x1bf/0x480 [snd_dice] [12665.303882] ? vma_gap_callbacks_rotate+0x1e/0x30 [12665.303914] ? __rb_insert_augmented+0xab/0x240 [12665.303936] capture_prepare+0x3c/0x70 [snd_dice] [12665.303961] snd_pcm_do_prepare+0x1d/0x30 [snd_pcm] [12665.303985] snd_pcm_action_single+0x3b/0x90 [snd_pcm] [12665.304009] snd_pcm_action_nonatomic+0x68/0x70 [snd_pcm] [12665.304035] snd_pcm_prepare+0x68/0x90 [snd_pcm] [12665.304058] snd_pcm_common_ioctl1+0x4c0/0x940 [snd_pcm] [12665.304083] snd_pcm_capture_ioctl1+0x19b/0x250 [snd_pcm] [12665.304108] snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm] [12665.304131] do_vfs_ioctl+0xa8/0x630 [12665.304148] ? entry_SYSCALL_64_after_hwframe+0xe9/0x139 [12665.304172] ? entry_SYSCALL_64_after_hwframe+0xe2/0x139 [12665.304195] ? entry_SYSCALL_64_after_hwframe+0xdb/0x139 [12665.304218] ? entry_SYSCALL_64_after_hwframe+0xd4/0x139 [12665.304242] ? entry_SYSCALL_64_after_hwframe+0xcd/0x139 [12665.304265] ? entry_SYSCALL_64_after_hwframe+0xc6/0x139 [12665.304288] ? entry_SYSCALL_64_after_hwframe+0xbf/0x139 [12665.304312] ? entry_SYSCALL_64_after_hwframe+0xb8/0x139 [12665.304335] ? entry_SYSCALL_64_after_hwframe+0xb1/0x139 [12665.304358] SyS_ioctl+0x79/0x90 [12665.304374] ? entry_SYSCALL_64_after_hwframe+0x72/0x139 [12665.304397] entry_SYSCALL_64_fastpath+0x24/0xab [12665.304417] RIP: 0033:0x7f2ec3750ef7 [12665.304433] RSP: 002b:00007fff99e31388 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [12665.304465] RAX: ffffffffffffffda RBX: 00007fff99e312f0 RCX: 00007f2ec3750ef7 [12665.304494] RDX: 0000000000000000 RSI: 0000000000004140 RDI: 0000000000000007 [12665.304522] RBP: 0000556ebc63fd60 R08: 0000556ebc640560 R09: 0000000000000000 [12665.304553] R10: 0000000000000001 R11: 0000000000000246 R12: 0000556ebc63fcf0 [12665.304584] R13: 0000000000000000 R14: 0000000000000007 R15: 0000000000000000 [12665.304612] Code: 01 00 00 44 89 eb 45 31 ed 45 31 db 66 41 89 1e 66 41 89 5e 0c 66 45 89 5e 0e 49 8b 49 08 49 63 d4 4d 85 c0 49 63 ff 48 8b 14 d1 <48> 8b 72 30 41 8d 14 37 41 89 56 04 48 63 d3 0f 84 ce 00 00 00 [12665.304713] RIP: ohci_queue_iso+0x47c/0x800 [firewire_ohci] RSP: ffffb5b8823d3ab8 [12665.304743] CR2: 0000000000000030 [12665.317701] ---[ end trace 9d55b056dd52a19f ]--- Fixes: f91c9d7610a ('ALSA: firewire-lib: cache maximum length of payload to reduce function calls') Cc: # v4.12+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a4e6f696661b77bf8f141087add9f764a0d4d63f Author: Takashi Iwai Date: Thu Apr 26 09:17:45 2018 +0200 ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger() commit 8f22e52528cc372b218b5f100457469615c733ce upstream. The sequencer virmidi code has an open race at its output trigger callback: namely, virmidi keeps only one event packet for processing while it doesn't protect for concurrent output trigger calls. snd_virmidi_output_trigger() tries to process the previously unfinished event before starting encoding the given MIDI stream, but this is done without any lock. Meanwhile, if another rawmidi stream starts the output trigger, this proceeds further, and overwrites the event package that is being processed in another thread. This eventually corrupts and may lead to the invalid memory access if the event type is like SYSEX. The fix is just to move the spinlock to cover both the pending event and the new stream. The bug was spotted by a new fuzzer, RaceFuzzer. BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.kr Reported-by: DaeRyong Jeong Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 88d6bef51807efa1da36dbcedfb3c7285c193015 Author: Takashi Iwai Date: Wed May 2 08:48:46 2018 +0200 ALSA: pcm: Check PCM state at xfern compat ioctl commit f13876e2c33a657a71bcbb10f767c0951b165020 upstream. Since snd_pcm_ioctl_xfern_compat() has no PCM state check, it may go further and hit the sanity check pcm_sanity_check() when the ioctl is called right after open. It may eventually spew a kernel warning, as triggered by syzbot, depending on kconfig. The lack of PCM state check there was just an oversight. Although it's no real crash, the spurious kernel warning is annoying, so let's add the proper check. Reported-by: syzbot+1dac3a4f6bc9c1c675d4@syzkaller.appspotmail.com Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 30a8adcbc057604b2abcdbe80585b08afd3fb3bd Author: Takashi Iwai Date: Fri Apr 27 17:17:35 2018 +0200 ALSA: hda - Fix incorrect usage of IS_REACHABLE() commit 6a30abaa40b62aed46ef12ea4c16c48565bdb376 upstream. The commit c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input") simplified the dependencies with IS_REACHABLE() macro, but it broke due to its incorrect usage: it should have been IS_REACHABLE(CONFIG_INPUT) instead of IS_REACHABLE(INPUT). Fixes: c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input") Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 41fd9f89c01f9063fc97e3de3bd12968a6b60824 Author: Suzuki K Poulose Date: Mon Mar 26 15:12:49 2018 +0100 arm64: Add work around for Arm Cortex-A55 Erratum 1024718 commit ece1397cbc89c51914fae1aec729539cfd8bd62b upstream. Some variants of the Arm Cortex-55 cores (r0p0, r0p1, r1p0) suffer from an erratum 1024718, which causes incorrect updates when DBM/AP bits in a page table entry is modified without a break-before-make sequence. The work around is to skip enabling the hardware DBM feature on the affected cores. The hardware Access Flag management features is not affected. There are some other cores suffering from this errata, which could be added to the midr_list to trigger the work around. Cc: Catalin Marinas Cc: ckadabi@codeaurora.org Reviewed-by: Dave Martin Signed-off-by: Suzuki K Poulose Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 3fe89843c710603e79d23090b9b1a00c0cce3254 Author: Ard Biesheuvel Date: Mon Apr 23 11:16:56 2018 +0200 ACPI / button: make module loadable when booted in non-ACPI mode commit ac1e55b1fdb27c1b07a0a6fe519f1291ff1e7d40 upstream. Modules such as nouveau.ko and i915.ko have a link time dependency on acpi_lid_open(), and due to its use of acpi_bus_register_driver(), the button.ko module that provides it is only loadable when booted in ACPI mode. However, the ACPI button driver can be built into the core kernel as well, in which case the dependency can always be satisfied, and the dependent modules can be loaded regardless of whether the system was booted in ACPI mode or not. So let's fix this asymmetry by making the ACPI button driver loadable as a module even if not booted in ACPI mode, so it can provide the acpi_lid_open() symbol in the same way as when built into the kernel. Signed-off-by: Ard Biesheuvel [ rjw: Minor adjustments of comments, whitespace and names. ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit bcd905bce011598e5366aba2d28520d6a109b468 Author: Alexandre Frade Date: Wed May 2 11:31:13 2018 -0300 4.16.6-xanmod7 Signed-off-by: Alexandre Frade commit 9dc30ff9a115559cc55673d0b1d3c576402d073e Author: Greg Kroah-Hartman Date: Tue May 1 12:47:31 2018 -0700 Linux 4.16.7 commit 26da1f9b6b2c274b4999e2c348f3e1b6652fff4c Author: Rob Gardner Date: Fri Apr 20 12:48:25 2018 -0600 sparc64: Fix mistake in oradax license text commit d3c68d0b4183ddfa05577348a231dd117e6563df upstream. The license text in both oradax files mistakenly specifies "version 3" of the GNU General Public License. This is corrected to specify "version 2". Signed-off-by: Rob Gardner Signed-off-by: Jonathan Helman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 020d0df523770d905fbabb1e16062a0746fef37a Author: Marc Zyngier Date: Sun Jan 21 16:42:56 2018 +0000 arm/arm64: KVM: Add PSCI version selection API commit 85bd0ba1ff9875798fad94218b627ea9f768f3c3 upstream. Although we've implemented PSCI 0.1, 0.2 and 1.0, we expose either 0.1 or 1.0 to a guest, defaulting to the latest version of the PSCI implementation that is compatible with the requested version. This is no different from doing a firmware upgrade on KVM. But in order to give a chance to hypothetical badly implemented guests that would have a fit by discovering something other than PSCI 0.2, let's provide a new API that allows userspace to pick one particular version of the API. This is implemented as a new class of "firmware" registers, where we expose the PSCI version. This allows the PSCI version to be save/restored as part of a guest migration, and also set to any supported version if the guest requires it. Cc: stable@vger.kernel.org #4.16 Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 9023a578c1a807dd7103cd0ad61eeef56055878f Author: Brijesh Singh Date: Wed Feb 21 08:41:39 2018 -0600 crypto: ccp - add check to get PSP master only when PSP is detected commit 716c7c32eae4b8a45c4f5602b50453865929b670 upstream. Paulian reported the below kernel crash on Ryzen 5 system: BUG: unable to handle kernel NULL pointer dereference at 0000000000000073 RIP: 0010:.LC0+0x41f/0xa00 RSP: 0018:ffffa9968003bdd0 EFLAGS: 00010002 RAX: ffffffffb113b130 RBX: 0000000000000000 RCX: 00000000000005a7 RDX: 00000000000000ff RSI: ffff8b46dee651a0 RDI: ffffffffb1bd617c RBP: 0000000000000246 R08: 00000000000251a0 R09: 0000000000000000 R10: ffffd81f11a38200 R11: ffff8b52e8e0a161 R12: ffffffffb19db220 R13: 0000000000000007 R14: ffffffffb17e4888 R15: 5dccd7affc30a31e FS: 0000000000000000(0000) GS:ffff8b46dee40000(0000) knlGS:0000000000000000 CR2: 0000000000000073 CR3: 000080128120a000 CR4: 00000000003406e0 Call Trace: ? sp_get_psp_master_device+0x56/0x80 ? map_properties+0x540/0x540 ? psp_pci_init+0x20/0xe0 ? map_properties+0x540/0x540 ? sp_mod_init+0x16/0x1a ? do_one_initcall+0x4b/0x190 ? kernel_init_freeable+0x19b/0x23c ? rest_init+0xb0/0xb0 ? kernel_init+0xa/0x100 ? ret_from_fork+0x22/0x40 Since Ryzen does not support PSP/SEV firmware hence i->psp_data will NULL in all sp instances. In those cases, 'i' will point to the list head after list_for_each_entry(). Dereferencing the head will cause kernel crash. Add check to call get master device only when PSP/SEV is detected. Reported-by: Paulian Bogdan Marinca Cc: Borislav Petkov Cc: Tom Lendacky CC: Gary R Hook Cc: linux-kernel@vger.kernel.org Signed-off-by: Brijesh Singh Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit ae57e635613be1a0970c82453622527720eb2e0f Author: Thomas Gleixner Date: Tue Apr 24 21:22:18 2018 +0200 tick/sched: Do not mess with an enqueued hrtimer commit 1f71addd34f4c442bec7d7c749acc1beb58126f2 upstream. Kaike reported that in tests rdma hrtimers occasionaly stopped working. He did great debugging, which provided enough context to decode the problem. CPU 3 CPU 2 idle start sched_timer expires = 712171000000 queue->next = sched_timer start rdmavt timer. expires = 712172915662 lock(baseof(CPU3)) tick_nohz_stop_tick() tick = 716767000000 timerqueue_add(tmr) hrtimer_set_expires(sched_timer, tick); sched_timer->expires = 716767000000 <---- FAIL if (tmr->expires < queue->next->expires) hrtimer_start(sched_timer) queue->next = tmr; lock(baseof(CPU3)) unlock(baseof(CPU3)) timerqueue_remove() timerqueue_add() ts->sched_timer is queued and queue->next is pointing to it, but then ts->sched_timer.expires is modified. This not only corrupts the ordering of the timerqueue RB tree, it also makes CPU2 see the new expiry time of timerqueue->next->expires when checking whether timerqueue->next needs to be updated. So CPU2 sees that the rdma timer is earlier than timerqueue->next and sets the rdma timer as new next. Depending on whether it had also seen the new time at RB tree enqueue, it might have queued the rdma timer at the wrong place and then after removing the sched_timer the RB tree is completely hosed. The problem was introduced with a commit which tried to solve inconsistency between the hrtimer in the tick_sched data and the underlying hardware clockevent. It split out hrtimer_set_expires() to store the new tick time in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in the NOHZ + HIGHRES case the hrtimer might still be queued. Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets timer->expires after canceling the timer and move the hrtimer_set_expires() invocation into the NOHZ only code path which is not affected as it merily uses the hrtimer as next event storage so code pathes can be shared with the NOHZ + HIGHRES case. Fixes: d4af6d933ccf ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync") Reported-by: "Wan Kaike" Signed-off-by: Thomas Gleixner Acked-by: Frederic Weisbecker Cc: "Marciniszyn Mike" Cc: Anna-Maria Gleixner Cc: linux-rdma@vger.kernel.org Cc: "Dalessandro Dennis" Cc: "Fleck John" Cc: stable@vger.kernel.org Cc: Peter Zijlstra Cc: Frederic Weisbecker Cc: "Weiny Ira" Cc: "linux-rdma@vger.kernel.org" Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman commit c6a3a884fdfd1f92c9fde05d72ed1b66974a27f3 Author: Borislav Petkov Date: Sat Apr 21 10:19:30 2018 +0200 x86/microcode: Do not exit early from __reload_late() commit 09e182d17e8891dd73baba961a0f5a82e9274c97 upstream. Vitezslav reported a case where the "Timeout during microcode update!" panic would hit. After a deeper look, it turned out that his .config had CONFIG_HOTPLUG_CPU disabled which practically made save_mc_for_early() a no-op. When that happened, the discovered microcode patch wasn't saved into the cache and the late loading path wouldn't find any. This, then, lead to early exit from __reload_late() and thus CPUs waiting until the timeout is reached, leading to the panic. In hindsight, that function should have been written so it does not return before the post-synchronization. Oh well, I know better now... Fixes: bb8c13d61a62 ("x86/microcode: Fix CPU synchronization routine") Reported-by: Vitezslav Samel Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Tested-by: Vitezslav Samel Tested-by: Ashok Raj Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180418081140.GA2439@pc11.op.pod.cz Link: https://lkml.kernel.org/r/20180421081930.15741-2-bp@alien8.de Signed-off-by: Greg Kroah-Hartman commit 166e0b4343baa1d3bf27ef1649d8f58c589af5b1 Author: Borislav Petkov Date: Sat Apr 21 10:19:29 2018 +0200 x86/microcode/intel: Save microcode patch unconditionally commit 84749d83758af6576552046b215b9b7f37f9556b upstream. save_mc_for_early() was a no-op on !CONFIG_HOTPLUG_CPU but the generic_load_microcode() path saves the microcode patches it has found into the cache of patches which is used for late loading too. Regardless of whether CPU hotplug is used or not. Make the saving unconditional so that late loading can find the proper patch. Reported-by: Vitezslav Samel Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Tested-by: Vitezslav Samel Tested-by: Ashok Raj Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180418081140.GA2439@pc11.op.pod.cz Link: https://lkml.kernel.org/r/20180421081930.15741-1-bp@alien8.de Signed-off-by: Greg Kroah-Hartman commit b38de68183c3f51d47d538a29d50bdf4247d5e23 Author: Yazen Ghannam Date: Tue Apr 3 09:02:28 2018 -0500 x86/smpboot: Don't use mwait_play_dead() on AMD systems commit da6fa7ef67f07108a1b0cb9fd9e7fcaabd39c051 upstream. Recent AMD systems support using MWAIT for C1 state. However, MWAIT will not allow deeper cstates than C1 on current systems. play_dead() expects to use the deepest state available. The deepest state available on AMD systems is reached through SystemIO or HALT. If MWAIT is available, it is preferred over the other methods, so the CPU never reaches the deepest possible state. Don't try to use MWAIT to play_dead() on AMD systems. Instead, use CPUIDLE to enter the deepest state advertised by firmware. If CPUIDLE is not available then fallback to HALT. Signed-off-by: Yazen Ghannam Signed-off-by: Thomas Gleixner Reviewed-by: Borislav Petkov Cc: stable@vger.kernel.org Cc: Yazen Ghannam Link: https://lkml.kernel.org/r/20180403140228.58540-1-Yazen.Ghannam@amd.com Signed-off-by: Greg Kroah-Hartman commit 15e5ad9d043abe3e5a8c7e58af75920144c284e0 Author: Arnd Bergmann Date: Tue Apr 24 23:19:51 2018 +0200 x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds commit 1a512c0882bd311c5b5561840fcfbe4c25b8f319 upstream. A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout (as seen from user space) a few years ago: Originally, __BITS_PER_LONG was defined as 64 on x32, so we did not have padding after the 64-bit __kernel_time_t fields, After __BITS_PER_LONG got changed to 32, applications would observe extra padding. In other parts of the uapi headers we seem to have a mix of those expecting either 32 or 64 on x32 applications, so we can't easily revert the path that broke these two structures. Instead, this patch decouples x32 from the other architectures and moves it back into arch specific headers, partially reverting the even older commit 73a2d096fdf2 ("x86: remove all now-duplicate header files"). It's not clear whether this ever made any difference, since at least glibc carries its own (correct) copy of both of these header files, so possibly no application has ever observed the definitions here. Based on a suggestion from H.J. Lu, I tried out the tool from https://github.com/hjl-tools/linux-header to find other such bugs, which pointed out the same bug in statfs(), which also has a separate (correct) copy in glibc. Fixes: f4b4aae18288 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds") Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Gleixner Cc: "H . J . Lu" Cc: Jeffrey Walton Cc: stable@vger.kernel.org Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180424212013.3967461-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman commit 4b0110291ae1d618384cab105b1e2d208a31a6e3 Author: Josh Poimboeuf Date: Thu Mar 15 22:11:54 2018 -0500 objtool, perf: Fix GCC 8 -Wrestrict error commit 854e55ad289ef8888e7991f0ada85d5846f5afb9 upstream. Starting with recent GCC 8 builds, objtool and perf fail to build with the following error: ../str_error_r.c: In function ‘str_error_r’: ../str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict] snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err); The code seems harmless, but there's probably no benefit in printing the 'buf' pointer in this situation anyway, so just remove it to make GCC happy. Reported-by: Laura Abbott Signed-off-by: Josh Poimboeuf Tested-by: Laura Abbott Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: http://lkml.kernel.org/r/20180316031154.juk2uncs7baffctp@treble Signed-off-by: Arnaldo Carvalho de Melo Cc: Fredrik Schön Signed-off-by: Greg Kroah-Hartman commit 9b057f2fe69b803d3195313f03400eec19c80494 Author: Harry Wentland Date: Mon Apr 16 17:28:11 2018 -0400 drm/amd/display: Disallow enabling CRTC without primary plane with FB commit f2877656809386d7bc62c2b1c1b4e58404c486d4 upstream. The below commit "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2" introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, it now preserves it. Since DC is currently not equipped to handle this we need to fail such a commit, otherwise we might see a corrupted screen. This is based on Shirish's previous approach but avoids adding all planes to the new atomic state which leads to a full update in DC for any commit, and is not what we intend. Theoretically DM should be able to deal with states with fully populated planes, even for simple updates, such as cursor updates. This should still be addressed in the future. Signed-off-by: Harry Wentland Tested-by: Michel Dänzer Reviewed-by: Tony Cheng Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 2eea1dec478125ea888492123666feab0883255c Author: Harry Wentland Date: Thu Mar 8 22:05:35 2018 -0500 drm/amd/display: Don't read EDID in atomic_check commit c7b8de00384be49dc1617a838b0ce89a0235f319 upstream. We shouldn't attempt to read EDID in atomic_check. We really shouldn't even be modifying the connector object, or any other non-state object, but this is a start at least. Moving EDID cleanup to dm_dp_mst_connector_destroy from dm_dp_destroy_mst_connector to ensure the EDID is still available for headless mode. Signed-off-by: Harry Wentland Reviewed-by: Tony Cheng Acked-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit ae9b20eed6a7b688d533486b667cbc6a6f942e50 Author: Mikita Lipski Date: Wed Jan 10 10:01:38 2018 -0500 drm/amd/display: Fix deadlock when flushing irq commit ad64dc0137968f09800e58174bbfd5eac9fe5418 upstream. Lock irq table when reading a work in queue, unlock to flush the work, lock again till all tasks are cleared Signed-off-by: Mikita Lipski Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 53934ddc29fc1f5df377b11e4ef0c9929593c6cc Author: Imre Deak Date: Thu Apr 19 18:51:09 2018 +0300 drm/i915: Enable display WA#1183 from its correct spot commit ac315c621f01d4b8a53dec317c7ae322fd26ff38 upstream. The DMC FW specific part of display WA#1183 is supposed to be enabled whenever enabling DC5 or DC6, so move it to the DC6 enable function from the DC6 disable function. I noticed this after Daniel's patch to remove the unused skl_disable_dc6() function. Fixes: 53421c2fe99c ("drm/i915: Apply Display WA #1183 on skl, kbl, and cfl") Cc: Lucas De Marchi Cc: Rodrigo Vivi Cc: Ville Syrjälä Cc: Daniel Vetter Cc: Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180419155109.29451-1-imre.deak@intel.com (cherry picked from commit b49be6622f08187129561cff0409f7b06b33de57) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman commit 3dbfc2b1cbca7547e3a207110f1a1fc5494f1043 Author: Abhay Kumar Date: Wed Apr 18 13:37:07 2018 +0300 drm/i915/audio: set minimum CD clock to twice the BCLK commit 904e1b1ff4c70044334f395aa751c8e73fb42714 upstream. In GLK when the device boots with only 1366x768 panel without audio, HDA codec doesn't come up. In this case, the CDCLK is less than twice the BCLK. Even though audio isn't being enabled, having a too low CDCLK leads to audio probe failing altogether. Require CDCLK to be at least twice the BLCK regardless of audio. This is a minimal fix to improve things. Unfortunately, this a) leads to too high CDCLK being used when audio is not used, and b) is still not enough to fix audio probe when no outputs are connected at probe time. The proper fix would be to increase CDCLK dynamically from the audio component hooks. v2: - Address comment (Jani) - New design approach v3: - Typo fix on top of v1 v4 by Jani: rewrite commit message, add comment in code Cc: stable@vger.kernel.org Cc: Ville Syrjälä Cc: Dhinakaran Pandiyan Cc: Wenkai Du Reviewed-by: Wenkai Du Tested-by: Wenkai Du Acked-by: Ville Syrjälä Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102937 Signed-off-by: Abhay Kumar Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20180418103707.14645-1-jani.nikula@intel.com (cherry picked from commit 2a5b95b448485e143ec3e004eabe53b31db78eb3) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman commit a669a33f546c645422562ab32f9fce78c0957c66 Author: José Roberto de Souza Date: Wed Apr 18 16:41:58 2018 -0700 drm/i915/fbdev: Enable late fbdev initial configuration commit 0b551f1e0fc50ee4e3cde2dd639cb010dae5b997 upstream. If the initial fbdev configuration (intel_fbdev_initial_config()) runs and there still no sink connected it will cause drm_fb_helper_initial_config() to return 0 as no error happened (but internally the return is -EAGAIN). Because no framebuffer was allocated, when a sink is connected intel_fbdev_output_poll_changed() will not execute drm_fb_helper_hotplug_event() that would trigger another try to do the initial fbdev configuration. So here allowing drm_fb_helper_hotplug_event() to be executed when there is no framebuffer allocated and fbdev was not set up yet. This issue also happens when a MST DP sink is connected since boot, as the MST topology is discovered in parallel if intel_fbdev_initial_config() is executed before the first sink MST is discovered it will cause this same issue. This is a follow-up patch of https://patchwork.freedesktop.org/patch/196089/ Changes from v1: - not creating a dump framebuffer anymore, instead just allowing drm_fb_helper_hotplug_event() to execute when fbdev is not setup yet. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104158 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104425 Cc: Rodrigo Vivi Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Chris Wilson Signed-off-by: José Roberto de Souza Tested-by: Paul Menzel Tested-by: frederik # 4.15.17 Tested-by: Ian Pilcher Acked-by: Chris Wilson Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20180418234158.9388-1-jose.souza@intel.com (cherry picked from commit df9e6521749ab33cde306e8a4350b0ac7889220a) Signed-off-by: Joonas Lahtinen Signed-off-by: Greg Kroah-Hartman commit 34113b6b397be9193a6ebb27d88dff3303469bb4 Author: Nicolai Hähnle Date: Thu Apr 12 16:34:19 2018 +0200 drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders commit 75569c182e4f65cd8826a5853dc9cbca703cbd0e upstream. Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by: Nicolai Hähnle Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit f936b22ad2147038a68f4ca33dfcbee4286a5d2b Author: Ville Syrjälä Date: Tue Apr 24 16:02:50 2018 +0300 drm/edid: Reset more of the display info commit 1f6b8eef11c3d097bc8a6b2bbb868eb47ec6f7d8 upstream. We're currently failing to reset everything in display_info.hdmi which will potentially cause us to use stale information when swapping monitors. Eg. if the user replaces a HDMI 2.0 monitor with a HDMI 1.x monitor we will continue to think that the monitor supports scrambling. That will lead to a black screen since the HDMI 1.x monitor won't understand the scrambled signal. Fix the problem by clearing display_info.hdmi fully. And while at eliminate some duplicated code by calling drm_reset_display_info() in drm_add_display_info(). Cc: stable@vger.kernel.org Cc: Antony Chen Cc: Shashank Sharma Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180424130250.7028-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter Tested-by: Antony Chen Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman commit fdcdb842c9f30ce47d5e97ae3373e9e3f13f7e06 Author: Nicholas Piggin Date: Tue Apr 10 21:49:32 2018 +1000 rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops commit 682e6b4da5cbe8e9a53f979a58c2a9d7dc997175 upstream. The OPAL RTC driver does not sleep in case it gets OPAL_BUSY or OPAL_BUSY_EVENT from firmware, which causes large scheduling latencies, up to 50 seconds have been observed here when RTC stops responding (BMC reboot can do it). Fix this by converting it to the standard form OPAL_BUSY loop that sleeps. Fixes: 628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Nicholas Piggin Acked-by: Alexandre Belloni Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit a79a4ae44f9f103259784cff4cecf74b83889e24 Author: Shilpasri G Bhat Date: Wed Apr 25 16:29:31 2018 +0530 cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt commit c0f7f5b6c69107ca92909512533e70258ee19188 upstream. gpstate_timer_handler() uses synchronous smp_call to set the pstate on the requested core. This causes the below hard lockup: smp_call_function_single+0x110/0x180 (unreliable) smp_call_function_any+0x180/0x250 gpstate_timer_handler+0x1e8/0x580 call_timer_fn+0x50/0x1c0 expire_timers+0x138/0x1f0 run_timer_softirq+0x1e8/0x270 __do_softirq+0x158/0x3e4 irq_exit+0xe8/0x120 timer_interrupt+0x9c/0xe0 decrementer_common+0x114/0x120 -- interrupt: 901 at doorbell_global_ipi+0x34/0x50 LR = arch_send_call_function_ipi_mask+0x120/0x130 arch_send_call_function_ipi_mask+0x4c/0x130 smp_call_function_many+0x340/0x450 pmdp_invalidate+0x98/0xe0 change_huge_pmd+0xe0/0x270 change_protection_range+0xb88/0xe40 mprotect_fixup+0x140/0x340 SyS_mprotect+0x1b4/0x350 system_call+0x58/0x6c One way to avoid this is removing the smp-call. We can ensure that the timer always runs on one of the policy-cpus. If the timer gets migrated to a cpu outside the policy then re-queue it back on the policy->cpus. This way we can get rid of the smp-call which was being used to set the pstate on the policy->cpus. Fixes: 7bc54b652f13 ("timers, cpufreq/powernv: Initialize the gpstate timer as pinned") Cc: stable@vger.kernel.org # v4.8+ Reported-by: Nicholas Piggin Reported-by: Pridhiviraj Paidipeddi Signed-off-by: Shilpasri G Bhat Acked-by: Nicholas Piggin Acked-by: Viresh Kumar Acked-by: Vaidyanathan Srinivasan Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit a92595141c56d0d3887affe5aa9be4cb3199d47e Author: Daniel Kurtz Date: Fri Apr 6 17:21:53 2018 -0600 earlycon: Use a pointer table to fix __earlycon_table stride commit dd709e72cb934eefd44de8d9969097173fbf45dc upstream. Commit 99492c39f39f ("earlycon: Fix __earlycon_table stride") tried to fix __earlycon_table stride by forcing the earlycon_id struct alignment to 32 and asking the linker to 32-byte align the __earlycon_table symbol. This fix was based on commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") which tried a similar fix for the tracing subsystem. However, this fix doesn't quite work because there is no guarantee that gcc will place structures packed into an array format. In fact, gcc 4.9 chooses to 64-byte align these structs by inserting additional padding between the entries because it has no clue that they are supposed to be in an array. If we are unlucky, the linker will assign symbol "__earlycon_table" to a 32-byte aligned address which does not correspond to the 64-byte aligned contents of section "__earlycon_table". To address this same problem, the fix to the tracing system was subsequently re-implemented using a more robust table of pointers approach by commits: 3d56e331b653 ("tracing: Replace syscall_meta_data struct array with pointer array") 654986462939 ("tracepoints: Fix section alignment using pointer array") e4a9ea5ee7c8 ("tracing: Replace trace_event struct array with pointer array") Let's use this same "array of pointers to structs" approach for EARLYCON_TABLE. Fixes: 99492c39f39f ("earlycon: Fix __earlycon_table stride") Signed-off-by: Daniel Kurtz Suggested-by: Aaron Durbin Reviewed-by: Rob Herring Tested-by: Guenter Roeck Reviewed-by: Guenter Roeck Cc: stable Signed-off-by: Greg Kroah-Hartman commit 231d48c0c1479eb1709527ae1d2328c5e2aae7a5 Author: Thomas Richter Date: Wed Apr 18 09:14:36 2018 +0200 module: Fix display of wrong module .text address commit be71eda5383faa663efdba9ef54a6b8255e3c7f0 upstream. Reading file /proc/modules shows the correct address: [root@s35lp76 ~]# cat /proc/modules | egrep '^qeth_l2' qeth_l2 94208 1 - Live 0x000003ff80401000 and reading file /sys/module/qeth_l2/sections/.text [root@s35lp76 ~]# cat /sys/module/qeth_l2/sections/.text 0x0000000018ea8363 displays a random address. This breaks the perf tool which uses this address on s390 to calculate start of .text section in memory. Fix this by printing the correct (unhashed) address. Thanks to Jessica Yu for helping on this. Fixes: ef0010a30935 ("vsprintf: don't use 'restricted_pointer()' when not restricting") Cc: # v4.15+ Suggested-by: Linus Torvalds Signed-off-by: Thomas Richter Cc: Jessica Yu Signed-off-by: Jessica Yu Signed-off-by: Greg Kroah-Hartman commit e03d37c67253129983203cd52cbabbf6d4ef644f Author: Anatolij Gustschin Date: Sun Apr 15 11:33:08 2018 -0700 fpga-manager: altera-ps-spi: preserve nCONFIG state commit 881c93c0fb73328845898344208fa0bf0d62cac6 upstream. If the driver module is loaded when FPGA is configured, the FPGA is reset because nconfig is pulled low (low-active gpio inited with GPIOD_OUT_HIGH activates the signal which means setting its value to low). Init nconfig with GPIOD_OUT_LOW to prevent this. Signed-off-by: Anatolij Gustschin Acked-by: Alan Tull Signed-off-by: Moritz Fischer Cc: stable # 4.14+ Signed-off-by: Greg Kroah-Hartman commit f1ced8d09836927d70bf4d89ba9efebc7606fb36 Author: Hans de Goede Date: Wed Apr 18 15:24:49 2018 +0200 virt: vbox: Use __get_free_pages instead of kmalloc for DMA32 memory commit faf6a2a44164c0fb2c2a82692ab9051917514bce upstream. It is not possible to get DMA32 zone memory through kmalloc, causing the vboxguest driver to malfunction due to getting memory above 4G which the PCI device cannot handle. This commit changes the kmalloc calls where the 4G limit matters to using __get_free_pages() fixing vboxguest not working on x86_64 guests with more then 4G RAM. Cc: stable@vger.kernel.org Reported-by: Eloy Coto Pereiro Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman commit 9dcbe055249d69b0abec1e80a6bc97bd08ad0ba4 Author: Hans de Goede Date: Wed Apr 18 15:24:48 2018 +0200 virt: vbox: Add vbg_req_free() helper function commit f6f9885b0531163f72c7bf898a0ab1ba4c7d5de6 upstream. This is a preparation patch for fixing issues on x86_64 virtual-machines with more then 4G of RAM, atm we pass __GFP_DMA32 to kmalloc, but kmalloc does not honor that, so we need to switch to get_pages, which means we will not be able to use kfree to free memory allocated with vbg_alloc_req. While at it also remove a comment on a vbg_alloc_req call which talks about Windows (inherited from the vbox upstream cross-platform code). Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman commit 18693b5af06fb3ab453d924169885bf9a3c7f874 Author: Hans de Goede Date: Wed Apr 18 15:24:47 2018 +0200 virt: vbox: Move declarations of vboxguest private functions to private header commit 02cfde67df1f440c7c3c7038cc97992afb81804f upstream. Move the declarations of functions from vboxguest_utils.c which are only meant for vboxguest internal use from include/linux/vbox_utils.h to drivers/virt/vboxguest/vboxguest_core.h. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman commit b517f3893df80201772523fd7d58b191c70d9ee4 Author: Mika Westerberg Date: Fri Apr 20 15:22:02 2018 +0300 PCI / PM: Do not clear state_saved in pci_pm_freeze() when smart suspend is set commit ae860a19f37c686e7c5816e96640168b7174a096 upstream. If a driver uses DPM_FLAG_SMART_SUSPEND and the device is already runtime suspended when hibernate is started PCI core skips runtime resuming the device but still clears pci_dev->state_saved. After the hibernation image is written pci_pm_thaw_noirq() makes sure subsequent thaw phases for the device are also skipped leaving it runtime suspended with pci_dev->state_saved == false. When the device is eventually runtime resumed pci_pm_runtime_resume() restores config space by calling pci_restore_standard_config(), however because pci_dev->state_saved == false pci_restore_state() never actually restores the config space leaving the device in a state that is not what the driver might expect. For example here is what happens for intel-lpss I2C devices once the hibernation snapshot is taken: intel-lpss 0000:00:15.0: power state changed by ACPI to D0 intel-lpss 0000:00:1e.0: power state changed by ACPI to D3cold video LNXVIDEO:00: Restoring backlight state PM: hibernation exit i2c_designware i2c_designware.1: Unknown Synopsys component type: 0xffffffff i2c_designware i2c_designware.0: Unknown Synopsys component type: 0xffffffff i2c_designware i2c_designware.1: timeout in disabling adapter i2c_designware i2c_designware.0: timeout in disabling adapter Since PCI config space is not restored the device is still in D3hot making MMIO register reads return 0xffffffff. Fix this by clearing pci_dev->state_saved only if we actually end up runtime resuming the device. Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Signed-off-by: Mika Westerberg Cc: 4.15+ # 4.15+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit f23c684d479175af0b594d76d49f818ce8e48067 Author: Ilya Dryomov Date: Tue Apr 24 19:10:55 2018 +0200 libceph: validate con->state at the top of try_write() commit 9c55ad1c214d9f8c4594ac2c3fa392c1c32431a7 upstream. ceph_con_workfn() validates con->state before calling try_read() and then try_write(). However, try_read() temporarily releases con->mutex, notably in process_message() and ceph_con_in_msg_alloc(), opening the window for ceph_con_close() to sneak in, close the connection and release con->sock. When try_write() is called on the assumption that con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock gets passed to the networking stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_socket_sendmsg+0x5/0x20 Make sure con->state is valid at the top of try_write() and add an explicit BUG_ON for this, similar to try_read(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/23706 Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit 9f2fae5c9d7845c65a8822b4e2175223fbfb8873 Author: Ilya Dryomov Date: Mon Apr 23 15:25:10 2018 +0200 libceph: reschedule a tick in finish_hunting() commit 7b4c443d139f1d2b5570da475f7a9cbcef86740c upstream. If we go without an established session for a while, backoff delay will climb to 30 seconds. The keepalive timeout is also 30 seconds, so it's pretty easily hit after a prolonged hunting for a monitor: we don't get a chance to send out a keepalive in time, which means we never get back a keepalive ack in time, cutting an established session and attempting to connect to a different monitor every 30 seconds: [Sun Apr 1 23:37:05 2018] libceph: mon0 10.80.20.99:6789 session established [Sun Apr 1 23:37:36 2018] libceph: mon0 10.80.20.99:6789 session lost, hunting for new mon [Sun Apr 1 23:37:36 2018] libceph: mon2 10.80.20.103:6789 session established [Sun Apr 1 23:38:07 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon [Sun Apr 1 23:38:07 2018] libceph: mon1 10.80.20.100:6789 session established [Sun Apr 1 23:38:37 2018] libceph: mon1 10.80.20.100:6789 session lost, hunting for new mon [Sun Apr 1 23:38:37 2018] libceph: mon2 10.80.20.103:6789 session established [Sun Apr 1 23:39:08 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon The regular keepalive interval is 10 seconds. After ->hunting is cleared in finish_hunting(), call __schedule_delayed() to ensure we send out a keepalive after 10 seconds. Cc: stable@vger.kernel.org # 4.7+ Link: http://tracker.ceph.com/issues/23537 Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit acd10bf085b5a3187fd0298f5af1df23662b3b9a Author: Ilya Dryomov Date: Mon Apr 23 15:25:10 2018 +0200 libceph: un-backoff on tick when we have a authenticated session commit facb9f6eba3df4e8027301cc0e514dc582a1b366 upstream. This means that if we do some backoff, then authenticate, and are healthy for an extended period of time, a subsequent failure won't leave us starting our hunting sequence with a large backoff. Mirrors ceph.git commit d466bc6e66abba9b464b0b69687cf45c9dccf383. Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit ac0605c00222e40fc6a592241e6dae77a3360684 Author: Nicolin Chen Date: Sun Apr 8 16:57:35 2018 -0700 ASoC: fsl_esai: Fix divisor calculation failure at lower ratio commit c656941df9bc80f7ec65b92ca73c42f8b0b62628 upstream. When the desired ratio is less than 256, the savesub (tolerance) in the calculation would become 0. This will then fail the loop- search immediately without reporting any errors. But if the ratio is smaller enough, there is no need to calculate the tolerance because PM divisor alone is enough to get the ratio. So a simple fix could be just to set PM directly instead of going into the loop-search. Reported-by: Marek Vasut Signed-off-by: Nicolin Chen Tested-by: Marek Vasut Reviewed-by: Fabio Estevam Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 66b556241ae70b18739be2f1f5ec1045ec7f5eed Author: Tero Kristo Date: Thu Apr 12 11:23:15 2018 +0300 ASoC: dmic: Fix clock parenting commit 573eda59c772d11fc2b56d525dfb698b0f87ddb3 upstream. In 4.16 the clock hierarchy got changed by a5c82a09d876 ARM: dts: omap4: add clkctrl nodes The fck of dmic is no longer a mux clock, it's parent is. Signed-off-by: Tero Kristo Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown Cc: stable@vger.kernel.org # 4.16+ Signed-off-by: Greg Kroah-Hartman commit 9a17da5898581fa14389f29b83c8027e6f3cd99f Author: Stephan Mueller Date: Thu Apr 12 08:40:55 2018 +0200 crypto: drbg - set freed buffers to NULL commit eea0d3ea7546961f69f55b26714ac8fd71c7c020 upstream. During freeing of the internal buffers used by the DRBG, set the pointer to NULL. It is possible that the context with the freed buffers is reused. In case of an error during initialization where the pointers do not yet point to allocated memory, the NULL value prevents a double free. Cc: stable@vger.kernel.org Fixes: 3cfc3b9721123 ("crypto: drbg - use aligned buffers") Signed-off-by: Stephan Mueller Reported-by: syzbot+75397ee3df5c70164154@syzkaller.appspotmail.com Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 7b7f63318ba3cb408cda1d6a2cf954a17e9c2a0c Author: Alistair Popple Date: Tue Apr 17 19:11:28 2018 +1000 powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range commit d0cf9b561ca97d5245bb9e0c4774b7fadd897d67 upstream. The NPU has a limited number of address translation shootdown (ATSD) registers and the GPU has limited bandwidth to process ATSDs. This can result in contention of ATSD registers leading to soft lockups on some threads, particularly when invalidating a large address range in pnv_npu2_mn_invalidate_range(). At some threshold it becomes more efficient to flush the entire GPU TLB for the given MM context (PID) than individually flushing each address in the range. This patch will result in ranges greater than 2MB being converted from 32+ ATSDs into a single ATSD which will flush the TLB for the given PID on each GPU. Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alistair Popple Acked-by: Balbir Singh Tested-by: Balbir Singh Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit b05e88f124490ff047233dcdfc8b8f40bd5b94ff Author: Mahesh Salgaonkar Date: Mon Apr 23 10:29:27 2018 +0530 powerpc/mce: Fix a bug where mce loops on memory UE. commit 75ecfb49516c53da00c57b9efe48fa3f5504a791 upstream. The current code extracts the physical address for UE errors and then hooks it up into memory failure infrastructure. On successful extraction of physical address it wrongly sets "handled = 1" which means this UE error has been recovered. Since MCE handler gets return value as handled = 1, it assumes that error has been recovered and goes back to same NIP. This causes MCE interrupt again and again in a loop leading to hard lockup. Also, initialize phys_addr to ULONG_MAX so that we don't end up queuing undesired page to hwpoison. Without this patch we see: Severe Machine check interrupt [Recovered] NIP: [000000001002588c] PID: 7109 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffd2755940 Physical address: 000020181a080000 ... Severe Machine check interrupt [Recovered] NIP: [000000001002588c] PID: 7109 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffd2755940 Physical address: 000020181a080000 Severe Machine check interrupt [Recovered] NIP: [000000001002588c] PID: 7109 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffd2755940 Physical address: 000020181a080000 Memory failure: 0x20181a08: recovery action for dirty LRU page: Recovered Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned ... Watchdog CPU:38 Hard LOCKUP After this patch we see: Severe Machine check interrupt [Not recovered] NIP: [00007fffaae585f4] PID: 7168 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffaafe28ac Physical address: 00002017c0bd0000 find[7168]: unhandled signal 7 at 00007fffaae585f4 nip 00007fffaae585f4 lr 00007fffaae585e0 code 4 Memory failure: 0x2017c0bd: recovery action for dirty LRU page: Recovered Fixes: 01eaac2b0591 ("powerpc/mce: Hookup ierror (instruction) UE errors") Fixes: ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Mahesh Salgaonkar Signed-off-by: Balbir Singh Reviewed-by: Balbir Singh Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit 0f0c80f25d86fdd0561401a74b8702702d9b5688 Author: Balbir Singh Date: Fri Apr 6 15:24:23 2018 +1000 powerpc/mm: Flush cache on memory hot(un)plug commit fb5924fddf9ee31db04da7ad4e8c3434a387101b upstream. This patch adds support for flushing potentially dirty cache lines when memory is hot-plugged/hot-un-plugged. The support is currently limited to 64 bit systems. The bug was exposed when mappings for a device were actually hot-unplugged and plugged in back later. A similar issue was observed during the development of memtrace, but memtrace does it's own flushing of region via a custom routine. These patches do a flush both on hotplug/unplug to clear any stale data in the cache w.r.t mappings, there is a small race window where a clean cache line may be created again just prior to tearing down the mapping. The patches were tested by disabling the flush routines in memtrace and doing I/O on the trace file. The system immediately checkstops (quite reliablly if prior to the hot-unplug of the memtrace region, we memset the regions we are about to hot unplug). After these patches no custom flushing is needed in the memtrace code. Fixes: 9d5171a8f248 ("powerpc/powernv: Enable removal of memory for in memory tracing") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Balbir Singh Acked-by: Reza Arbab Reviewed-by: Rashmica Gupta Signed-off-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman commit b4ed55e75054264a2b528de44daf60f75a8e8f56 Author: Geert Uytterhoeven Date: Sun Apr 8 11:02:34 2018 +0200 slimbus: Fix out-of-bounds access in slim_slicesize() commit e33bbe69149b802c0c77bfb822685772f85388ca upstream. With gcc-4.1.2: slimbus/messaging.c: In function ‘slim_slicesize’: slimbus/messaging.c:186: warning: statement with no effect Indeed, clamp() is a macro not operating in-place, but returning the clamped value. Hence the value is not clamped at all, which may lead to an out-of-bounds access. Fix this by assigning the clamped value. Fixes: afbdcc7c384b0d44 ("slimbus: Add messaging APIs to slimbus framework") Signed-off-by: Geert Uytterhoeven Cc: stable Signed-off-by: Greg Kroah-Hartman commit f9a0250441217ea042705872d5aa54f31dd1dff3 Author: Marc Zyngier Date: Wed Apr 4 14:48:24 2018 +0100 KVM: arm/arm64: Close VMID generation race commit f0cf47d939d0b4b4f660c5aaa4276fa3488f3391 upstream. Before entering the guest, we check whether our VMID is still part of the current generation. In order to avoid taking a lock, we start with checking that the generation is still current, and only if not current do we take the lock, recheck, and update the generation and VMID. This leaves open a small race: A vcpu can bump up the global generation number as well as the VM's, but has not updated the VMID itself yet. At that point another vcpu from the same VM comes in, checks the generation (and finds it not needing anything), and jumps into the guest. At this point, we end-up with two vcpus belonging to the same VM running with two different VMIDs. Eventually, the VMID used by the second vcpu will get reassigned, and things will really go wrong... A simple solution would be to drop this initial check, and always take the lock. This is likely to cause performance issues. A middle ground is to convert the spinlock to a rwlock, and only take the read lock on the fast path. If the check fails at that point, drop it and acquire the write lock, rechecking the condition. This ensures that the above scenario doesn't occur. Cc: stable@vger.kernel.org Reported-by: Mark Rutland Tested-by: Shannon Zhao Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 9cf7ca0bc28caf8f99389c816eccc29a753cc881 Author: Thor Thayer Date: Mon Mar 26 14:50:00 2018 -0500 ARM: socfpga_defconfig: Remove QSPI Sector 4K size force commit 6e8fe39989720b87439fee7817a5ca362b16d931 upstream. Remove QSPI Sector 4K size force which is causing QSPI boot problems with the JFFS2 root filesystem. Fixes the following error: "Magic bitmask 0x1985 not found at ..." Cc: stable@vger.kernel.org Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen Signed-off-by: Greg Kroah-Hartman commit 66679a5badca6b153ed09723b8f516c00a623c07 Author: Linus Walleij Date: Tue Apr 17 10:53:11 2018 +0200 ARM: dts: Fix NAS4220B pin config commit 1c3bc8fb10c1803f8651911722ed584db3dfb0f2 upstream. The DTS file for the NAS4220B had the pin config for the ethernet interface set to the pins in the SL3512 SoC while this system is using SL3516. Fix it by referencing the right SL3516 pins instead of the SL3512 pins. Cc: stable@vger.kernel.org Cc: Hans Ulli Kroll Reported-by: Andreas Fiedler Reported-by: Roman Yeryomin Tested-by: Roman Yeryomin Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman commit 064edf1191f5e0255ba3f030400b07abf2a6fe99 Author: Geert Uytterhoeven Date: Tue Apr 10 15:21:45 2018 +0200 ARM: amba: Don't read past the end of sysfs "driver_override" buffer commit d2ffed5185df9d8d9ccd150e4340e3b6f96a8381 upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count + 1 bytes for printing. Cfr. commits 4efe874aace57dba ("PCI: Don't read past the end of sysfs "driver_override" buffer") and bf563b01c2895a4b ("driver core: platform: Don't read past the end of "driver_override" buffer"). Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by: Geert Uytterhoeven Reviewed-by: Todd Kjos Cc: stable Signed-off-by: Greg Kroah-Hartman commit 9c1c4f09f70d7f543f7495e1f047b23a561f00de Author: Geert Uytterhoeven Date: Tue Apr 10 15:21:44 2018 +0200 ARM: amba: Fix race condition with driver_override commit 6a7228d90d42bcacfe38786756ba62762b91c20a upstream. The driver_override implementation is susceptible to a race condition when different threads are reading vs storing a different driver override. Add locking to avoid this race condition. Cfr. commits 6265539776a0810b ("driver core: platform: fix race condition with driver_override") and 9561475db680f714 ("PCI: Fix race condition with driver_override"). Fixes: 3cf385713460eb2b ("ARM: 8256/1: driver coamba: add device binding path 'driver_override'") Signed-off-by: Geert Uytterhoeven Reviewed-by: Todd Kjos Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 89828294a11ffcb17c484f6de34d435573b3b2e1 Author: Geert Uytterhoeven Date: Tue Apr 10 15:21:43 2018 +0200 ARM: amba: Make driver_override output consistent with other buses commit 5f53624662eaac89598641cee6cd54fc192572d9 upstream. For AMBA devices with unconfigured driver override, the "driver_override" sysfs virtual file is empty, while it contains "(null)" for platform and PCI devices. Make AMBA consistent with other buses by dropping the test for a NULL pointer. Note that contrary to popular belief, sprintf() handles NULL pointers fine; they are printed as "(null)". Signed-off-by: Geert Uytterhoeven Cc: stable Reviewed-by: Todd Kjos Signed-off-by: Greg Kroah-Hartman commit 82202231719ea1678659d4fd4273e2e82c67a199 Author: Evan Wang Date: Fri Apr 6 16:55:34 2018 +0200 PCI: aardvark: Fix PCIe Max Read Request Size setting commit fc31c4e347c9dad50544d01d5ee98b22c7df88bb upstream. There is an obvious typo issue in the definition of the PCIe maximum read request size: a bit shift is directly used as a value, while it should be used to shift the correct value. Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Cc: Signed-off-by: Evan Wang Reviewed-by: Victor Gu Reviewed-by: Nadav Haklai [Thomas: tweak commit log.] Signed-off-by: Thomas Petazzoni Signed-off-by: Lorenzo Pieralisi Signed-off-by: Greg Kroah-Hartman commit 3bc325e2f2c52f87ed9318b702fb06001e46122d Author: Victor Gu Date: Fri Apr 6 16:55:33 2018 +0200 PCI: aardvark: Use ISR1 instead of ISR0 interrupt in legacy irq mode commit 3430f924a62905891c8fa9a3b97ea52007795bc3 upstream. The Aardvark has two interrupts sets: - first set is bit[23:16] of PCIe ISR 0 register(RD0074840h) - second set is bit[11:8] of PCIe ISR 1 register(RD0074848h) Only one set should be used, while another set should be masked. The second set, ISR1, is more advanced, the Legacy INT_X status bit is asserted once Assert_INTX message is received, and de-asserted after Deassert_INTX message is received which matches what the driver is currently doing in the ->irq_mask() and ->irq_unmask() functions. The ISR0 requires additional work to deassert the interrupt, which the driver does not currently implement, therefore it needs fixing. Update the driver to use ISR1 register set, fixing current implementation. Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Link: https://bugzilla.kernel.org/show_bug.cgi?id=196339 Signed-off-by: Victor Gu [Thomas: tweak commit log.] Signed-off-by: Thomas Petazzoni [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Evan Wang Reviewed-by: Nadav Haklai Cc: Signed-off-by: Greg Kroah-Hartman commit 63a0d030b4e819a6664dedc611907ad55a2e2376 Author: Victor Gu Date: Fri Apr 6 16:55:32 2018 +0200 PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf() commit 4fa3999ee672c54a5498ce98e20fe3fdf9c1cbb4 upstream. When setting the PIO_ADDR_LS register during a configuration read, we were properly passing the device number, function number and register number, but not the bus number, causing issues when reading the configuration of PCIe devices. Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Cc: Signed-off-by: Victor Gu Reviewed-by: Wilson Ding Reviewed-by: Nadav Haklai [Thomas: tweak commit log.] Signed-off-by: Thomas Petazzoni Signed-off-by: Lorenzo Pieralisi Signed-off-by: Greg Kroah-Hartman commit aecdeed7d53900c70069e83aa6ed23fddd8ee4e9 Author: Victor Gu Date: Fri Apr 6 16:55:31 2018 +0200 PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf() commit 660661afcd40ed7f515ef3369721ed58e80c0fc5 upstream. The PCI configuration space read/write functions were special casing the situation where PCI_SLOT(devfn) != 0, and returned PCIBIOS_DEVICE_NOT_FOUND in this case. However, while this is what is intended for the root bus, it is not intended for the child busses, as it prevents discovering devices with PCI_SLOT(x) != 0. Therefore, we return PCIBIOS_DEVICE_NOT_FOUND only if we're on the root bus. Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Cc: Signed-off-by: Victor Gu Reviewed-by: Wilson Ding Reviewed-by: Nadav Haklai [Thomas: tweak commit log.] Signed-off-by: Thomas Petazzoni Signed-off-by: Lorenzo Pieralisi Signed-off-by: Greg Kroah-Hartman commit 75aa5dfac8c7784242671c34d1cd73c60557943b Author: Martijn Coenen Date: Wed Mar 28 11:14:50 2018 +0200 ANDROID: binder: prevent transactions into own process. commit 7aa135fcf26377f92dc0680a57566b4c7f3e281b upstream. This can't happen with normal nodes (because you can't get a ref to a node you own), but it could happen with the context manager; to make the behavior consistent with regular nodes, reject transactions into the context manager by the process owning it. Reported-by: syzbot+09e05aba06723a94d43d@syzkaller.appspotmail.com Signed-off-by: Martijn Coenen Cc: stable Signed-off-by: Greg Kroah-Hartman commit 1d086a5b66c50a6cbb65b9a94d2ac7a48016129e Author: Steve French Date: Sun Apr 22 19:51:22 2018 -0500 SMB311: Fix reconnect commit 0d5ec281c0175d10f8d9be4d4a9c5fb37767ed00 upstream. The preauth hash was not being recalculated properly on reconnect of SMB3.11 dialect mounts (which caused access denied repeatedly on auto-reconnect). Fixes: 8bd68c6e47ab ("CIFS: implement v3.11 preauth integrity") Signed-off-by: Steve French CC: Stable Reviewed-by: Ronnie Sahlberg Signed-off-by: Greg Kroah-Hartman commit 9779bb71071280b5ac91ee1093aef980b08cc786 Author: Cornelia Huck Date: Fri Apr 20 10:24:04 2018 +0200 vfio: ccw: process ssch with interrupts disabled commit 3368e547c52b96586f0edf9657ca12b94d8e61a7 upstream. When we call ssch, an interrupt might already be pending once we return from the START SUBCHANNEL instruction. Therefore we need to make sure interrupts are disabled while holding the subchannel lock until after we're done with our processing. Cc: stable@vger.kernel.org #v4.12+ Reviewed-by: Dong Jia Shi Acked-by: Halil Pasic Acked-by: Pierre Morel Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman commit 7859056bc73dea2c3714b00c83b253d4c22bf7b6 Author: Alan Jenkins Date: Thu Apr 12 19:11:58 2018 +0100 block: do not use interruptible wait anywhere commit 1dc3039bc87ae7d19a990c3ee71cfd8a9068f428 upstream. When blk_queue_enter() waits for a queue to unfreeze, or unset the PREEMPT_ONLY flag, do not allow it to be interrupted by a signal. The PREEMPT_ONLY flag was introduced later in commit 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably"). Note the SCSI device is resumed asynchronously, i.e. after un-freezing userspace tasks. So that commit exposed the bug as a regression in v4.15. A mysterious SIGBUS (or -EIO) sometimes happened during the time the device was being resumed. Most frequently, there was no kernel log message, and we saw Xorg or Xwayland killed by SIGBUS.[1] [1] E.g. https://bugzilla.redhat.com/show_bug.cgi?id=1553979 Without this fix, I get an IO error in this test: # dd if=/dev/sda of=/dev/null iflag=direct & \ while killall -SIGUSR1 dd; do sleep 0.1; done & \ echo mem > /sys/power/state ; \ sleep 5; killall dd # stop after 5 seconds The interruptible wait was added to blk_queue_enter in commit 3ef28e83ab15 ("block: generic request_queue reference counting"). Before then, the interruptible wait was only in blk-mq, but I don't think it could ever have been correct. Reviewed-by: Bart Van Assche Cc: stable@vger.kernel.org Signed-off-by: Alan Jenkins Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit c9071d6aff3c74cd0f2a2080a69aab296b87c00d Author: Jens Axboe Date: Tue Apr 17 17:08:52 2018 -0600 bfq-iosched: ensure to clear bic/bfqq pointers when preparing request commit 72961c4e6082be79825265d9193272b8a1634dec upstream. Even if we don't have an IO context attached to a request, we still need to clear the priv[0..1] pointers, as they could be pointing to previously used bic/bfqq structures. If we don't do so, we'll either corrupt memory on dispatching a request, or cause an imbalance in counters. Inspired by a fix from Kees. Reported-by: Oleksandr Natalenko Reported-by: Kees Cook Cc: stable@vger.kernel.org Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 066d25c39bdd180c32c1700a1d2479bcf0bd8e59 Author: Jianchao Wang Date: Tue Apr 17 11:46:20 2018 +0800 blk-mq: start request gstate with gen 1 commit f4560231ec42092c6662acccabb28c6cac9f5dfb upstream. rq->gstate and rq->aborted_gstate both are zero before rqs are allocated. If we have a small timeout, when the timer fires, there could be rqs that are never allocated, and also there could be rq that has been allocated but not initialized and started. At the moment, the rq->gstate and rq->aborted_gstate both are 0, thus the blk_mq_terminate_expired will identify the rq is timed out and invoke .timeout early. For scsi, this will cause scsi_times_out to be invoked before the scsi_cmnd is not initialized, scsi_cmnd->device is still NULL at the moment, then we will get crash. Cc: Bart Van Assche Cc: Tejun Heo Cc: Ming Lei Cc: Martin Steigerwald Cc: stable@vger.kernel.org Signed-off-by: Jianchao Wang Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 180409cd88f961901a2bdd9879b02a85f4276c92 Author: Mahesh Rajashekhara Date: Tue Apr 17 17:03:12 2018 +0530 scsi: sd: Defer spinning up drive while SANITIZE is in progress commit 505aa4b6a8834a2300971c5220c380c3271ebde3 upstream. A drive being sanitized will return NOT READY / ASC 0x4 / ASCQ 0x1b ("LOGICAL UNIT NOT READY. SANITIZE IN PROGRESS"). Prevent spinning up the drive until this condition clears. [mkp: tweaked commit message] Signed-off-by: Mahesh Rajashekhara Cc: Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 254b8fd89053489a74cc1f30d324c2be10205cfc Author: Bart Van Assche Date: Mon Apr 16 18:04:41 2018 -0700 scsi: sd_zbc: Avoid that resetting a zone fails sporadically commit ccce20fc7968d546fb1e8e147bf5cdc8afc4278a upstream. Since SCSI scanning occurs asynchronously, since sd_revalidate_disk() is called from sd_probe_async() and since sd_revalidate_disk() calls sd_zbc_read_zones() it can happen that sd_zbc_read_zones() is called concurrently with blkdev_report_zones() and/or blkdev_reset_zones(). That can cause these functions to fail with -EIO because sd_zbc_read_zones() e.g. sets q->nr_zones to zero before restoring it to the actual value, even if no drive characteristics have changed. Avoid that this can happen by making the following changes: - Protect the code that updates zone information with blk_queue_enter() and blk_queue_exit(). - Modify sd_zbc_setup_seq_zones_bitmap() and sd_zbc_setup() such that these functions do not modify struct scsi_disk before all zone information has been obtained. Note: since commit 055f6e18e08f ("block: Make q_usage_counter also track legacy requests"; kernel v4.15) the request queue freezing mechanism also affects legacy request queues. Fixes: 89d947561077 ("sd: Implement support for ZBC devices") Signed-off-by: Bart Van Assche Cc: Jens Axboe Cc: Damien Le Moal Cc: Christoph Hellwig Cc: Hannes Reinecke Cc: stable@vger.kernel.org # v4.16 Reviewed-by: Damien Le Moal Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 908097cb15f7e9344a56fed14ab0578acc824a7c Author: Dmitry Vyukov Date: Wed Apr 11 17:22:43 2018 +0200 kobject: don't use WARN for registration failures commit 3e14c6abbfb5c94506edda9d8e2c145d79375798 upstream. This WARNING proved to be noisy. The function still returns an error and callers should handle it. That's how most of kernel code works. Downgrade the WARNING to pr_err() and leave WARNINGs for kernel bugs. Signed-off-by: Dmitry Vyukov Reported-by: syzbot+209c0f67f99fec8eb14b@syzkaller.appspotmail.com Reported-by: syzbot+7fb6d9525a4528104e05@syzkaller.appspotmail.com Reported-by: syzbot+2e63711063e2d8f9ea27@syzkaller.appspotmail.com Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Cc: stable Signed-off-by: Greg Kroah-Hartman commit 0dc43695e81bacc3186b144f80a49495bf75e43a Author: Miquel Raynal Date: Wed Apr 25 16:16:32 2018 +0200 mtd: rawnand: marvell: fix the chip-select DT parsing logic commit f6997bec6af43396ff530caee79e178d32774a49 upstream. The block responsible of parsing the DT for the number of chip-select lines uses an 'if/else if/else if' block. The content of the second and third 'else if' conditions are: 1/ the actual condition to enter the sub-block and 2/ the operation to do in this sub-block. [...] else if (condition1_to_enter && action1() == failed) raise_error(); else if (condition2_to_enter && action2() == failed) raise_error(); [...] In case of failure, the sub-block is entered and an error raised. Otherwise, in case of success, the code would continue erroneously in the next 'else if' statement because it did not failed (and did not enter the first 'else if' sub-block). The first 'else if' refers to legacy bindings while the second 'else if' refers to new bindings. The second 'else if', which is entered erroneously, checks for the 'reg' property, which, for old bindings, does not mean anything because it would not be the number of CS available, but the regular register map of almost any DT node. This being said, the content of the 'reg' property being the register map offset and length, it has '2' values, so the number of CS in this situation is assumed to be '2'. When running nand_scan_ident() with 2 CS, the core will check for an array of chips. It will first issue a RESET and then a READ_ID. Of course this will trigger two timeouts because there is no chip in front of the second CS: [ 1.367460] marvell-nfc f2720000.nand: Timeout on CMDD (NDSR: 0x00000080) [ 1.474292] marvell-nfc f2720000.nand: Timeout on CMDD (NDSR: 0x00000280) Indeed, this is harmless and the core will then assume there is only one valid CS. Fix the logic in the whole block by entering each sub-block just on the 'is legacy' condition, doing the action inside the sub-block. This way, when the action succeeds, the whole block is left. Furthermore, for both the old bindings and the new bindings the same logic was applied to retrieve the number of CS lines: using of_get_property() to get a size in bytes, converted in the actual number of lines by dividing it per sizeof(u32) (4 bytes). This is fine for the 'reg' property which is a list of the CS IDs but not for the 'num-cs' property which is directly the value of the number of CS. Anyway, no existing DT uses another value than 'num-cs = <1>' and no other value has ever been supported by the old driver (pxa3xx_nand.c). Remove this condition and apply a number of 1 CS anyway, as already described in the bindings. Finally, the 'reg' property of a 'nand' node (with the new bindings) gives the IDs of each CS line in use. marvell_nand.c driver first look at the number of CS lines that are present in this property. Better use of_property_count_elems_of_size() than dividing by 4 the size of the number of bytes returned by of_get_property(). Fixes: 02f26ecf8c772 ("mtd: nand: add reworked Marvell NAND controller driver") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Tested-by: Chris Packham Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit 6442d0b0a9c698eb64dd15002725a137cdd132ad Author: Marc Gonzalez Date: Thu Apr 5 14:57:59 2018 +0200 mtd: rawnand: tango: Fix struct clk memory leak commit 007b4e8b705a4eff184d567c5a8b496622f9e116 upstream. Use devm_clk_get() to let Linux manage struct clk memory. Fixes: 6956e2385a16 ("add tango NAND flash controller support") Cc: stable@vger.kernel.org Reported-by: Xidong Wang Signed-off-by: Marc Gonzalez Reviewed-by: Miquel Raynal Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit f80cef33b3402412ee5f215afc3b341b9bd58ebc Author: Joakim Tjernlund Date: Thu Mar 1 14:39:41 2018 +0100 mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block. commit 7b70eb14392a7cf505f9b358d06c33b5af73d1e7 upstream. Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Taken from cfi_cmdset_0001 driver. Signed-off-by: Joakim Tjernlund Cc: Reviewed-by: Richard Weinberger Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit f94fd0418ded42edf403639fc434de1b966bfd77 Author: Joakim Tjernlund Date: Thu Mar 1 14:39:40 2018 +0100 mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug. commit 46a16a2283f9e678a4e26829175e0c37a5191860 upstream. Some Micron chips does not work well wrt Erase suspend for boot blocks. This avoids the issue by not allowing Erase suspend for the boot blocks for the 28F00AP30(1GBit) chip. Signed-off-by: Joakim Tjernlund Cc: Reviewed-by: Richard Weinberger Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit 230e7a3d6928c4e978158a61ede376376af66582 Author: Joakim Tjernlund Date: Thu Mar 1 14:39:39 2018 +0100 mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block. commit 6510bbc88e3258631831ade49033537081950605 upstream. Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Signed-off-by: Joakim Tjernlund Cc: Reviewed-by: Richard Weinberger Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit 93769755b454173accd81037372d6078318cbe80 Author: Thor Thayer Date: Mon Apr 23 12:45:11 2018 -0500 mtd: spi-nor: cadence-quadspi: Fix page fault kernel panic commit 47016b341fc3b3fd4909e058c6fa38f165b53646 upstream. The current Cadence QSPI driver caused a kernel panic when loading a Root Filesystem from QSPI. The problem was caused by reading more bytes than needed because the QSPI operated on 4 bytes at a time. [ 7.947754] spi_nor_read[1048]:from 0x037cad74, len 1 [bfe07fff] [ 7.956247] cqspi_read[910]:offset 0x58502516, buffer=bfe07fff [ 7.956247] [ 7.966046] Unable to handle kernel paging request at virtual address bfe08002 [ 7.973239] pgd = eebfc000 [ 7.975931] [bfe08002] *pgd=2fffb811, *pte=00000000, *ppte=00000000 Notice above how only 1 byte needed to be read but by reading 4 bytes into the end of a mapped page, an unrecoverable page fault occurred. This patch uses a temporary buffer to hold the 4 bytes read and then copies only the bytes required into the buffer. A min() function is used to limit the length to prevent buffer overflows. Request testing of this patch on other platforms. This was tested on the Intel Arria10 SoCFPGA DevKit. Fixes: 0cf1725676a97fc8 ("mtd: spi-nor: cqspi: Fix build on arches missing readsl/writesl") Signed-off-by: Thor Thayer Cc: Reviewed-by: Marek Vasut Signed-off-by: Boris Brezillon Signed-off-by: Greg Kroah-Hartman commit 5f6d0b56778f16ca0b4d90630e4e56b8f3364ffc Author: Kailang Yang Date: Wed Apr 25 17:07:27 2018 +0800 ALSA: hda/realtek - change the location for one of two front mics commit 65811834ba56e9ed88117cf6c09880416c9951ab upstream. On this Lenovo ThinkCentre machine. There are two front mics, we change the location for one of them. Relation: f33f79f3d0e5 ("ALSA: hda/realtek - change the location for one of two front microphones") Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8b9ea8183d73d96f125aa31e21f87a24f54e96d4 Author: Kailang Yang Date: Wed Apr 25 16:05:27 2018 +0800 ALSA: hda/realtek - Update ALC255 depop optimize commit ab3b8e5159b5335c81ba2d09ee5054d4a1b5a7a6 upstream. Add ALC255 its own depop functions for alc_init and alc_shutup. Assign it to ALC256 usage. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 0264b06fbb66dce47467338e474caa65fcdbbe32 Author: Kailang Yang Date: Wed Apr 25 15:31:52 2018 +0800 ALSA: hda/realtek - Add some fixes for ALC233 commit ea04a1dbf8b1d6af759d58e705636fde48583f8f upstream. Fill COEF to change EAPD to verb control. Assigned codec type. This is an additional fix over 92f974df3460 ("ALSA: hda/realtek - New vendor ID for ALC233"). [ More notes: according to Kailang, the chip is 10ec:0235 bonding for ALC233b, which is equivalent with ALC255. It's only used for Lenovo. The chip needs no alc_process_coef_fw() for headset unlike ALC255. ] Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a1565d2f1d7de31bd37be69699f3b226a8a91799 Author: Takashi Iwai Date: Tue Apr 24 07:50:50 2018 +0200 ALSA: hda: Hardening for potential Spectre v1 commit 69fa6f19b95597618ab30438a27b67ad93daa7c7 upstream. As recently Smatch suggested, one place in HD-audio hwdep ioctl codes may expand the array directly from the user-space value with speculation: sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps' As get_wcaps() itself is a fairly frequently called inline function, and there is only one single call with a user-space value, we replace only the latter one to open-code locally with array_index_nospec() hardening in this patch. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 535e541cb72d55d34dc2bb4cec22b1fe4421d635 Author: Takashi Iwai Date: Tue Apr 24 07:31:54 2018 +0200 ALSA: seq: oss: Hardening for potential Spectre v1 commit 8d218dd8116695ecda7164f97631c069938aa22e upstream. As Smatch recently suggested, a few places in OSS sequencer codes may expand the array directly from the user-space value with speculation, namely there are a significant amount of references to either info->ch[] or dp->synths[] array: sound/core/seq/oss/seq_oss_event.c:315 note_on_event() warn: potential spectre issue 'info->ch' (local cap) sound/core/seq/oss/seq_oss_event.c:362 note_off_event() warn: potential spectre issue 'info->ch' (local cap) sound/core/seq/oss/seq_oss_synth.c:470 snd_seq_oss_synth_load_patch() warn: potential spectre issue 'dp->synths' (local cap) sound/core/seq/oss/seq_oss_event.c:293 note_on_event() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_event.c:353 note_off_event() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_synth.c:506 snd_seq_oss_synth_sysex() warn: potential spectre issue 'dp->synths' sound/core/seq/oss/seq_oss_synth.c:580 snd_seq_oss_synth_ioctl() warn: potential spectre issue 'dp->synths' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. We may put array_index_nospec() at each place, but here we take a different approach: - For dp->synths[], change the helpers to retrieve seq_oss_synthinfo pointer directly instead of the array expansion at each place - For info->ch[], harden in a normal way, as there are only a couple of places As a result, the existing helper, snd_seq_oss_synth_is_valid() is replaced with snd_seq_oss_synth_info(). Also, we cover MIDI device where a similar array expansion is done, too, although it wasn't reported by Smatch. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6f1f68c383c638fb84effb9370c48fe936bc9586 Author: Takashi Iwai Date: Tue Apr 24 07:26:59 2018 +0200 ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device commit f5e94b4c6ebdabe0f602d796e0430180927521a0 upstream. When get_synthdev() is called for a MIDI device, it returns the fixed midi_synth_dev without the use refcounting. OTOH, the caller is supposed to unreference unconditionally after the usage, so this would lead to unbalanced refcount. This patch corrects the behavior and keep up the refcount balance also for the MIDI synth device. Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 81c88e2219f0200513fe7889ac362df0f71290c0 Author: David Henningsson Date: Sat Apr 21 14:57:40 2018 +0200 ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr commit f853dcaae2f5bbe021161e421bd1576845bae8f6 upstream. It looks like a simple mistake that this struct member was forgotten. Audio_tstamp isn't used much, and on some archs (such as x86) this ioctl is not used by default, so that might be the reason why this has slipped for so long. Fixes: 4eeaaeaea1ce ("ALSA: core: add hooks for audio timestamps") Signed-off-by: David Henningsson Reviewed-by: Takashi Sakamoto Cc: # v3.8+ Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8c3aa80f45e442c046f8dc0babd723b4b58ff223 Author: Jeffery Miller Date: Fri Apr 20 23:20:46 2018 -0500 ALSA: pcm: Return negative delays from SNDRV_PCM_IOCTL_DELAY. commit 912e4c332037e7ed063c164985c36fb2b549ea3a upstream. The commit c2c86a97175f ("ALSA: pcm: Remove set_fs() in PCM core code") changed SNDRV_PCM_IOCTL_DELAY to return an inconsistent error instead of a negative delay. Originally the call would succeed and return the negative delay. The Chromium OS Audio Server (CRAS) gets confused and hangs when the error is returned instead of the negative delay. Help CRAS avoid the issue by rolling back the behavior to return a negative delay instead of an error. Fixes: c2c86a97175f ("ALSA: pcm: Remove set_fs() in PCM core code") Signed-off-by: Jeffery Miller Cc: # v4.13+ Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 2b4b27a1bac63b396b1f61b28469cb3f99f3c515 Author: Takashi Iwai Date: Tue Apr 24 07:45:56 2018 +0200 ALSA: control: Hardening for potential Spectre v1 commit 088e861edffb84879cf0c0d1b02eda078c3a0ffe upstream. As recently Smatch suggested, a few places in ALSA control core codes may expand the array directly from the user-space value with speculation: sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd' sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd' sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. In this patch, we put array_index_nospec() to the common snd_ctl_get_ioff*() helpers instead of each caller. These helpers are also referred from some drivers, too, and basically all usages are to calculate the array index from the user-space value, hence it's better to cover there. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8aa74bf9932b4315bbed5a2393c28b75426c207e Author: Takashi Iwai Date: Tue Apr 24 08:04:41 2018 +0200 ALSA: rme9652: Hardening for potential Spectre v1 commit f526afcd8f71945c23ce581d7864ace93de8a4f7 upstream. As recently Smatch suggested, one place in RME9652 driver may expand the array directly from the user-space value with speculation: sound/pci/rme9652/rme9652.c:2074 snd_rme9652_channel_info() warn: potential spectre issue 'rme9652->channel_map' (local cap) This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4f5eb29aaaf9774db39250e966de6c96807523c5 Author: Takashi Iwai Date: Tue Apr 24 08:03:14 2018 +0200 ALSA: hdspm: Hardening for potential Spectre v1 commit 10513142a7114d251670361ad40cba2c61403406 upstream. As recently Smatch suggested, a couple of places in HDSP MADI driver may expand the array directly from the user-space value with speculation: sound/pci/rme9652/hdspm.c:5717 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_out' (local cap) sound/pci/rme9652/hdspm.c:5734 snd_hdspm_channel_info() warn: potential spectre issue 'hdspm->channel_map_in' (local cap) This patch puts array_index_nospec() for hardening against them. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 76bfa9d87ca937de137a2fed8e8438635e53d234 Author: Takashi Iwai Date: Tue Apr 24 08:01:48 2018 +0200 ALSA: asihpi: Hardening for potential Spectre v1 commit f9d94b57e30fd1575b4935045b32d738668aa74b upstream. As recently Smatch suggested, a couple of places in ASIHPI driver may expand the array directly from the user-space value with speculation: sound/pci/asihpi/hpimsginit.c:70 hpi_init_response() warn: potential spectre issue 'res_size' (local cap) sound/pci/asihpi/hpioctl.c:189 asihpi_hpi_ioctl() warn: potential spectre issue 'adapters' This patch puts array_index_nospec() for hardening against them. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 3ba9bf597c94d3b5b23cd87aa2eaf476327b1bcc Author: Takashi Iwai Date: Tue Apr 24 07:56:07 2018 +0200 ALSA: opl3: Hardening for potential Spectre v1 commit 7f054a5bee0987f1e2d4e59daea462421c76f2cb upstream. As recently Smatch suggested, one place in OPL3 driver may expand the array directly from the user-space value with speculation: sound/drivers/opl3/opl3_synth.c:476 snd_opl3_set_voice() warn: potential spectre issue 'snd_opl3_regmap' This patch puts array_index_nospec() for hardening against it. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6229f5d025a85dfcf09dae1a8d6f13b8be5c0534 Author: Takashi Iwai Date: Wed Apr 25 16:19:13 2018 +0200 ALSA: hda - Skip jack and others for non-existing PCM streams commit 8a7d6003df41cb16f6b3b620da044fbd92d2f5ee upstream. When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited number of devices available, and HD-audio, especially with HDMI/DP codec, will fail to create more than two devices. The driver warns about the lack of such devices and skips the PCM device creations, but the HDMI driver still tries to create the corresponding JACK, SPDIF and ELD controls even for the non-existing PCM substreams. This results in confusion on user-space, and even may break the operation. Similarly, Intel HDMI/DP codec builds the ELD notification from i915 graphics driver, and this may be broken if a notification is sent for the non-existing PCM stream. This patch adds the check of the existence of the assigned PCM substream in the both scenarios above, and skips the further operation if the PCM substream is not assigned. Fixes: 9152085defb6 ("ALSA: hda - add DP MST audio support") Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit ff44c6ccc906aaabfbfef179750f7bb0fc72acca Author: Takashi Sakamoto Date: Thu Apr 26 22:00:29 2018 +0900 ALSA: dice: fix error path to destroy initialized stream data commit 0f925660a7bc49b269c163249a5d06da3a0c7b0a upstream. In error path of snd_dice_stream_init_duplex(), stream data for incoming packet can be left to be initialized. This commit fixes it. Fixes: 436b5abe2224 ('ALSA: dice: handle whole available isochronous streams') Cc: # v4.6+ Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 99e55dd174116dd18365b16f65657dcfffe1a135 Author: Takashi Sakamoto Date: Sun Apr 22 21:19:24 2018 +0900 ALSA: dice: fix OUI for TC group commit 10412c420af9ba1f3de8483a95d360e5eb5bfc84 upstream. OUI for TC Electronic is 0x000166, for TC GROUP A/S. 0x001486 is for Echo Digital Audio Corporation. Fixes: 7cafc65b3aa1 ('ALSA: dice: force to add two pcm devices for listed models') Cc: # v4.6+ Reference: http://standards-oui.ieee.org/oui/oui.txt Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 1c1bf699609881cf769a7201861d782f20da884b Author: Long Li Date: Tue Apr 17 12:17:08 2018 -0700 cifs: smbd: Don't use RDMA read/write when signing is used commit bb4c0419476bd3982ba802f0f49de83cd79532d8 upstream. SMB server will not sign data transferred through RDMA read/write. When signing is used, it's a good idea to have all the data signed. In this case, use RDMA send/recv for all data transfers. This will degrade performance as this is not generally configured in RDMA environemnt. So warn the user on signing and RDMA send/recv. Signed-off-by: Long Li Acked-by: Ronnie Sahlberg Cc: stable@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit e6d578474222a886b24894fa7cbdc51c69da1952 Author: Long Li Date: Tue Apr 17 12:17:07 2018 -0700 cifs: smbd: Avoid allocating iov on the stack commit 8bcda1d2a79da4ab84162574eee2c9f6e1a12a03 upstream. It's not necessary to allocate another iov when going through the buffers in smbd_send() through RDMA send. Remove it to reduce stack size. Thanks to Matt for spotting a printk typo in the earlier version of this. CC: Matt Redfearn Signed-off-by: Long Li Acked-by: Ronnie Sahlberg Cc: stable@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 986a29df8a208cb7b6fb8bfa75aae93146cce5d8 Author: Tetsuo Handa Date: Wed Apr 25 20:12:31 2018 +0900 tty: Use __GFP_NOFAIL for tty_ldisc_get() commit bcdd0ca8cb8730573afebcaae4138f8f4c8eaa20 upstream. syzbot is reporting crashes triggered by memory allocation fault injection at tty_ldisc_get() [1]. As an attempt to handle OOM in a graceful way, we have tried commit 5362544bebe85071 ("tty: don't panic on OOM in tty_set_ldisc()"). But we reverted that attempt by commit a8983d01f9b7d600 ("Revert "tty: don't panic on OOM in tty_set_ldisc()"") due to reproducible crash. We should spend resource for finding and fixing race condition bugs rather than complicate error paths for 2 * sizeof(void *) bytes allocation failure. [1] https://syzkaller.appspot.com/bug?id=489d33fa386453859ead58ff5171d43772b13aa3 Signed-off-by: Tetsuo Handa Reported-by: syzbot Cc: Michal Hocko Cc: Vegard Nossum Cc: Dmitry Vyukov Cc: Jiri Slaby Cc: Peter Hurley Cc: One Thousand Gnomes Cc: Linus Torvalds Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit fea8914c6e76d9b9f8e358e26e516a5efca25e74 Author: Tetsuo Handa Date: Mon Apr 16 20:06:34 2018 +0900 tty: Avoid possible error pointer dereference at tty_ldisc_restore(). commit 598c2d41ff44889dd8eced4f117403e472158d85 upstream. syzbot is reporting crashes [1] triggered by memory allocation failure at tty_ldisc_get() from tty_ldisc_restore(). While syzbot stops at WARN_ON() due to panic_on_warn == true, panic_on_warn == false will after all trigger an OOPS by dereferencing old->ops->num if IS_ERR(old) == true. We can simplify tty_ldisc_restore() as three calls (old->ops->num, N_TTY, N_NULL) to tty_ldisc_failto() in addition to avoiding possible error pointer dereference. If someone reports kernel panic triggered by forcing all memory allocations for tty_ldisc_restore() to fail, we can consider adding __GFP_NOFAIL for tty_ldisc_restore() case. [1] https://syzkaller.appspot.com/bug?id=6ac359c61e71d22e06db7f8f88243feb11d927e7 Reported-by: syzbot+40b7287c2dc987c48c81@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Dmitry Vyukov Cc: Johannes Weiner Cc: Alan Cox Cc: Christoph Hellwig Cc: Michal Hocko Cc: stable Signed-off-by: Greg Kroah-Hartman commit 6e27774540ce9e932bfe1d717986a5a4f4189a90 Author: Tony Lindgren Date: Sat Apr 7 10:19:51 2018 -0700 tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set commit b2d89ad9c9682e795ed6eeb9ed455789ad6cedf1 upstream. At least on droid 4 with control channel in ADM mode, there is no response to Modem Status Command (MSC). Currently gsmtty_modem_update() expects to have data in dlci->modem_rx unless debug & 2 is set. This means that on droid 4, things only work if debug & 2 is set. Let's fix the issue by ignoring empty dlci->modem_rx for ADM mode. In the AMD mode, CMD_MSC will never respond and gsm_process_modem() won't get called to set dlci->modem_rx. And according to ts_127010v140000p.pdf, MSC is only relevant if basic option is chosen, so let's test for that too. Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") Cc: linux-serial@vger.kernel.org Cc: Alan Cox Cc: Dan Williams Cc: Jiri Prchal Cc: Jiri Slaby Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Nazzareno Trimarchi Cc: Michael Scott Cc: Pavel Machek Cc: Peter Hurley Cc: Russ Gorby Cc: Sascha Hauer Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Cc: stable Signed-off-by: Greg Kroah-Hartman commit 0c42476401257618765689807347e1e13ff70276 Author: Tony Lindgren Date: Sat Apr 7 10:19:50 2018 -0700 tty: n_gsm: Fix long delays with control frame timeouts in ADM mode commit e9ec22547986dd32c5c70da78107ce35dbff1344 upstream. Commit ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") added support for DLCI to stay in Asynchronous Disconnected Mode (ADM). But we still get long delays waiting for commands to other DLCI to complete: --> 5) C: SABM(P) Q> 0) C: UIH(F) Q> 0) C: UIH(F) Q> 0) C: UIH(F) ... This happens because gsm_control_send() sets cretries timer to T2 that is by default set to 34. This will cause resend for T2 times for the control frame. In ADM mode, we will never get a response so the control frame, so retries are just delaying all the commands. Let's fix the issue by setting DLCI_MODE_ADM flag after detecting the ADM mode for the control DLCI. Then we can use that in gsm_control_send() to set retries to 1. This means the control frame will be sent once allowing the other end at an opportunity to switch from ADM to ABM mode. Note that retries will be decremented in gsm_control_retransmit() so we don't want to set it to 0 here. Fixes: ea3d8465ab9b ("tty: n_gsm: Allow ADM response in addition to UA for control dlci") Cc: linux-serial@vger.kernel.org Cc: Alan Cox Cc: Dan Williams Cc: Jiri Prchal Cc: Jiri Slaby Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Nazzareno Trimarchi Cc: Michael Scott Cc: Pavel Machek Cc: Peter Hurley Cc: Russ Gorby Cc: Sascha Hauer Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Cc: stable Signed-off-by: Greg Kroah-Hartman commit cb7740dbe9906c0934b205a0063cd1d36b64e1d9 Author: Tetsuo Handa Date: Thu Apr 5 19:40:16 2018 +0900 tty: Don't call panic() at tty_ldisc_init() commit 903f9db10f18f735e62ba447147b6c434b6af003 upstream. syzbot is reporting kernel panic [1] triggered by memory allocation failure at tty_ldisc_get() from tty_ldisc_init(). But since both tty_ldisc_get() and caller of tty_ldisc_init() can cleanly handle errors, tty_ldisc_init() does not need to call panic() when tty_ldisc_get() failed. [1] https://syzkaller.appspot.com/bug?id=883431818e036ae6a9981156a64b821110f39187 Signed-off-by: Tetsuo Handa Reported-by: syzbot Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman commit 60f68e071897c80ea403138cb5ae10c9a5ef501f Author: Gerd Hoffmann Date: Tue Apr 3 11:59:04 2018 +0200 drm/virtio: fix vq wait_event condition commit d02d270014f70dcab0117776b81a37b6fca745ae upstream. Wait until we have enough space in the virt queue to actually queue up our request. Avoids the guest spinning in case we have a non-zero amount of free entries but not enough for the request. Cc: stable@vger.kernel.org Reported-by: Alain Magloire Signed-off-by: Gerd Hoffmann Reviewed-by: Dave Airlie Link: http://patchwork.freedesktop.org/patch/msgid/20180403095904.11152-1-kraxel@redhat.com Signed-off-by: Sean Paul Signed-off-by: Greg Kroah-Hartman commit e0138cdf4b3f0bbd0049879aa1d2cae9258a37d2 Author: Michael S. Tsirkin Date: Fri Apr 20 21:00:13 2018 +0300 virtio_console: reset on out of memory commit 5c60300d68da32ca77f7f978039dc72bfc78b06b upstream. When out of memory and we can't add ctrl vq buffers, probe fails. Unfortunately the error handling is out of spec: it calls del_vqs without bothering to reset the device first. To fix, call the full cleanup function in this case. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 912301ab17b016665fa85936ac4c47674693e52d Author: Michael S. Tsirkin Date: Fri Apr 20 20:51:18 2018 +0300 virtio_console: move removal code commit aa44ec867030a72e8aa127977e37dec551d8df19 upstream. Will make it reusable for error handling. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit b83f9c836ae1e2a5f0a391a21dbc439534e46705 Author: Michael S. Tsirkin Date: Fri Apr 20 20:49:04 2018 +0300 virtio_console: drop custom control queue cleanup commit 61a8950c5c5708cf2068b29ffde94e454e528208 upstream. We now cleanup all VQs on device removal - no need to handle the control VQ specially. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 9037306163a6ba5587e4b5ca511ac7be4fb7295b Author: Michael S. Tsirkin Date: Fri Apr 20 20:24:23 2018 +0300 virtio_console: free buffers after reset commit a7a69ec0d8e4a58be7db88d33cbfa2912807bb2b upstream. Console driver is out of spec. The spec says: A driver MUST NOT decrement the available idx on a live virtqueue (ie. there is no way to “unexpose” buffers). and it does exactly that by trying to detach unused buffers without doing a device reset first. Defer detaching the buffers until device unplug. Of course this means we might get an interrupt for a vq without an attached port now. Handle that by discarding the consumed buffer. Reported-by: Tiwei Bie Fixes: b3258ff1d6 ("virtio: Decrement avail idx on buffer detach") Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 2d0c1868ea023b0aeba73b613606327acc59989a Author: Michael S. Tsirkin Date: Fri Apr 20 19:54:23 2018 +0300 virtio_console: don't tie bufs to a vq commit 2855b33514d290c51d52d94e25d3ef942cd4d578 upstream. an allocated buffer doesn't need to be tied to a vq - only vq->vdev is ever used. Pass the function the just what it needs - the vdev. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 5a97e20bac3ba2d13e960e47863b3cd8bbef550f Author: Michael S. Tsirkin Date: Fri Apr 20 20:22:40 2018 +0300 virtio: add ability to iterate over vqs commit 24a7e4d20783c0514850f24a5c41ede46ab058f0 upstream. For cleanup it's helpful to be able to simply scan all vqs and discard all data. Add an iterator to do that. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 994806f02b3507bd5782318b6c2046ebcdd91bbd Author: Takashi Iwai Date: Tue Apr 24 11:11:48 2018 +0200 ALSA: usb-audio: Skip broken EU on Dell dock USB-audio commit 1d8d6428d1da642ddd75b0be2d1bb1123ff8e017 upstream. The Dell Dock USB-audio device with 0bda:4014 is behaving notoriously bad, and we have already applied some workaround to avoid the firmware hiccup. Yet we still need to skip one thing, the Extension Unit at ID 4, which doesn't react correctly to the mixer ctl access. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1090658 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a62f9c8aedb7a752fd05df98e8e0f0ea6b4b52fa Author: Ravi Chandra Sadineni Date: Fri Apr 20 11:08:21 2018 -0700 USB: Increment wakeup count on remote wakeup. commit 83a62c51ba7b3c0bf45150c4eac7aefc6c785e94 upstream. On chromebooks we depend on wakeup count to identify the wakeup source. But currently USB devices do not increment the wakeup count when they trigger the remote wake. This patch addresses the same. Resume condition is reported differently on USB 2.0 and USB 3.0 devices. On USB 2.0 devices, a wake capable device, if wake enabled, drives resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7). The upstream facing port then sets C_PORT_SUSPEND bit and reports a port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port has resumed before driving the resume signal from the host and C_PORT_SUSPEND is set, then the device attached to the given port might be the reason for the last system wakeup. Increment the wakeup count for the same. On USB 3.0 devices, a function may signal that it wants to exit from device suspend by sending a Function Wake Device Notification to the host (USB3.0 spec section 8.5.6.4) Thus on receiving the Function Wake, increment the wakeup count. Signed-off-by: Ravi Chandra Sadineni Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman commit 66f48a57daf0901221764ae4cee9f86175a6eebe Author: Kamil Lulko Date: Thu Apr 19 16:54:02 2018 -0700 usb: core: Add quirk for HP v222w 16GB Mini commit 3180dabe08e3653bf0a838553905d88f3773f29c upstream. Add DELAY_INIT quirk to fix the following problem with HP v222w 16GB Mini: usb 1-3: unable to read config index 0 descriptor/start: -110 usb 1-3: can't read configurations, error -110 usb 1-3: can't set config #1, error -110 Signed-off-by: Kamil Lulko Signed-off-by: Kuppuswamy Sathyanarayanan Cc: stable Signed-off-by: Greg Kroah-Hartman commit 69ac6bf524e5fb5b4b3467ecc6066a5c8c70a8bf Author: Heikki Krogerus Date: Wed Apr 18 15:34:10 2018 +0300 usb: typec: ucsi: Increase command completion timeout value commit b1b59e16075f5e5da2943ce8de724ab96bc3c6c2 upstream. On some boards, under heavy load, the EC firmware is unable to complete commands even in one second. Increasing the command completion timeout value to five seconds. Reported-by: Quanxian Wang Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman commit 81e0c66a3ceef8f89fe31f4173d40ad40659e8ac Author: Marc Zyngier Date: Sun Apr 22 13:33:46 2018 +0100 serial: mvebu-uart: Fix local flags handling on termios update commit 46c6975a1fd9794ed979565235d24b2f5004e014 upstream. Commit 68a0db1d7da2 reworked the baud rate selection, but also added a (not so) subtle change in the way the local flags (c_lflag in the termios structure) are handled, forcing the new flags to always be the same as the old ones. The reason for that particular change is both obscure and undocumented. It also completely breaks userspace. Something as trivial as getty is unusable: Debian GNU/Linux 9 sy-borg ttyMV0 sy-borg login: root root [timeout] Debian GNU/Linux 9 sy-borg ttyMV0 which is quite obvious in retrospect: getty cannot get in control of the echo mode, is stuck in canonical mode, and times out without ever seeing anything valid. It also begs the question of how this change was ever tested. The fix is pretty obvious: stop messing with c_lflag, and the world will be a happier place. Cc: stable@vger.kernel.org # 4.15+ Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate") Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit a19a62e1a10120495f24f5e2118c524d7d262564 Author: Kyle Roeschley Date: Mon Apr 9 10:23:55 2018 -0500 USB: serial: cp210x: add ID for NI USB serial console commit 1e23aace21515a8f7615a1de016c0ea8d4e0cc6e upstream. Added the USB VID and PID for the USB serial console on some National Instruments devices. Signed-off-by: Kyle Roeschley Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit f061302e292ef6a109d97bb09935ceeeb0a3b263 Author: Vasyl Vavrychuk Date: Wed Apr 11 17:05:13 2018 +0300 USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster commit 470b5d6f0cf4674be2d1ec94e54283a1770b6a1a upstream. Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID (0x0403) and product ID (0x6010) as the "original" FTDI device. This patch avoids picking up by ftdi_sio of the first interface of this USB device. After that this device can be used by Arrow user-space JTAG driver. Signed-off-by: Vasyl Vavrychuk Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 6f49ac1a6433f113b1b68fe0be5aa4c1719129ce Author: Collin May Date: Sat Apr 7 14:32:48 2018 -0700 USB: serial: simple: add libtransistor console commit fe710508b6ba9d28730f3021fed70e7043433b2e upstream. Add simple driver for libtransistor USB console. This device is implemented in software: https://github.com/reswitched/libtransistor/blob/development/lib/usb_serial.c Signed-off-by: Collin May Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit ddac0e5e06dbdf99d7254fc6fa1820926d46f8f5 Author: Kai-Heng Feng Date: Fri Apr 20 16:52:50 2018 +0300 xhci: Fix USB ports for Dell Inspiron 5775 commit 621faf4f6a181b6e012c1d1865213f36f4159b7f upstream. The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 0f5bb9e007772deeab0635204a181845831dca9e Author: Zhengjun Xing Date: Fri Apr 13 15:55:34 2018 +0300 xhci: Fix Kernel oops in xhci dbgtty commit 7fc65d4c2ba9e5006c629669146c6876b65aa233 upstream. tty_unregister_driver may be called more than 1 time in some hotplug cases,it will cause the kernel oops. This patch checked dbc_tty_driver to make sure it is unregistered only 1 time. [ 175.741404] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 [ 175.742309] IP: tty_unregister_driver+0x9/0x70 [ 175.743148] PGD 0 P4D 0 [ 175.743981] Oops: 0000 [#1] SMP PTI [ 175.753904] RIP: 0010:tty_unregister_driver+0x9/0x70 [ 175.754817] RSP: 0018:ffffa8ff831d3bb0 EFLAGS: 00010246 [ 175.755753] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 175.756685] RDX: ffff92089c616000 RSI: ffffe64fe1b26080 RDI: 0000000000000000 [ 175.757608] RBP: ffff92086c988230 R08: 000000006c982701 R09: 00000001801e0016 [ 175.758533] R10: ffffa8ff831d3b48 R11: ffff92086c982100 R12: ffff92086c98827c [ 175.759462] R13: ffff92086c988398 R14: 0000000000000060 R15: ffff92089c5e9b40 [ 175.760401] FS: 0000000000000000(0000) GS:ffff9208a0100000(0000) knlGS:0000000000000000 [ 175.761334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 175.762270] CR2: 0000000000000034 CR3: 000000011800a003 CR4: 00000000003606e0 [ 175.763225] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 175.764164] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 175.765091] Call Trace: [ 175.766014] xhci_dbc_tty_unregister_driver+0x11/0x30 [ 175.766960] xhci_dbc_exit+0x2a/0x40 [ 175.767889] xhci_stop+0x57/0x1c0 [ 175.768824] usb_remove_hcd+0x100/0x250 [ 175.769708] usb_hcd_pci_remove+0x68/0x130 [ 175.770574] pci_device_remove+0x3b/0xc0 [ 175.771435] device_release_driver_internal+0x157/0x230 [ 175.772343] pci_stop_bus_device+0x74/0xa0 [ 175.773205] pci_stop_bus_device+0x2b/0xa0 [ 175.774061] pci_stop_bus_device+0x2b/0xa0 [ 175.774907] pci_stop_bus_device+0x2b/0xa0 [ 175.775741] pci_stop_bus_device+0x2b/0xa0 [ 175.776618] pci_stop_bus_device+0x2b/0xa0 [ 175.777452] pci_stop_bus_device+0x2b/0xa0 [ 175.778273] pci_stop_bus_device+0x2b/0xa0 [ 175.779092] pci_stop_bus_device+0x2b/0xa0 [ 175.779908] pci_stop_bus_device+0x2b/0xa0 [ 175.780750] pci_stop_bus_device+0x2b/0xa0 [ 175.781543] pci_stop_and_remove_bus_device+0xe/0x20 [ 175.782338] pciehp_unconfigure_device+0xb8/0x160 [ 175.783128] pciehp_disable_slot+0x4f/0xd0 [ 175.783920] pciehp_power_thread+0x82/0xa0 [ 175.784766] process_one_work+0x147/0x3c0 [ 175.785564] worker_thread+0x4a/0x440 [ 175.786376] kthread+0xf8/0x130 [ 175.787174] ? rescuer_thread+0x360/0x360 [ 175.787964] ? kthread_associate_blkcg+0x90/0x90 [ 175.788798] ret_from_fork+0x35/0x40 Cc: # 4.16 Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Zhengjun Xing Tested-by: Christian Kellner Reviewed-by: Christian Kellner Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman commit 6b9cd4e1b6333ac18530c2b366a97bff5d84b3e6 Author: Greg Kroah-Hartman Date: Sun Apr 22 14:31:03 2018 +0200 Revert "xhci: plat: Register shutdown for xhci_plat" commit c20f53c58261b121d0989e147368803b9773b413 upstream. This reverts commit b07c12517f2aed0add8ce18146bb426b14099392 It is incomplete and causes hangs on devices when shutting down. It needs a much more "complete" fix in order to work properly. As that fix has not been merged, revert this patch for now before it causes any more problems. Cc: Greg Hackmann Cc: Adam Wallis Cc: Mathias Nyman Cc: stable Signed-off-by: Greg Kroah-Hartman commit f6e286be23750962451d6e601bdfa78ac25bbc8a Author: Shuah Khan Date: Thu Apr 5 16:31:49 2018 -0600 usbip: vhci_hcd: check rhport before using in vhci_hub_control() commit 5b22f676118ff25049382041da0db8012e57c9e8 upstream. Validate !rhport < 0 before using it to access port_status array. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman commit a2a6baa59387b80759dd4f6cd26ea2fd7a1715f4 Author: Shuah Khan Date: Mon Apr 2 14:52:32 2018 -0600 usbip: vhci_hcd: Fix usb device and sockfd leaks commit 9020a7efe537856eb3e826ebebdf38a5d07a7857 upstream. vhci_hcd fails to do reset to put usb device and sockfd in the module remove/stop paths. Fix the leak. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman commit 567a6ddfdfa8835d5959d9d7cbf464cfbf233439 Author: Shuah Khan Date: Thu Apr 5 16:29:04 2018 -0600 usbip: usbip_host: fix to hold parent lock for device_attach() calls commit 4bfb141bc01312a817d36627cc47c93f801c216d upstream. usbip_host calls device_attach() without holding dev->parent lock. Fix it. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman commit 3151a856af74f3c9d3434014e46dca127c39619d Author: Shuah Khan Date: Thu Apr 5 16:29:50 2018 -0600 usbip: usbip_event: fix to not print kernel pointer address commit 4c982482341c64f55daf69b6caa5a2bcd9b43824 upstream. Fix it to not print kernel pointer address. Remove the conditional and debug message as it isn't very useful. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman commit ac3a1b364f29425d45cbb136d22d0c27752b77d8 Author: Theodore Ts'o Date: Wed Apr 25 01:12:32 2018 -0400 random: rate limit unseeded randomness warnings commit 4e00b339e264802851aff8e73cde7d24b57b18ce upstream. On systems without sufficient boot randomness, no point spamming dmesg. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 9e95539a39333b020500dc3a79183cc2728ace39 Author: Theodore Ts'o Date: Mon Apr 23 18:51:28 2018 -0400 random: fix possible sleeping allocation from irq context commit 6c1e851c4edc13a43adb3ea4044e3fc8f43ccf7d upstream. We can do a sleeping allocation from an irq context when CONFIG_NUMA is enabled. Fix this by initializing the NUMA crng instances in a workqueue. Reported-by: Tetsuo Handa Reported-by: syzbot+9de458f6a5e713ee8c1a@syzkaller.appspotmail.com Fixes: 8ef35c866f8862df ("random: set up the NUMA crng instances...") Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit a6f1748ee21ed2fe8239d68d64870710bebec655 Author: Theodore Ts'o Date: Wed Apr 11 15:23:56 2018 -0400 random: set up the NUMA crng instances after the CRNG is fully initialized commit 8ef35c866f8862df074a49a93b0309725812dea8 upstream. Until the primary_crng is fully initialized, don't initialize the NUMA crng nodes. Otherwise users of /dev/urandom on NUMA systems before the CRNG is fully initialized can get very bad quality randomness. Of course everyone should move to getrandom(2) where this won't be an issue, but there's a lot of legacy code out there. This related to CVE-2018-1108. Reported-by: Jann Horn Fixes: 1e7f583af67b ("random: make /dev/urandom scalable for silly...") Cc: stable@kernel.org # 4.8+ Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 26d9693d0ba462a6490f4e1aec3c9fd0a4f33ae3 Author: Lukas Czerner Date: Tue Apr 24 11:31:44 2018 -0400 ext4: fix bitmap position validation commit 22be37acce25d66ecf6403fc8f44df9c5ded2372 upstream. Currently in ext4_valid_block_bitmap() we expect the bitmap to be positioned anywhere between 0 and s_blocksize clusters, but that's wrong because the bitmap can be placed anywhere in the block group. This causes false positives when validating bitmaps on perfectly valid file system layouts. Fix it by checking whether the bitmap is within the group boundary. The problem can be reproduced using the following mkfs -t ext3 -E stride=256 /dev/vdb1 mount /dev/vdb1 /mnt/test cd /mnt/test wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.16.3.tar.xz tar xf linux-4.16.3.tar.xz This will result in the warnings in the logs EXT4-fs error (device vdb1): ext4_validate_block_bitmap:399: comm tar: bg 84: block 2774529: invalid block bitmap [ Changed slightly for clarity and to not drop a overflow test -- TYT ] Signed-off-by: Lukas Czerner Signed-off-by: Theodore Ts'o Reported-by: Ilya Dryomov Fixes: 7dac4a1726a9 ("ext4: add validity checks for bitmap block numbers") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 169c851575ece8ae4be7a36ee30caa01a43a1b0f Author: Theodore Ts'o Date: Mon Mar 26 23:54:10 2018 -0400 ext4: add validity checks for bitmap block numbers commit 7dac4a1726a9c64a517d595c40e95e2d0d135f6f upstream. An privileged attacker can cause a crash by mounting a crafted ext4 image which triggers a out-of-bounds read in the function ext4_valid_block_bitmap() in fs/ext4/balloc.c. This issue has been assigned CVE-2018-1093. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199181 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1560782 Reported-by: Wen Xu Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 3d1365860239209530501668b450d84b5ac6d420 Author: Theodore Ts'o Date: Thu Apr 26 00:44:46 2018 -0400 ext4: add MODULE_SOFTDEP to ensure crc32c is included in the initramfs commit 7ef79ad52136712172eb0525bf0b462516bf2f93 upstream. Fixes: a45403b51582 ("ext4: always initialize the crc32c checksum driver") Reported-by: François Valenduc Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 8762f8ee0a5ed4fc0c711f189dd273d75d7a4add Author: Theodore Ts'o Date: Wed Apr 18 11:49:31 2018 -0400 ext4: set h_journal if there is a failure starting a reserved handle commit b2569260d55228b617bd82aba6d0db2faeeb4116 upstream. If ext4 tries to start a reserved handle via jbd2_journal_start_reserved(), and the journal has been aborted, this can result in a NULL pointer dereference. This is because the fields h_journal and h_transaction in the handle structure share the same memory, via a union, so jbd2_journal_start_reserved() will clear h_journal before calling start_this_handle(). If this function fails due to an aborted handle, h_journal will still be NULL, and the call to jbd2_journal_free_reserved() will pass a NULL journal to sub_reserve_credits(). This can be reproduced by running "kvm-xfstests -c dioread_nolock generic/475". Cc: stable@kernel.org # 3.11 Fixes: 8f7d89f36829b ("jbd2: transaction reservation support") Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Reviewed-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 85b2cda099025c668025cb5a3521f060f241cd1f Author: Eric Biggers Date: Thu Apr 12 11:48:09 2018 -0400 ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS commit 349fa7d6e1935f49bf4161c4900711b2989180a9 upstream. During the "insert range" fallocate operation, extents starting at the range offset are shifted "right" (to a higher file offset) by the range length. But, as shown by syzbot, it's not validated that this doesn't cause extents to be shifted beyond EXT_MAX_BLOCKS. In that case ->ee_block can wrap around, corrupting the extent tree. Fix it by returning an error if the space between the end of the last extent and EXT4_MAX_BLOCKS is smaller than the range being inserted. This bug can be reproduced by running the following commands when the current directory is on an ext4 filesystem with a 4k block size: fallocate -l 8192 file fallocate --keep-size -o 0xfffffffe000 -l 4096 -n file fallocate --insert-range -l 8192 file Then after unmounting the filesystem, e2fsck reports corruption. Reported-by: syzbot+06c885be0edcdaeab40c@syzkaller.appspotmail.com Fixes: 331573febb6a ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman