commit dd785b09afa749d67034f599ddcb29014ce49c09 Author: Alexandre Frade Date: Sun Aug 25 18:09:46 2019 -0300 4.19.68-xanmod34 Signed-off-by: Alexandre Frade commit 095bd168b369d2bdab491f60af444a4a3b520bdb Merge: f836bb2ed15f def4c11b3131 Author: Alexandre Frade Date: Sun Aug 25 18:09:33 2019 -0300 Merge tag 'v4.19.68' into 4.19 This is the 4.19.68 stable release commit f836bb2ed15f54c8a2d6e19b4775640a04f915a6 Author: Alexandre Frade Date: Sun Aug 25 18:08:57 2019 -0300 sched/pds: remove pds cpu scheduler Signed-off-by: Alexandre Frade commit f340e0e2532abae8750cf5789863c603563cde86 Author: Alexandre Frade Date: Sun Aug 25 18:06:09 2019 -0300 Revert "pds: export can_nice symbol needed by android drivers" This reverts commit 90ee2baa7e30d5eb016c86135361325098b4ee7a. commit def4c11b31312777a8db1f1083e0d4bc6c9bbef0 Author: Greg Kroah-Hartman Date: Sun Aug 25 10:48:06 2019 +0200 Linux 4.19.68 commit 7c13983a2860294925ee5a1faa989f13cea8232e Author: Michal Simek Date: Mon Aug 6 10:43:10 2018 +0200 mmc: sdhci-of-arasan: Do now show error message in case of deffered probe commit 60208a267208c27fa3f23dfd36cbda180471fa98 upstream. When mmc-pwrseq property is passed mmc_pwrseq_alloc() can return -EPROBE_DEFER because driver for power sequence provider is not probed yet. Do not show error message when this situation happens. Signed-off-by: Michal Simek Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 447f5f48f4fad049e8f7d7c86ec45825af130ca8 Author: Maxim Mikityanskiy Date: Fri Jul 5 17:59:28 2019 +0300 net/mlx5e: Use flow keys dissector to parse packets for ARFS [ Upstream commit 405b93eb764367a670e729da18e54dc42db32620 ] The current ARFS code relies on certain fields to be set in the SKB (e.g. transport_header) and extracts IP addresses and ports by custom code that parses the packet. The necessary SKB fields, however, are not always set at that point, which leads to an out-of-bounds access. Use skb_flow_dissect_flow_keys() to get the necessary information reliably, fix the out-of-bounds access and reuse the code. Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit fbd8ab68067534a11976ba2031f531644669ee51 Author: Huy Nguyen Date: Thu Aug 1 11:10:19 2019 -0500 net/mlx5e: Only support tx/rx pause setting for port owner [ Upstream commit 466df6eb4a9e813b3cfc674363316450c57a89c5 ] Only support changing tx/rx pause frame setting if the net device is the vport group manager. Fixes: 3c2d18ef22df ("net/mlx5e: Support ethtool get/set_pauseparam") Signed-off-by: Huy Nguyen Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit b3410f0f850567cf1fa673b46a817928c8d9361f Author: Ross Lagerwall Date: Mon Aug 5 16:34:34 2019 +0100 xen/netback: Reset nr_frags before freeing skb [ Upstream commit 3a0233ddec554b886298de2428edb5c50a20e694 ] At this point nr_frags has been incremented but the frag does not yet have a page assigned so freeing the skb results in a crash. Reset nr_frags before freeing the skb to prevent this. Signed-off-by: Ross Lagerwall Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit cc4ff0f4f564a4e88bb88507b6b333eced41b4bb Author: Chris Packham Date: Mon Aug 12 08:18:25 2019 +1200 tipc: initialise addr_trail_end when setting node addresses [ Upstream commit 8874ecae2977e5a2d4f0ba301364435b81c05938 ] We set the field 'addr_trial_end' to 'jiffies', instead of the current value 0, at the moment the node address is initialized. This guarantees we don't inadvertently enter an address trial period when the node address is explicitly set by the user. Signed-off-by: Chris Packham Acked-by: Jon Maloy Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e89bb758c030150f6cf0a990011f109258b815dd Author: YueHaibing Date: Thu Aug 8 14:22:47 2019 +0800 team: Add vlan tx offload to hw_enc_features [ Upstream commit 227f2f030e28d8783c3d10ce70ff4ba79cad653f ] We should also enable team's vlan tx offload in hw_enc_features, pass the vlan packets to the slave devices with vlan tci, let the slave handle vlan tunneling offload implementation. Fixes: 3268e5cb494d ("team: Advertise tunneling offload features") Signed-off-by: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit eeb148d20819b94d22990a162f751f4df12a660b Author: Xin Long Date: Mon Aug 12 20:49:12 2019 +0800 sctp: fix the transport error_count check [ Upstream commit a1794de8b92ea6bc2037f445b296814ac826693e ] As the annotation says in sctp_do_8_2_transport_strike(): "If the transport error count is greater than the pf_retrans threshold, and less than pathmaxrtx ..." It should be transport->error_count checked with pathmaxrxt, instead of asoc->pf_retrans. Fixes: 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 227f204ad1974866bb79b29a94e8b9ee9491793a Author: zhengbin Date: Tue Aug 13 22:05:50 2019 +0800 sctp: fix memleak in sctp_send_reset_streams [ Upstream commit 6d5afe20397b478192ed8c38ec0ee10fa3aec649 ] If the stream outq is not empty, need to kfree nstr_list. Fixes: d570a59c5b5f ("sctp: only allow the out stream reset when the stream outq is empty") Reported-by: Hulk Robot Signed-off-by: zhengbin Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 154e6bc497c9c4dd4c8ce41a10615dbe474135cf Author: Eric Dumazet Date: Wed Aug 14 02:11:57 2019 -0700 net/packet: fix race in tpacket_snd() [ Upstream commit 32d3182cd2cd29b2e7e04df7b0db350fbe11289f ] packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f588dccfc13714bed02c036dde2daf16e625b499 Author: Wenwen Wang Date: Mon Aug 12 14:11:35 2019 -0500 net/mlx4_en: fix a memory leak bug [ Upstream commit 48ec7014c56e5eb2fbf6f479896143622d834f3b ] In mlx4_en_config_rss_steer(), 'rss_map->indir_qp' is allocated through kzalloc(). After that, mlx4_qp_alloc() is invoked to configure RSS indirection. However, if mlx4_qp_alloc() fails, the allocated 'rss_map->indir_qp' is not deallocated, leading to a memory leak bug. To fix the above issue, add the 'qp_alloc_err' label to free 'rss_map->indir_qp'. Fixes: 4931c6ef04b4 ("net/mlx4_en: Optimized single ring steering") Signed-off-by: Wenwen Wang Reviewed-by: Tariq Toukan Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 8905a249448cc80e9932a2f013f4954846d9f45a Author: Chen-Yu Tsai Date: Sun Aug 11 22:18:25 2019 +0800 net: dsa: Check existence of .port_mdb_add callback before calling it [ Upstream commit 58799865be84e2a895dab72de0e1b996ed943f22 ] The dsa framework has optional .port_mdb_{prepare,add,del} callback fields for drivers to handle multicast database entries. When adding an entry, the framework goes through a prepare phase, then a commit phase. Drivers not providing these callbacks should be detected in the prepare phase. DSA core may still bypass the bridge layer and call the dsa_port_mdb_add function directly with no prepare phase or no switchdev trans object, and the framework ends up calling an undefined .port_mdb_add callback. This results in a NULL pointer dereference, as shown in the log below. The other functions seem to be properly guarded. Do the same for .port_mdb_add in dsa_switch_mdb_add_bitmap() as well. 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] SMP ARM Modules linked in: rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 CPU: 1 PID: 134 Comm: kworker/1:2 Not tainted 5.3.0-rc1-00247-gd3519030752a #1 Hardware name: Allwinner sun7i (A20) Family Workqueue: events switchdev_deferred_process_work PC is at 0x0 LR is at dsa_switch_event+0x570/0x620 pc : [<00000000>] lr : [] psr: 80070013 sp : ee871db8 ip : 00000000 fp : ee98d0a4 r10: 0000000c r9 : 00000008 r8 : ee89f710 r7 : ee98d040 r6 : ee98d088 r5 : c0f04c48 r4 : ee98d04c r3 : 00000000 r2 : ee89f710 r1 : 00000008 r0 : ee98d040 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6deb406a DAC: 00000051 Process kworker/1:2 (pid: 134, stack limit = 0x(ptrval)) Stack: (0xee871db8 to 0xee872000) 1da0: ee871e14 103ace2d 1dc0: 00000000 ffffffff 00000000 ee871e14 00000005 00000000 c08524a0 00000000 1de0: ffffe000 c014bdfc c0f04c48 ee871e98 c0f04c48 ee9e5000 c0851120 c014bef0 1e00: 00000000 b643aea2 ee9b4068 c08509a8 ee2bf940 ee89f710 ee871ecb 00000000 1e20: 00000008 103ace2d 00000000 c087e248 ee29c868 103ace2d 00000001 ffffffff 1e40: 00000000 ee871e98 00000006 00000000 c0fb2a50 c087e2d0 ffffffff c08523c4 1e60: ffffffff c014bdfc 00000006 c0fad2d0 ee871e98 ee89f710 00000000 c014c500 1e80: 00000000 ee89f3c0 c0f04c48 00000000 ee9e5000 c087dfb4 ee9e5000 00000000 1ea0: ee89f710 ee871ecb 00000001 103ace2d 00000000 c0f04c48 00000000 c087e0a8 1ec0: 00000000 efd9a3e0 0089f3c0 103ace2d ee89f700 ee89f710 ee9e5000 00000122 1ee0: 00000100 c087e130 ee89f700 c0fad2c8 c1003ef0 c087de4c 2e928000 c0fad2ec 1f00: c0fad2ec ee839580 ef7a62c0 ef7a9400 00000000 c087def8 c0fad2ec c01447dc 1f20: ef315640 ef7a62c0 00000008 ee839580 ee839594 ef7a62c0 00000008 c0f03d00 1f40: ef7a62d8 ef7a62c0 ffffe000 c0145b84 ffffe000 c0fb2420 c0bfaa8c 00000000 1f60: ffffe000 ee84b600 ee84b5c0 00000000 ee870000 ee839580 c0145b40 ef0e5ea4 1f80: ee84b61c c014a6f8 00000001 ee84b5c0 c014a5b0 00000000 00000000 00000000 1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [] (dsa_switch_event) from [] (notifier_call_chain+0x48/0x84) [] (notifier_call_chain) from [] (raw_notifier_call_chain+0x18/0x20) [] (raw_notifier_call_chain) from [] (dsa_port_mdb_add+0x48/0x74) [] (dsa_port_mdb_add) from [] (__switchdev_handle_port_obj_add+0x54/0xd4) [] (__switchdev_handle_port_obj_add) from [] (switchdev_handle_port_obj_add+0x8/0x14) [] (switchdev_handle_port_obj_add) from [] (dsa_slave_switchdev_blocking_event+0x94/0xa4) [] (dsa_slave_switchdev_blocking_event) from [] (notifier_call_chain+0x48/0x84) [] (notifier_call_chain) from [] (blocking_notifier_call_chain+0x50/0x68) [] (blocking_notifier_call_chain) from [] (switchdev_port_obj_notify+0x44/0xa8) [] (switchdev_port_obj_notify) from [] (switchdev_port_obj_add_now+0x90/0x104) [] (switchdev_port_obj_add_now) from [] (switchdev_port_obj_add_deferred+0x14/0x5c) [] (switchdev_port_obj_add_deferred) from [] (switchdev_deferred_process+0x64/0x104) [] (switchdev_deferred_process) from [] (switchdev_deferred_process_work+0xc/0x14) [] (switchdev_deferred_process_work) from [] (process_one_work+0x218/0x50c) [] (process_one_work) from [] (worker_thread+0x44/0x5bc) [] (worker_thread) from [] (kthread+0x148/0x150) [] (kthread) from [] (ret_from_fork+0x14/0x2c) Exception stack(0xee871fb0 to 0xee871ff8) 1fa0: 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: bad PC value ---[ end trace 1292c61abd17b130 ]--- [] (dsa_switch_event) from [] (notifier_call_chain+0x48/0x84) corresponds to $ arm-linux-gnueabihf-addr2line -C -i -e vmlinux c08533ec linux/net/dsa/switch.c:156 linux/net/dsa/switch.c:178 linux/net/dsa/switch.c:328 Fixes: e6db98db8a95 ("net: dsa: add switch mdb bitmap functions") Signed-off-by: Chen-Yu Tsai Reviewed-by: Vivien Didelot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit d61d8ea9ca1296fcdf1ed2eb979a18c09bce5581 Author: YueHaibing Date: Wed Aug 7 10:19:59 2019 +0800 bonding: Add vlan tx offload to hw_enc_features [ Upstream commit d595b03de2cb0bdf9bcdf35ff27840cc3a37158f ] As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload") said, we should always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Now if encapsulation protocols like VXLAN is used, skb->encapsulation may be set, then the packet is passed to vlan device which based on bonding device. However in netif_skb_features(), the check of hw_enc_features: if (skb->encapsulation) features &= dev->hw_enc_features; clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results in same issue in commit 30d8177e8ac7 like this: vlan_dev_hard_start_xmit -->dev_queue_xmit -->validate_xmit_skb -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared -->validate_xmit_vlan -->__vlan_hwaccel_push_inside //skb->tci is cleared ... --> bond_start_xmit --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34 --> __skb_flow_dissect // nhoff point to IP header --> case htons(ETH_P_8021Q) // skb_vlan_tag_present is false, so vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), //vlan point to ip header wrongly Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features") Signed-off-by: YueHaibing Acked-by: Jay Vosburgh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 40933af400c5e0e37fe475111d7d9fcc815f27de Author: Manish Chopra Date: Sun Aug 18 07:25:48 2019 -0700 bnx2x: Fix VF's VLAN reconfiguration in reload. [ Upstream commit 4a4d2d372fb9b9229327e2ed01d5d9572eddf4de ] Commit 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence."), introduced a regression in driver that as a part of VF's reload flow, VLANs created on the VF doesn't get re-configured in hardware as vlan metadata/info was not getting cleared for the VFs which causes vlan PING to stop. This patch clears the vlan metadata/info so that VLANs gets re-configured back in the hardware in VF's reload flow and PING/traffic continues for VLANs created over the VFs. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Manish Chopra Signed-off-by: Sudarsana Kalluru Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 03d54393e3d7d78c72742353026505766c93eac1 Author: Joerg Roedel Date: Fri Oct 5 12:32:46 2018 +0200 iommu/amd: Move iommu_init_pci() to .init section commit 24d2c521749d8547765b555b7a85cca179bb2275 upstream. The function is only called from another __init function, so it should be moved to .init too. Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman commit 62e023ddd01a56d9f1bf0dcd3c878fd7f2326c25 Author: YueHaibing Date: Tue Jul 16 20:17:20 2019 +0200 Input: psmouse - fix build error of multiple definition commit 49e6979e7e92cf496105b5636f1df0ac17c159c0 upstream. trackpoint_detect() should be static inline while CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails: drivers/input/mouse/alps.o: In function `trackpoint_detect': alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect' drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here Reported-by: Hulk Robot Fixes: 55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions") Signed-off-by: YueHaibing Signed-off-by: Dmitry Torokhov Cc: Hui Wang Signed-off-by: Greg Kroah-Hartman commit 28ff7d3b3fda978eff04151989c4043b1ead7a38 Author: Dirk Morris Date: Thu Aug 8 13:57:51 2019 -0700 netfilter: conntrack: Use consistent ct id hash calculation commit 656c8e9cc1badbc18eefe6ba01d33ebbcae61b9a upstream. Change ct id hash calculation to only use invariants. Currently the ct id hash calculation is based on some fields that can change in the lifetime on a conntrack entry in some corner cases. The current hash uses the whole tuple which contains an hlist pointer which will change when the conntrack is placed on the dying list resulting in a ct id change. This patch also removes the reply-side tuple and extension pointer from the hash calculation so that the ct id will will not change from initialization until confirmation. Fixes: 3c79107631db1f7 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id") Signed-off-by: Dirk Morris Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 30b9da0ec2a2f93b2f78ee54732185ce30c19df3 Author: Will Deacon Date: Fri Aug 16 14:57:43 2019 +0100 arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side commit b6143d10d23ebb4a77af311e8b8b7f019d0163e6 upstream. The initial support for dynamic ftrace trampolines in modules made use of an indirect branch which loaded its target from the beginning of a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far branches to dynamic ftrace")). Since no instructions were being patched, no cache maintenance was needed. However, later in be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") this code was reworked to output the trampoline instructions directly into the PLT entry but, unfortunately, the necessary cache maintenance was overlooked. Add a call to __flush_icache_range() after writing the new trampoline instructions but before patching in the branch to the trampoline. Cc: Ard Biesheuvel Cc: James Morse Cc: Fixes: be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code") Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman commit a1cd2f7015bdcd22652937ca1936814658647e6d Author: Mike Snitzer Date: Wed Apr 3 12:23:11 2019 -0400 dm: disable DISCARD if the underlying storage no longer supports it commit bcb44433bba5eaff293888ef22ffa07f1f0347d6 upstream. Storage devices which report supporting discard commands like WRITE_SAME_16 with unmap, but reject discard commands sent to the storage device. This is a clear storage firmware bug but it doesn't change the fact that should a program cause discards to be sent to a multipath device layered on this buggy storage, all paths can end up failed at the same time from the discards, causing possible I/O loss. The first discard to a path will fail with Illegal Request, Invalid field in cdb, e.g.: kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current] kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00 kernel: blk_update_request: critical target error, dev sdfn, sector 10487808 The SCSI layer converts this to the BLK_STS_TARGET error number, the sd device disables its support for discard on this path, and because of the BLK_STS_TARGET error multipath fails the discard without failing any path or retrying down a different path. But subsequent discards can cause path failures. Any discards sent to the path which already failed a discard ends up failing with EIO from blk_cloned_rq_check_limits with an "over max size limit" error since the discard limit was set to 0 by the sd driver for the path. As the error is EIO, this now fails the path and multipath tries to send the discard down the next path. This cycle continues as discards are sent until all paths fail. Fix this by training DM core to disable DISCARD if the underlying storage already did so. Also, fix branching in dm_done() and clone_endio() to reflect the mutually exclussive nature of the IO operations in question. Cc: stable@vger.kernel.org Reported-by: David Jeffery Signed-off-by: Mike Snitzer [Salvatore Bonaccorso: backported to 4.19: Adjust for context changes in drivers/md/dm-core.h] Signed-off-by: Salvatore Bonaccorso Signed-off-by: Greg Kroah-Hartman commit 4af28b2f19b0a3343b39cc4c86067965ee34a249 Author: Rodrigo Vivi Date: Fri Aug 3 16:27:21 2018 -0700 drm/i915/cfl: Add a new CFL PCI ID. commit d0e062ebb3a44b56a7e672da568334c76f763552 upstream. One more CFL ID added to spec. Cc: José Roberto de Souza Signed-off-by: Rodrigo Vivi Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20180803232721.20038-1-rodrigo.vivi@intel.com Signed-off-by: Wan Yusof, Wan Fahim AsqalaniX Signed-off-by: Greg Kroah-Hartman commit 3ca5b7b4afeef6be791f998c1b43109489e603c6 Author: Tony Lindgren Date: Thu Aug 15 01:26:02 2019 -0700 USB: serial: option: Add Motorola modem UARTs commit 6caf0be40a707689e8ff8824fdb96ef77685b1ba upstream. On Motorola Mapphone devices such as Droid 4 there are five USB ports that do not use the same layout as Gobi 1K/2K/etc devices listed in qcserial.c. So we should use qcaux.c or option.c as noted by Dan Williams . As the Motorola USB serial ports have an interrupt endpoint as shown with lsusb -v, we should use option.c instead of qcaux.c as pointed out by Johan Hovold . The ff/ff/ff interfaces seem to always be UARTs on Motorola devices. For the other interfaces, class 0x0a (CDC Data) should not in general be added as they are typically part of a multi-interface function as noted earlier by Bjørn Mork . However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a class is only used for flashing the modem firmware, and there are no other interfaces. So I've added that too with more details below as it works just fine. The ttyUSB ports on Droid 4 are: ttyUSB0 DIAG, CQDM-capable ttyUSB1 MUX or NMEA, no response ttyUSB2 MUX or NMEA, no response ttyUSB3 TCMD ttyUSB4 AT-capable The ttyUSB0 is detected as QCDM capable by ModemManager. I think it's only used for debugging with ModemManager --debug for sending custom AT commands though. ModemManager already can manage data connection using the USB QMI ports that are already handled by the qmi_wwan.c driver. To enable the MUX or NMEA ports, it seems that something needs to be done additionally to enable them, maybe via the DIAG or TCMD port. It might be just a NVRAM setting somewhere, but I have no idea what NVRAM settings may need changing for that. The TCMD port seems to be a Motorola custom protocol for testing the modem and to configure it's NVRAM and seems to work just fine based on a quick test with a minimal tcmdrw tool I wrote. The voice modem AT-capable port seems to provide only partial support, and no PM support compared to the TS 27.010 based UART wired directly to the modem. The UARTs added with this change are the same product IDs as the Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't have any mdm9600 based devices, so I have only tested these on mdm6600 based droid 4. Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android Linux kernel driver moto_flashqsc.c just seems to change the port->bulk_out_size to 8K from the default. And is only used for flashing the modem firmware it seems. I've verified that flashing the modem with signed firmware works just fine with the option driver after manually toggling the GPIO pins, so I've added droid 4 modem flashing mode to the option driver. I've not added the other devices listed in moto_flashqsc.c in case they really need different port->bulk_out_size. Those can be added as they get tested to work for flashing the modem. After this patch the output of /sys/kernel/debug/usb/devices has the following for normal 22b8:2a70 mode including the related qmi_wwan interfaces: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=2a70 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms In 22b8:900e "qc_dload" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=900e Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms And in 22b8:4281 "ram_downloader" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=4281 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Cc: Bjørn Mork Cc: Dan Williams Cc: Lars Melin Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Tested-by: Pavel Machek Signed-off-by: Tony Lindgren Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e480d6cf6f79122459f1348d6af3dee654ce3c6e Author: Bob Ham Date: Wed Jul 24 07:52:26 2019 -0700 USB: serial: option: add the BroadMobi BM818 card commit e5d8badf37e6b547842f2fcde10361b29e08bd36 upstream. Add a VID:PID for the BroadMobi BM818 M.2 card T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2060 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Bob Ham Signed-off-by: Angus Ainslie (Purism) Cc: stable [ johan: use USB_DEVICE_INTERFACE_CLASS() ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 8175fa2987a66363f39100362291192101165a2f Author: Yoshiaki Okamoto Date: Sat Jul 20 22:23:18 2019 +0900 USB: serial: option: Add support for ZTE MF871A commit 7e7ae38bf928c5cfa6dd6e9a2cf8b42c84a27c92 upstream. This patch adds support for MF871A USB modem (aka Speed USB STICK U03) to option driver. This modem is manufactured by ZTE corporation, and sold by KDDI. Interface layout: 0: AT 1: MODEM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1481 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=1234567890ABCDEF C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Co-developed-by: Hiroyuki Yamamoto Signed-off-by: Hiroyuki Yamamoto Signed-off-by: Yoshiaki Okamoto Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit afb677b299950b8749079df0c432b70dc951ba88 Author: Rogan Dawes Date: Wed Jul 17 11:11:34 2019 +0200 USB: serial: option: add D-Link DWM-222 device ID commit 552573e42aab5f75aff9bab855a9677979d9a7d5 upstream. Add device id for D-Link DWM-222 A2. MI_00 D-Link HS-USB Diagnostics MI_01 D-Link HS-USB Modem MI_02 D-Link HS-USB AT Port MI_03 D-Link HS-USB NMEA MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan) MI_05 USB Mass Storage Device Cc: stable@vger.kernel.org Signed-off-by: Rogan Dawes Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 487d66ae8f4531cd7a9ed96b370f238fcb0d3021 Author: Oliver Neukum Date: Tue Aug 13 11:35:41 2019 +0200 USB: CDC: fix sanity checks in CDC union parser commit 54364278fb3cabdea51d6398b07c87415065b3fc upstream. A few checks checked for the size of the pointer to a structure instead of the structure itself. Copy & paste issue presumably. Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core") Cc: stable Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit c02c0249ce5523a7a264136ed36f857b85555bac Author: Oliver Neukum Date: Thu Aug 8 16:21:19 2019 +0200 usb: cdc-acm: make sure a refcount is taken early enough commit c52873e5a1ef72f845526d9f6a50704433f9c625 upstream. destroy() will decrement the refcount on the interface, so that it needs to be taken so early that it never undercounts. Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Cc: stable Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit f417f9715f4c745bdf94ad81c731cabc3a795692 Author: Yoshihiro Shimoda Date: Wed Jul 31 19:15:43 2019 +0900 usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role" commit 5dac665cf403967bb79a7aeb8c182a621fe617ff upstream. Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Fixes: cc995c9ec118 ("usb: gadget: udc: renesas_usb3: add support for usb role swap") Cc: # v4.12+ Reviewed-by: Geert Uytterhoeven Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 7f52d6d2a82df15d7ea01d69d0943d2abc201b43 Author: Alan Stern Date: Mon Aug 12 16:11:07 2019 -0400 USB: core: Fix races in character device registration and deregistraion commit 303911cfc5b95d33687d9046133ff184cf5043ff upstream. The syzbot fuzzer has found two (!) races in the USB character device registration and deregistration routines. This patch fixes the races. The first race results from the fact that usb_deregister_dev() sets usb_minors[intf->minor] to NULL before calling device_destroy() on the class device. This leaves a window during which another thread can allocate the same minor number but will encounter a duplicate name error when it tries to register its own class device. A typical error message in the system log would look like: sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0' The patch fixes this race by destroying the class device first. The second race is in usb_register_dev(). When that routine runs, it first allocates a minor number, then drops minor_rwsem, and then creates the class device. If the device creation fails, the minor number is deallocated and the whole routine returns an error. But during the time while minor_rwsem was dropped, there is a window in which the minor number is allocated and so another thread can successfully open the device file. Typically this results in use-after-free errors or invalid accesses when the other thread closes its open file reference, because the kernel then tries to release resources that were already deallocated when usb_register_dev() failed. The patch fixes this race by keeping minor_rwsem locked throughout the entire routine. Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman commit 367d103a4a937cfdb2fbccdb860099cdb8487180 Author: Jacopo Mondi Date: Mon Aug 5 17:55:15 2019 +0200 iio: adc: max9611: Fix temperature reading in probe commit b9ddd5091160793ee9fac10da765cf3f53d2aaf0 upstream. The max9611 driver reads the die temperature at probe time to validate the communication channel. Use the actual read value to perform the test instead of the read function return value, which was mistakenly used so far. The temperature reading test was only successful because the 0 return value is in the range of supported temperatures. Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Signed-off-by: Jacopo Mondi Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit dac96992f00aedbf988cb91da3b12cb07b6632d8 Author: Ian Abbott Date: Mon Aug 12 13:08:14 2019 +0100 staging: comedi: dt3000: Fix rounding up of timer divisor commit 8e2a589a3fc36ce858d42e767c3bcd8fc62a512b upstream. `dt3k_ns_to_timer()` determines the prescaler and divisor to use to produce a desired timing period. It is influenced by a rounding mode and can round the divisor up, down, or to the nearest value. However, the code for rounding up currently does the same as rounding down! Fix ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when rounding up. Also, change the types of the `divider`, `base` and `prescale` variables from `int` to `unsigned int` to avoid mixing signed and unsigned types in the calculations. Also fix a typo in a nearby comment: "improvment" => "improvement". Signed-off-by: Ian Abbott Cc: stable Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman commit 2e394bcfdcf35ee49a09b441b01c0b7a105ea72f Author: Ian Abbott Date: Mon Aug 12 12:15:17 2019 +0100 staging: comedi: dt3000: Fix signed integer overflow 'divider * base' commit b4d98bc3fc93ec3a58459948a2c0e0c9b501cd88 upstream. In `dt3k_ns_to_timer()` the following lines near the end of the function result in a signed integer overflow: prescale = 15; base = timer_base * (1 << prescale); divider = 65535; *nanosec = divider * base; (`divider`, `base` and `prescale` are type `int`, `timer_base` and `*nanosec` are type `unsigned int`. The value of `timer_base` will be either 50 or 100.) The main reason for the overflow is that the calculation for `base` is completely wrong. It should be: base = timer_base * (prescale + 1); which matches an earlier instance of this calculation in the same function. Reported-by: David Binderman Cc: Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman commit 8c7053d162d99d49fd929a1a7977acf704fa35a6 Author: Marc Zyngier Date: Fri Aug 2 10:28:32 2019 +0100 KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block commit 5eeaf10eec394b28fad2c58f1f5c3a5da0e87d1c upstream. Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit c8d95668c4caf845d2fa5e5a0c0df83cac00fc37 Author: Anders Roxell Date: Fri Jul 26 13:27:05 2019 +0200 arm64: KVM: regmap: Fix unexpected switch fall-through commit 3d584a3c85d6fe2cf878f220d4ad7145e7f89218 upstream. When fall-through warnings was enabled by default, commit d93512ef0f0e ("Makefile: Globally enable fall-through warning"), the following warnings was starting to show up: In file included from ../arch/arm64/include/asm/kvm_emulate.h:19, from ../arch/arm64/kvm/regmap.c:13: ../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’: ../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \ ^~~ ../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’ #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12) ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’ write_sysreg_el1(v, SYS_SPSR); ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:181:2: note: here case KVM_SPSR_ABT: ^~~~ In file included from ../arch/arm64/include/asm/cputype.h:132, from ../arch/arm64/include/asm/cache.h:8, from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:15, from ../include/asm-generic/bug.h:18, from ../arch/arm64/include/asm/bug.h:26, from ../include/linux/bug.h:5, from ../include/linux/mmdebug.h:5, from ../include/linux/mm.h:9, from ../arch/arm64/kvm/regmap.c:11: ../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile("msr " __stringify(r) ", %x0" \ ^~~ ../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’ write_sysreg(v, spsr_abt); ^~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:183:2: note: here case KVM_SPSR_UND: ^~~~ Rework to add a 'break;' in the swich-case since it didn't have that, leading to an interresting set of bugs. Cc: stable@vger.kernel.org # v4.17+ Fixes: a892819560c4 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers") Signed-off-by: Anders Roxell [maz: reworked commit message, fixed stable range] Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 0755b6b152cb4c677228089ca530e3834c708fcf Author: Qian Cai Date: Fri Aug 2 21:49:19 2019 -0700 asm-generic: fix -Wtype-limits compiler warnings [ Upstream commit cbedfe11347fe418621bd188d58a206beb676218 ] Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39c7ce ("bitops: Optimise get_order()") Signed-off-by: Qian Cai Reviewed-by: Nathan Chancellor Cc: David S. Miller Cc: Arnd Bergmann Cc: David Howells Cc: Jakub Jelinek Cc: Nick Desaulniers Cc: Bill Wendling Cc: James Y Knight Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 7113a1bc19fa1d5c2de1de98ad2076b7fc0a3b6d Author: YueHaibing Date: Fri Aug 2 21:48:40 2019 -0700 ocfs2: remove set but not used variable 'last_hash' [ Upstream commit 7bc36e3ce91471b6377c8eadc0a2f220a2280083 ] Fixes gcc '-Wunused-but-set-variable' warning: fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find: fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com Signed-off-by: YueHaibing Acked-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 01d8d08f4cd41eba7f3e594def8df97c56342c2c Author: Yang Shi Date: Fri Aug 2 21:48:37 2019 -0700 Revert "kmemleak: allow to coexist with fault injection" [ Upstream commit df9576def004d2cd5beedc00cb6e8901427634b9 ] When running ltp's oom test with kmemleak enabled, the below warning was triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is passed in: WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50 Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50 ... kmemleak_alloc+0x4e/0xb0 kmem_cache_alloc+0x2a7/0x3e0 mempool_alloc_slab+0x2d/0x40 mempool_alloc+0x118/0x2b0 bio_alloc_bioset+0x19d/0x350 get_swap_bio+0x80/0x230 __swap_writepage+0x5ff/0xb20 The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak has __GFP_NOFAIL set all the time due to d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection"). But, it doesn't make any sense to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same time. According to the discussion on the mailing list, the commit should be reverted for short term solution. Catalin Marinas would follow up with a better solution for longer term. The failure rate of kmemleak metadata allocation may increase in some circumstances, but this should be expected side effect. Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com Fixes: d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection") Signed-off-by: Yang Shi Suggested-by: Catalin Marinas Acked-by: Michal Hocko Cc: Dmitry Vyukov Cc: David Rientjes Cc: Matthew Wilcox Cc: Qian Cai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit cf9a18d7bcd067675afa3161836b2007893ea7a4 Author: Colin Ian King Date: Mon Jul 22 23:25:35 2019 +0100 drm/exynos: fix missing decrement of retry counter [ Upstream commit 1bbbab097a05276e312dd2462791d32b21ceb1ee ] Currently the retry counter is not being decremented, leading to a potential infinite spin if the scalar_reads don't change state. Addresses-Coverity: ("Infinite loop") Fixes: 280e54c9f614 ("drm/exynos: scaler: Reset hardware before starting the operation") Signed-off-by: Colin Ian King Signed-off-by: Inki Dae Signed-off-by: Sasha Levin commit c256729f269521508a517bc5255a116c189700be Author: Jeffrey Hugo Date: Wed Jun 26 11:00:15 2019 -0700 drm: msm: Fix add_gpu_components [ Upstream commit 9ca7ad6c7706edeae331c1632d0c63897418ebad ] add_gpu_components() adds found GPU nodes from the DT to the match list, regardless of the status of the nodes. This is a problem, because if the nodes are disabled, they should not be on the match list because they will not be matched. This prevents display from initing if a GPU node is defined, but it's status is disabled. Fix this by checking the node's status before adding it to the match list. Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding) Reviewed-by: Rob Clark Signed-off-by: Jeffrey Hugo Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com Signed-off-by: Sasha Levin commit b4f0fee7f77c258c315053941349e19498412a4b Author: Jack Morgenstein Date: Thu Aug 1 15:14:49 2019 +0300 IB/mad: Fix use-after-free in ib mad completion handling [ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ] We encountered a use-after-free bug when unloading the driver: [ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure: sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey; (the pd pointer in the above line is no longer valid, because the pd has been deallocated). We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close(). Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated. Note that freeing the CQ before deallocating the PD is the practice in the ULPs. Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin commit a0258ff4993f263c0943f6e6411e483c1a83c9e6 Author: Guy Levi Date: Wed Jul 31 11:19:29 2019 +0300 IB/mlx5: Fix MR registration flow to use UMR properly [ Upstream commit e5366d309a772fef264ec85e858f9ea46f939848 ] Driver shouldn't allow to use UMR to register a MR when umr_modify_atomic_disabled is set. Otherwise it will always end up with a failure in the post send flow which sets the UMR WQE to modify atomic access right. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Guy Levi Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin commit efb742ce4e27be7740157e0c83a74c2cbafa23d7 Author: Luck, Tony Date: Tue Jul 30 21:39:57 2019 -0700 IB/core: Add mitigation for Spectre V1 [ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ] Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index. Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin commit 4a0d2eeea27a868c7a3288fe96607580f27ed84e Author: Qian Cai Date: Wed Jul 31 16:05:45 2019 -0400 arm64/mm: fix variable 'pud' set but not used [ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ] GCC throws a warning, arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page': arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used [-Wunused-but-set-variable] pud_t pud; ^~~ because pud_table() is a macro and compiled away. Fix it by making it a static inline function and for pud_sect() as well. Signed-off-by: Qian Cai Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 6af9263f685d8ae3fc93ba8a19eb586e5d387b23 Author: Masami Hiramatsu Date: Thu Jul 25 17:16:05 2019 +0900 arm64: unwind: Prohibit probing on return_address() [ Upstream commit ee07b93e7721ccd5d5b9fa6f0c10cb3fe2f1f4f9 ] Prohibit probing on return_address() and subroutines which is called from return_address(), since the it is invoked from trace_hardirqs_off() which is also kprobe blacklisted. Reported-by: Naresh Kamboju Signed-off-by: Masami Hiramatsu Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit ffb1a76d1c29435e0c1e0ca16fd21bb37969ae60 Author: Qian Cai Date: Tue Jul 30 17:23:48 2019 -0400 arm64/efi: fix variable 'si' set but not used [ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ] GCC throws out this warning on arm64. drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry': drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si' set but not used [-Wunused-but-set-variable] Fix it by making free_screen_info() a static inline function. Acked-by: Will Deacon Signed-off-by: Qian Cai Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin commit 48522289bf50cdeab90ef2c5cc6e998c513e2a4c Author: Stephen Boyd Date: Tue Jul 30 09:48:03 2019 -0700 kbuild: Check for unknown options with cc-option usage in Kconfig and clang [ Upstream commit e8de12fb7cde2c85bc31097cd098da79a4818305 ] If the particular version of clang a user has doesn't enable -Werror=unknown-warning-option by default, even though it is the default[1], then make sure to pass the option to the Kconfig cc-option command so that testing options from Kconfig files works properly. Otherwise, depending on the default values setup in the clang toolchain we will silently assume options such as -Wmaybe-uninitialized are supported by clang, when they really aren't. A compilation issue only started happening for me once commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") was applied on top of commit b303c6df80c9 ("kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This leads kbuild to try and test for the existence of the -Wmaybe-uninitialized flag with the cc-option command in scripts/Kconfig.include, and it doesn't see an error returned from the option test so it sets the config value to Y. Then the Makefile tries to pass the unknown option on the command line and -Werror=unknown-warning-option catches the invalid option and breaks the build. Before commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") the build works fine, but any cc-option test of a warning option in Kconfig files silently evaluates to true, even if the warning option flag isn't supported on clang. Note: This doesn't change cc-option usages in Makefiles because those use a different rule that includes KBUILD_CFLAGS by default (see the __cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS variable already has the -Werror=unknown-warning-option flag set. Thanks to Doug for pointing out the different rule. [1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option Cc: Peter Smith Cc: Nick Desaulniers Cc: Douglas Anderson Signed-off-by: Stephen Boyd Reviewed-by: Nathan Chancellor Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit b3aebdd46d633d542badfb0d680eb491a001bf90 Author: Masahiro Yamada Date: Wed Jul 31 00:59:00 2019 +0900 kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules [ Upstream commit cb4819934a7f9b87876f11ed05b8624c0114551b ] KBUILD_EXTRA_SYMBOLS makes sense only when building external modules. Moreover, the modpost sets 'external_module' if the -e option is given. I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...) while I was here. Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 23bc01f0d95508be2407ebf65616d73a9dbfb381 Author: Miquel Raynal Date: Wed Jul 31 14:26:51 2019 +0200 ata: libahci: do not complain in case of deferred probe [ Upstream commit 090bb803708198e5ab6b0046398c7ed9f4d12d6b ] Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs") Reviewed-by: Hans de Goede Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 68340db992f6704b86a27e3f9f91d44ce1c8cb31 Author: Wang Xiayang Date: Sat Jul 27 17:30:30 2019 +0800 drm/amdgpu: fix a potential information leaking bug [ Upstream commit 929e571c04c285861e0bb049a396a2bdaea63282 ] Coccinelle reports a path that the array "data" is never initialized. The path skips the checks in the conditional branches when either of callback functions, read_wave_vgprs and read_wave_sgprs, is not registered. Later, the uninitialized "data" array is read in the while-loop below and passed to put_user(). Fix the path by allocating the array with kcalloc(). The patch is simplier than adding a fall-back branch that explicitly calls memset(data, 0, ...). Also it does not need the multiplication 1024*sizeof(*data) as the size parameter for memset() though there is no risk of integer overflow. Signed-off-by: Wang Xiayang Reviewed-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 02d4fe0193d569ecce9dfa9e45b10f98521df472 Author: Jia-Ju Bai Date: Mon Jul 29 16:44:51 2019 +0800 scsi: qla2xxx: Fix possible fcport null-pointer dereferences [ Upstream commit e82f04ec6ba91065fd33a6201ffd7cab840e1475 ] In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error handling code on line 4880: fcport = NULL; Then fcport is used on lines 4883-4886: INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn); INIT_WORK(&fcport->reg_work, qla_register_fcport_fn); INIT_LIST_HEAD(&fcport->gnl_entry); INIT_LIST_HEAD(&fcport->list); Thus, possible null-pointer dereferences may occur. To fix these bugs, qla2x00_alloc_fcport() directly returns NULL in the error handling code. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 3435e025ed71f4b3243e0c5209e2669d79ceff96 Author: Don Brace Date: Wed Jul 24 17:08:06 2019 -0500 scsi: hpsa: correct scsi command status issue after reset [ Upstream commit eeebce1862970653cdf5c01e98bc669edd8f529a ] Reviewed-by: Bader Ali - Saleh Reviewed-by: Scott Teel Reviewed-by: Scott Benesh Reviewed-by: Kevin Barnett Signed-off-by: Don Brace Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f833deae2a06bc33340da5769098490cb77dc8dc Author: Filipe Manana Date: Mon Jul 29 09:37:10 2019 +0100 Btrfs: fix deadlock between fiemap and transaction commits [ Upstream commit a6d155d2e363f26290ffd50591169cb96c2a609e ] The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 202aa96f052aa65d13a2e49f9c268ed124dbd648 Author: YueHaibing Date: Mon Jul 29 15:12:16 2019 +0800 drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m [ Upstream commit f4cc743a98136df3c3763050a0e8223b52d9a960 ] If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com Signed-off-by: Sasha Levin commit f69fd790edf709cfdfdfc912c2f6fd7e498d1fed Author: Kees Cook Date: Mon Jul 29 14:47:22 2019 -0700 libata: zpodd: Fix small read overflow in zpodd_get_mech_type() [ Upstream commit 71d6c505b4d9e6f76586350450e785e3d452b346 ] Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by: Jeffrin Jose T Fixes: afe759511808c ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/ Tested-by: Jeffrin Jose T Reviewed-by: Nick Desaulniers Signed-off-by: Kees Cook Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 0a19fff567a07ce808f2daa27c3d8e842e62766a Author: Numfor Mbiziwo-Tiapo Date: Wed Jul 24 16:44:58 2019 -0700 perf header: Fix use of unitialized value warning [ Upstream commit 20f9781f491360e7459c589705a2e4b1f136bee9 ] When building our local version of perf with MSAN (Memory Sanitizer) and running the perf record command, MSAN throws a use of uninitialized value warning in "tools/perf/util/util.c:333:6". This warning stems from the "buf" variable being passed into "write". It originated as the variable "ev" with the type union perf_event* defined in the "perf_event__synthesize_attr" function in "tools/perf/util/header.c". In the "perf_event__synthesize_attr" function they allocate space with a malloc call using ev, then go on to only assign some of the member variables before passing "ev" on as a parameter to the "process" function therefore "ev" contains uninitialized memory. Changing the malloc call to zalloc to initialize all the members of "ev" which gets rid of the warning. To reproduce this warning, build perf by running: make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\ -fsanitize-memory-track-origins" (Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang) then running: tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\ -i - --stdio Please see the cover letter for why false positive warnings may be generated. Signed-off-by: Numfor Mbiziwo-Tiapo Cc: Alexander Shishkin Cc: Ian Rogers Cc: Jiri Olsa Cc: Mark Drayton Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Song Liu Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit ab5aa579ca82741013274ea8df1e5caed76d067e Author: Vince Weaver Date: Tue Jul 23 11:06:01 2019 -0400 perf header: Fix divide by zero error if f_header.attr_size==0 [ Upstream commit 7622236ceb167aa3857395f9bdaf871442aa467e ] So I have been having lots of trouble with hand-crafted perf.data files causing segfaults and the like, so I have started fuzzing the perf tool. First issue found: If f_header.attr_size is 0 in the perf.data file, then perf will crash with a divide-by-zero error. Committer note: Added a pr_err() to tell the user why the command failed. Signed-off-by: Vince Weaver Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit a5e40452c916752c12127b53d3f3373c3d0af601 Author: Lucas Stach Date: Fri Jul 12 15:29:05 2019 +0200 irqchip/irq-imx-gpcv2: Forward irq type to parent [ Upstream commit 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ] The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't care about the IRQ type itself, but needs to forward the type to the parent IRQ controller, so this one can be configured correctly. Signed-off-by: Lucas Stach Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin commit dcb73180de61454eef0b6a1d8f8ce6de32b53f9e Author: Nianyao Tang Date: Fri Jul 26 17:32:57 2019 +0800 irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail [ Upstream commit 34f8eb92ca053cbba2887bb7e4dbf2b2cd6eb733 ] In its_vpe_init, when its_alloc_vpe_table fails, we should free vpt_page allocated just before, instead of vpe->vpt_page. Let's fix it. Cc: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Signed-off-by: Nianyao Tang Signed-off-by: Shaokun Zhang Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin commit e72e6ba17ab4c188023828644281ef9abdf98e92 Author: YueHaibing Date: Wed Jul 24 22:08:50 2019 +0800 xen/pciback: remove set but not used variable 'old_state' [ Upstream commit 09e088a4903bd0dd911b4f1732b250130cdaffed ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write: drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning: variable old_state set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by: Hulk Robot Signed-off-by: YueHaibing Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit ca5b26a8f1d8084970218ce97e3177be0c956cc9 Author: Geert Uytterhoeven Date: Thu Jul 11 15:03:59 2019 +0200 clk: renesas: cpg-mssr: Fix reset control race condition [ Upstream commit e1f1ae8002e4b06addc52443fcd975bbf554ae92 ] The module reset code in the Renesas CPG/MSSR driver uses read-modify-write (RMW) operations to write to a Software Reset Register (SRCRn), and simple writes to write to a Software Reset Clearing Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware User's Manuals. However, this may cause a race condition when two devices are reset in parallel: if the reset for device A completes in the middle of the RMW operation for device B, device A may be reset again, causing subtle failures (e.g. i2c timeouts): thread A thread B -------- -------- val = SRCRn val |= bit A SRCRn = val delay val = SRCRn (bit A is set) SRSTCLRn = bit A (bit A in SRCRn is cleared) val |= bit B SRCRn = val (bit A and B are set) This can be reproduced on e.g. Salvator-XS using: $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done & $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done & i2c-rcar e6510000.i2c: error -110 : 40000002 i2c-rcar e66d8000.i2c: error -110 : 40000002 According to the R-Car Gen3 Hardware Manual Errata for Rev. 0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware User's Manual, writes to SRCRn do not require read-modify-write cycles. Note that the R-Car Gen2 Hardware User's Manual has not been updated yet, and still says a read-modify-write sequence is required. According to the hardware team, the reset hardware block is the same on both R-Car Gen2 and Gen3, though. Hence fix the issue by replacing the read-modify-write operations on SRCRn by simple writes. Reported-by: Yao Lihua Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by: Geert Uytterhoeven Tested-by: Linh Phung Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit af2ed1a05a7a398a784589b125b7df587f5a6e79 Author: Chunyan Zhang Date: Thu Jul 18 13:36:16 2019 +0800 clk: sprd: Select REGMAP_MMIO to avoid compile errors [ Upstream commit c9a67cbb5189e966c70451562b2ca4c3876ab546 ] Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols. Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Chunyan Zhang Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 3e5f29b6667539006d9d746c540507ca1e638244 Author: Codrin Ciubotariu Date: Tue Jun 25 12:10:02 2019 +0300 clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1 [ Upstream commit 1573eebeaa8055777eb753f9b4d1cbe653380c38 ] In clk_generated_determine_rate(), if the divisor is greater than GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned. If clk_generated_set_rate() will be called later with this wrong rate, it will return -EINVAL, so the generated clock won't change its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1. Fixes: 8c7aa6328947 ("clk: at91: clk-generated: remove useless divisor loop") Signed-off-by: Codrin Ciubotariu Acked-by: Nicolas Ferre Acked-by: Ludovic Desroches Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 28fd9b37b6bb86c5d90694f4493c46b7d71cf9a6 Author: Vincent Chen Date: Wed Aug 14 16:23:53 2019 +0800 riscv: Make __fstate_clean() work correctly. commit 69703eb9a8ae28a46cd5bce7d69ceeef6273a104 upstream. Make the __fstate_clean() function correctly set the state of sstatus.FS in pt_regs to SR_FS_CLEAN. Fixes: 7db91e57a0acd ("RISC-V: Task implementation") Cc: linux-stable Signed-off-by: Vincent Chen Reviewed-by: Anup Patel Reviewed-by: Christoph Hellwig [paul.walmsley@sifive.com: expanded "Fixes" commit ID] Signed-off-by: Paul Walmsley Signed-off-by: Greg Kroah-Hartman commit cef0e9eb22315f7c5f3126eb5003e3ea0348ee93 Author: Florian Westphal Date: Mon Jul 29 17:58:10 2019 +0200 netfilter: ebtables: also count base chain policies commit 3b48300d5cc7c7bed63fddb006c4046549ed4aec upstream. ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 07d92caeb945093b25eaca3454263a0beca607b2 Author: Denis Kirjanov Date: Tue Jul 30 15:13:57 2019 +0200 net: usb: pegasus: fix improper read if get_registers() fail commit 224c04973db1125fcebefffd86115f99f50f8277 upstream. get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f13de3d677d1084485c0e4978d6e9f8b44f9972d Author: Oliver Neukum Date: Tue Aug 6 09:05:55 2019 -0700 Input: iforce - add sanity checks commit 849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c upstream. The endpoint type should also be checked before a device is accepted. Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 08b3af00a16188f3299ab6dc2c685947d61bd787 Author: Oliver Neukum Date: Thu Aug 1 09:44:25 2019 -0700 Input: kbtab - sanity check for endpoint type commit c88090dfc84254fa149174eb3e6a8458de1912c4 upstream. The driver should check whether the endpoint it uses has the correct type. Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit b545dc9debe69ca513b93f4a244451e9be14b0c5 Author: Hillf Danton Date: Tue Aug 6 16:40:15 2019 +0800 HID: hiddev: do cleanup in failure of opening a device commit 6d4472d7bec39917b54e4e80245784ea5d60ce49 upstream. Undo what we did for opening before releasing the memory slice. Reported-by: syzbot Cc: Andrey Konovalov Signed-off-by: Hillf Danton Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 0aab1a4653a6a21509e8add4bb460be76fcf9c70 Author: Hillf Danton Date: Tue Aug 6 16:38:58 2019 +0800 HID: hiddev: avoid opening a disconnected device commit 9c09b214f30e3c11f9b0b03f89442df03643794d upstream. syzbot found the following crash on: HEAD commit: e96407b4 usb-fuzzer: main usb gadget fuzzer driver git tree: https://github.com/google/kasan.git usb-fuzzer console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000 kernel config: https://syzkaller.appspot.com/x/.config?x=792eb47789f57810 dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e compiler: gcc (GCC) 9.0.0 20181231 (experimental) ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260 CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159 hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ef/0x2c50 kernel/exit.c:878 do_group_exit+0x125/0x340 kernel/exit.c:982 get_signal+0x466/0x23d0 kernel/signal.c:2728 do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078 RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c Allocated by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff8881cf591900 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 264 bytes inside of 512-byte region [ffff8881cf591900, ffff8881cf591b00) The buggy address belongs to the page: page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== In order to avoid opening a disconnected device, we need to check exist again after acquiring the existance lock, and bail out if necessary. Reported-by: syzbot Cc: Andrey Konovalov Signed-off-by: Hillf Danton Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 537d957b144f0531f67dc3962afd12b1b96cef4d Author: Oliver Neukum Date: Thu Jul 25 15:13:33 2019 +0200 HID: holtek: test for sanity of intfdata commit 01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 upstream. The ioctl handler uses the intfdata of a second interface, which may not be present in a broken or malicious device, hence the intfdata needs to be checked for NULL. [jkosina@suse.cz: fix newly added spurious space] Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 9585f4440cecaf1b1a513d1515adfb11d865bd03 Author: Hui Wang Date: Wed Aug 14 12:09:07 2019 +0800 ALSA: hda - Let all conexant codec enter D3 when rebooting commit 401714d9534aad8c24196b32600da683116bbe09 upstream. We have 3 new lenovo laptops which have conexant codec 0x14f11f86, these 3 laptops also have the noise issue when rebooting, after letting the codec enter D3 before rebooting or poweroff, the noise disappers. Instead of adding a new ID again in the reboot_notify(), let us make this function apply to all conexant codec. In theory make codec enter D3 before rebooting or poweroff is harmless, and I tested this change on a couple of other Lenovo laptops which have different conexant codecs, there is no side effect so far. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e58ba88d6c60fe10a1ec996c394c29a08f0cb2c8 Author: Hui Wang Date: Wed Aug 14 12:09:08 2019 +0800 ALSA: hda - Add a generic reboot_notify commit 871b9066027702e6e6589da0e1edd3b7dede7205 upstream. Make codec enter D3 before rebooting or poweroff can fix the noise issue on some laptops. And in theory it is harmless for all codecs to enter D3 before rebooting or poweroff, let us add a generic reboot_notify, then realtek and conexant drivers can call this function. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6c4a536ca97bc1bc7df5aa315dc6cad92c84d813 Author: Wenwen Wang Date: Fri Aug 9 23:29:48 2019 -0500 ALSA: hda - Fix a memory leak bug commit cfef67f016e4c00a2f423256fc678a6967a9fc09 upstream. In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc(). Then, the pin widgets in 'codec' are parsed. However, if the parsing process fails, 'spec' is not deallocated, leading to a memory leak. To fix the above issue, free 'spec' before returning the error. Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser") Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 1bf5f827564c34d034997635b06e2c0b66bedae4 Author: Takashi Iwai Date: Fri Aug 9 11:23:00 2019 +0200 ALSA: hda - Apply workaround for another AMD chip 1022:1487 commit de768ce45466f3009809719eb7b1f6f5277d9373 upstream. MSI MPG X570 board is with another AMD HD-audio controller (PCI ID 1022:1487) and it requires the same workaround applied for X370, etc (PCI ID 1022:1457). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 58b9f19ee438990f6406e61943d0bc7c875a0921 Author: Hui Peng Date: Tue Aug 13 22:34:04 2019 -0400 ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unit commit daac07156b330b18eb5071aec4b3ddca1c377f2c upstream. The `uac_mixer_unit_descriptor` shown as below is read from the device side. In `parse_audio_mixer_unit`, `baSourceID` field is accessed from index 0 to `bNrInPins` - 1, the current implementation assumes that descriptor is always valid (the length of descriptor is no shorter than 5 + `bNrInPins`). If a descriptor read from the device side is invalid, it may trigger out-of-bound memory access. ``` struct uac_mixer_unit_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDescriptorSubtype; __u8 bUnitID; __u8 bNrInPins; __u8 baSourceID[]; } ``` This patch fixes the bug by add a sanity check on the length of the descriptor. Reported-by: Hui Peng Reported-by: Mathias Payer Cc: Signed-off-by: Hui Peng Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 46f9a1bc60a4c15a14a6504168cee1c2e0bf3ab4 Author: Hui Peng Date: Thu Aug 15 00:31:34 2019 -0400 ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term commit 19bce474c45be69a284ecee660aa12d8f1e88f18 upstream. `check_input_term` recursively calls itself with input from device side (e.g., uac_input_terminal_descriptor.bCSourceID) as argument (id). In `check_input_term`, if `check_input_term` is called with the same `id` argument as the caller, it triggers endless recursive call, resulting kernel space stack overflow. This patch fixes the bug by adding a bitmap to `struct mixer_build` to keep track of the checked ids and stop the execution if some id has been checked (similar to how parse_audio_unit handles unitid argument). Reported-by: Hui Peng Reported-by: Mathias Payer Signed-off-by: Hui Peng Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit d5bb1240280526d644095e98e505e73de753371a Author: Takashi Iwai Date: Tue Aug 13 17:39:56 2019 +0200 ALSA: hda/realtek - Add quirk for HP Envy x360 commit 190d03814eb3b49d4f87ff38fef26d36f3568a60 upstream. HP Envy x360 (AMD Ryzen-based model) with 103c:8497 needs the same quirk like HP Spectre x360 for enabling the mute LED over Mic3 pin. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204373 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 61f6ecb758453d51f25c4cd991cfcc52c41e709a Author: Max Filippov Date: Mon Aug 12 15:01:30 2019 -0700 xtensa: add missing isync to the cpu_reset TLB code commit cd8869f4cb257f22b89495ca40f5281e58ba359c upstream. ITLB entry modifications must be followed by the isync instruction before the new entries are possibly used. cpu_reset lacks one isync between ITLB way 6 initialization and jump to the identity mapping. Add missing isync to xtensa cpu_reset. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov Signed-off-by: Greg Kroah-Hartman commit 7c001e5aab6dcf4883d67fe3154ce73725251f47 Author: Viresh Kumar Date: Wed Aug 7 12:36:01 2019 +0530 cpufreq: schedutil: Don't skip freq update when limits change commit 600f5badb78c316146d062cfd7af4a2cfb655baa upstream. To avoid reducing the frequency of a CPU prematurely, we skip reducing the frequency if the CPU had been busy recently. This should not be done when the limits of the policy are changed, for example due to thermal throttling. We should always get the frequency within the new limits as soon as possible. Trying to fix this by using only one flag, i.e. need_freq_update, can lead to a race condition where the flag gets cleared without forcing us to change the frequency at least once. And so this patch introduces another flag to avoid that race condition. Fixes: ecd288429126 ("cpufreq: schedutil: Don't set next_freq to UINT_MAX") Cc: v4.18+ # v4.18+ Reported-by: Doug Smythies Tested-by: Doug Smythies Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 7f68aa2e3e1bfa03a4e34e02d81718a4c19b47db Author: Fabrice Gasnier Date: Mon Oct 1 15:23:56 2018 +0200 Revert "pwm: Set class for exported channels in sysfs" commit c289d6625237aa785b484b4e94c23b3b91ea7e60 upstream. This reverts commit 7e5d1fd75c3dde9fc10c4472b9368089d1b81d00 ("pwm: Set class for exported channels in sysfs") as it causes regression with multiple pwm chip[1], when exporting a pwm channel (echo X > export): - ABI (Documentation/ABI/testing/sysfs-class-pwm) states pwmX should be created in /sys/class/pwm/pwmchipN/pwmX - Reverted patch causes new entry to be also created directly in /sys/class/pwm/pwmX - 1st time, exporting pwmX will create an entry in /sys/class/pwm/pwmX - class attributes are added under pwmX folder, such as export, unexport npwm, symlinks. This is wrong as it belongs to pwmchipN. It may cause bad behavior and report wrong values. - when another export happens on another pwmchip, it can't be created (e.g. -EEXIST). This is causing the issue with multiple pwmchip. Example on stm32 (stm32429i-eval) platform: $ ls /sys/class/pwm pwmchip0 pwmchip4 $ cd /sys/class/pwm/pwmchip0/ $ echo 0 > export $ ls /sys/class/pwm pwm0 pwmchip0 pwmchip4 $ cd /sys/class/pwm/pwmchip4/ $ echo 0 > export sysfs: cannot create duplicate filename '/class/pwm/pwm0' ...Exception stack follows... This is also seen on other platform [2] [1] https://lkml.org/lkml/2018/9/25/713 [2] https://lkml.org/lkml/2018/9/25/447 Signed-off-by: Fabrice Gasnier Tested-by: Gottfried Haider Tested-by: Michal Vokáč Signed-off-by: Thierry Reding Cc: John Keeping Signed-off-by: Greg Kroah-Hartman commit 056368fc3ef7e7425a7a0c1ba3d00d4c3462db1e Author: Isaac J. Manjarres Date: Tue Aug 13 15:37:37 2019 -0700 mm/usercopy: use memory range to be accessed for wraparound check commit 951531691c4bcaa59f56a316e018bc2ff1ddf855 upstream. Currently, when checking to see if accessing n bytes starting at address "ptr" will cause a wraparound in the memory addresses, the check in check_bogus_address() adds an extra byte, which is incorrect, as the range of addresses that will be accessed is [ptr, ptr + (n - 1)]. This can lead to incorrectly detecting a wraparound in the memory address, when trying to read 4 KB from memory that is mapped to the the last possible page in the virtual address space, when in fact, accessing that range of memory would not cause a wraparound to occur. Use the memory range that will actually be accessed when considering if accessing a certain amount of bytes will cause the memory address to wrap around. Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Prasad Sodagudi Signed-off-by: Isaac J. Manjarres Co-developed-by: Prasad Sodagudi Reviewed-by: William Kucharski Acked-by: Kees Cook Cc: Greg Kroah-Hartman Cc: Trilok Soni Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit c8282f1b5653b192e5066551f32a3afc6c74339b Author: Miles Chen Date: Tue Aug 13 15:37:28 2019 -0700 mm/memcontrol.c: fix use after free in mem_cgroup_iter() commit 54a83d6bcbf8f4700013766b974bf9190d40b689 upstream. This patch is sent to report an use after free in mem_cgroup_iter() after merging commit be2657752e9e ("mm: memcg: fix use after free in mem_cgroup_iter()"). I work with android kernel tree (4.9 & 4.14), and commit be2657752e9e ("mm: memcg: fix use after free in mem_cgroup_iter()") has been merged to the trees. However, I can still observe use after free issues addressed in the commit be2657752e9e. (on low-end devices, a few times this month) backtrace: css_tryget <- crash here mem_cgroup_iter shrink_node shrink_zones do_try_to_free_pages try_to_free_pages __perform_reclaim __alloc_pages_direct_reclaim __alloc_pages_slowpath __alloc_pages_nodemask To debug, I poisoned mem_cgroup before freeing it: static void __mem_cgroup_free(struct mem_cgroup *memcg) for_each_node(node) free_mem_cgroup_per_node_info(memcg, node); free_percpu(memcg->stat); + /* poison memcg before freeing it */ + memset(memcg, 0x78, sizeof(struct mem_cgroup)); kfree(memcg); } The coredump shows the position=0xdbbc2a00 is freed. (gdb) p/x ((struct mem_cgroup_per_node *)0xe5009e00)->iter[8] $13 = {position = 0xdbbc2a00, generation = 0x2efd} 0xdbbc2a00: 0xdbbc2e00 0x00000000 0xdbbc2800 0x00000100 0xdbbc2a10: 0x00000200 0x78787878 0x00026218 0x00000000 0xdbbc2a20: 0xdcad6000 0x00000001 0x78787800 0x00000000 0xdbbc2a30: 0x78780000 0x00000000 0x0068fb84 0x78787878 0xdbbc2a40: 0x78787878 0x78787878 0x78787878 0xe3fa5cc0 0xdbbc2a50: 0x78787878 0x78787878 0x00000000 0x00000000 0xdbbc2a60: 0x00000000 0x00000000 0x00000000 0x00000000 0xdbbc2a70: 0x00000000 0x00000000 0x00000000 0x00000000 0xdbbc2a80: 0x00000000 0x00000000 0x00000000 0x00000000 0xdbbc2a90: 0x00000001 0x00000000 0x00000000 0x00100000 0xdbbc2aa0: 0x00000001 0xdbbc2ac8 0x00000000 0x00000000 0xdbbc2ab0: 0x00000000 0x00000000 0x00000000 0x00000000 0xdbbc2ac0: 0x00000000 0x00000000 0xe5b02618 0x00001000 0xdbbc2ad0: 0x00000000 0x78787878 0x78787878 0x78787878 0xdbbc2ae0: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2af0: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b00: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b10: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b20: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b30: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b40: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b50: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b60: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b70: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2b80: 0x78787878 0x78787878 0x00000000 0x78787878 0xdbbc2b90: 0x78787878 0x78787878 0x78787878 0x78787878 0xdbbc2ba0: 0x78787878 0x78787878 0x78787878 0x78787878 In the reclaim path, try_to_free_pages() does not setup sc.target_mem_cgroup and sc is passed to do_try_to_free_pages(), ..., shrink_node(). In mem_cgroup_iter(), root is set to root_mem_cgroup because sc->target_mem_cgroup is NULL. It is possible to assign a memcg to root_mem_cgroup.nodeinfo.iter in mem_cgroup_iter(). try_to_free_pages struct scan_control sc = {...}, target_mem_cgroup is 0x0; do_try_to_free_pages shrink_zones shrink_node mem_cgroup *root = sc->target_mem_cgroup; memcg = mem_cgroup_iter(root, NULL, &reclaim); mem_cgroup_iter() if (!root) root = root_mem_cgroup; ... css = css_next_descendant_pre(css, &root->css); memcg = mem_cgroup_from_css(css); cmpxchg(&iter->position, pos, memcg); My device uses memcg non-hierarchical mode. When we release a memcg: invalidate_reclaim_iterators() reaches only dead_memcg and its parents. If non-hierarchical mode is used, invalidate_reclaim_iterators() never reaches root_mem_cgroup. static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg) { struct mem_cgroup *memcg = dead_memcg; for (; memcg; memcg = parent_mem_cgroup(memcg) ... } So the use after free scenario looks like: CPU1 CPU2 try_to_free_pages do_try_to_free_pages shrink_zones shrink_node mem_cgroup_iter() if (!root) root = root_mem_cgroup; ... css = css_next_descendant_pre(css, &root->css); memcg = mem_cgroup_from_css(css); cmpxchg(&iter->position, pos, memcg); invalidate_reclaim_iterators(memcg); ... __mem_cgroup_free() kfree(memcg); try_to_free_pages do_try_to_free_pages shrink_zones shrink_node mem_cgroup_iter() if (!root) root = root_mem_cgroup; ... mz = mem_cgroup_nodeinfo(root, reclaim->pgdat->node_id); iter = &mz->iter[reclaim->priority]; pos = READ_ONCE(iter->position); css_tryget(&pos->css) <- use after free To avoid this, we should also invalidate root_mem_cgroup.nodeinfo.iter in invalidate_reclaim_iterators(). [cai@lca.pw: fix -Wparentheses compilation warning] Link: http://lkml.kernel.org/r/1564580753-17531-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/20190730015729.4406-1-miles.chen@mediatek.com Fixes: 5ac8fb31ad2e ("mm: memcontrol: convert reclaim iterator to simple css refcounting") Signed-off-by: Miles Chen Signed-off-by: Qian Cai Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 3c0cb90e9212b746dd4fd341dcdf50124c90bd76 Author: Yang Shi Date: Tue Aug 13 15:37:18 2019 -0700 mm: mempolicy: handle vma with unmovable pages mapped correctly in mbind commit a53190a4aaa36494f4d7209fd1fcc6f2ee08e0e0 upstream. When running syzkaller internally, we ran into the below bug on 4.9.x kernel: kernel BUG at mm/huge_memory.c:2124! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1518 Comm: syz-executor107 Not tainted 4.9.168+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 task: ffff880067b34900 task.stack: ffff880068998000 RIP: split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 Call Trace: split_huge_page include/linux/huge_mm.h:100 [inline] queue_pages_pte_range+0x7e1/0x1480 mm/mempolicy.c:538 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:90 [inline] walk_pgd_range mm/pagewalk.c:116 [inline] __walk_page_range+0x44a/0xdb0 mm/pagewalk.c:208 walk_page_range+0x154/0x370 mm/pagewalk.c:285 queue_pages_range+0x115/0x150 mm/mempolicy.c:694 do_mbind mm/mempolicy.c:1241 [inline] SYSC_mbind+0x3c3/0x1030 mm/mempolicy.c:1370 SyS_mbind+0x46/0x60 mm/mempolicy.c:1352 do_syscall_64+0x1d2/0x600 arch/x86/entry/common.c:282 entry_SYSCALL_64_after_swapgs+0x5d/0xdb Code: c7 80 1c 02 00 e8 26 0a 76 01 <0f> 0b 48 c7 c7 40 46 45 84 e8 4c RIP [] split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 RSP with the below test: uint64_t r[1] = {0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); intptr_t res = 0; res = syscall(__NR_socket, 0x11, 3, 0x300); if (res != -1) r[0] = res; *(uint32_t*)0x20000040 = 0x10000; *(uint32_t*)0x20000044 = 1; *(uint32_t*)0x20000048 = 0xc520; *(uint32_t*)0x2000004c = 1; syscall(__NR_setsockopt, r[0], 0x107, 0xd, 0x20000040, 0x10); syscall(__NR_mmap, 0x20fed000, 0x10000, 0, 0x8811, r[0], 0); *(uint64_t*)0x20000340 = 2; syscall(__NR_mbind, 0x20ff9000, 0x4000, 0x4002, 0x20000340, 0x45d4, 3); return 0; } Actually the test does: mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 socket(AF_PACKET, SOCK_RAW, 768) = 3 setsockopt(3, SOL_PACKET, PACKET_TX_RING, {block_size=65536, block_nr=1, frame_size=50464, frame_nr=1}, 16) = 0 mmap(0x20fed000, 65536, PROT_NONE, MAP_SHARED|MAP_FIXED|MAP_POPULATE|MAP_DENYWRITE, 3, 0) = 0x20fed000 mbind(..., MPOL_MF_STRICT|MPOL_MF_MOVE) = 0 The setsockopt() would allocate compound pages (16 pages in this test) for packet tx ring, then the mmap() would call packet_mmap() to map the pages into the user address space specified by the mmap() call. When calling mbind(), it would scan the vma to queue the pages for migration to the new node. It would split any huge page since 4.9 doesn't support THP migration, however, the packet tx ring compound pages are not THP and even not movable. So, the above bug is triggered. However, the later kernel is not hit by this issue due to commit d44d363f6578 ("mm: don't assume anonymous pages have SwapBacked flag"), which just removes the PageSwapBacked check for a different reason. But, there is a deeper issue. According to the semantic of mbind(), it should return -EIO if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and MPOL_MF_STRICT was also specified, but the kernel was unable to move all existing pages in the range. The tx ring of the packet socket is definitely not movable, however, mbind() returns success for this case. Although the most socket file associates with non-movable pages, but XDP may have movable pages from gup. So, it sounds not fine to just check the underlying file type of vma in vma_migratable(). Change migrate_page_add() to check if the page is movable or not, if it is unmovable, just return -EIO. But do not abort pte walk immediately, since there may be pages off LRU temporarily. We should migrate other pages if MPOL_MF_MOVE* is specified. Set has_unmovable flag if some paged could not be not moved, then return -EIO for mbind() eventually. With this change the above test would return -EIO as expected. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-3-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-3-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi Reviewed-by: Vlastimil Babka Cc: Michal Hocko Cc: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit cd825d87140d00fbd4f6de6b51b801be89595b2c Author: Yang Shi Date: Tue Aug 13 15:37:15 2019 -0700 mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified commit d883544515aae54842c21730b880172e7894fde9 upstream. When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should try best to migrate misplaced pages, if some of the pages could not be migrated, then return -EIO. There are three different sub-cases: 1. vma is not migratable 2. vma is migratable, but there are unmovable pages 3. vma is migratable, pages are movable, but migrate_pages() fails If #1 happens, kernel would just abort immediately, then return -EIO, after a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"). If #3 happens, kernel would set policy and migrate pages with best-effort, but won't rollback the migrated pages and reset the policy back. Before that commit, they behaves in the same way. It'd better to keep their behavior consistent. But, rolling back the migrated pages and resetting the policy back sounds not feasible, so just make #1 behave as same as #3. Userspace will know that not everything was successfully migrated (via -EIO), and can take whatever steps it deems necessary - attempt rollback, determine which exact page(s) are violating the policy, etc. Make queue_pages_range() return 1 to indicate there are unmovable pages or vma is not migratable. The #2 is not handled correctly in the current kernel, the following patch will fix it. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-2-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi Reviewed-by: Vlastimil Babka Cc: Michal Hocko Cc: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit f0fed8283deb13d36ff8285f4c93bd012dae554d Author: Ralph Campbell Date: Tue Aug 13 15:37:11 2019 -0700 mm/hmm: fix bad subpage pointer in try_to_unmap_one commit 1de13ee59225dfc98d483f8cce7d83f97c0b31de upstream. When migrating an anonymous private page to a ZONE_DEVICE private page, the source page->mapping and page->index fields are copied to the destination ZONE_DEVICE struct page and the page_mapcount() is increased. This is so rmap_walk() can be used to unmap and migrate the page back to system memory. However, try_to_unmap_one() computes the subpage pointer from a swap pte which computes an invalid page pointer and a kernel panic results such as: BUG: unable to handle page fault for address: ffffea1fffffffc8 Currently, only single pages can be migrated to device private memory so no subpage computation is needed and it can be set to "page". [rcampbell@nvidia.com: add comment] Link: http://lkml.kernel.org/r/20190724232700.23327-4-rcampbell@nvidia.com Link: http://lkml.kernel.org/r/20190719192955.30462-4-rcampbell@nvidia.com Fixes: a5430dda8a3a1c ("mm/migrate: support un-addressable ZONE_DEVICE page in migration") Signed-off-by: Ralph Campbell Cc: "Jérôme Glisse" Cc: "Kirill A. Shutemov" Cc: Mike Kravetz Cc: Christoph Hellwig Cc: Jason Gunthorpe Cc: John Hubbard Cc: Andrea Arcangeli Cc: Andrey Ryabinin Cc: Christoph Lameter Cc: Dan Williams Cc: Dave Hansen Cc: Ira Weiny Cc: Jan Kara Cc: Lai Jiangshan Cc: Logan Gunthorpe Cc: Martin Schwidefsky Cc: Matthew Wilcox Cc: Mel Gorman Cc: Michal Hocko Cc: Pekka Enberg Cc: Randy Dunlap Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 3858cca150c69ea8dbc1f1b03fd444d99fb747b7 Author: NeilBrown Date: Tue Aug 13 15:37:44 2019 -0700 seq_file: fix problem when seeking mid-record commit 6a2aeab59e97101b4001bac84388fc49a992f87e upstream. If you use lseek or similar (e.g. pread) to access a location in a seq_file file that is within a record, rather than at a record boundary, then the first read will return the remainder of the record, and the second read will return the whole of that same record (instead of the next record). When seeking to a record boundary, the next record is correctly returned. This bug was introduced by a recent patch (identified below). Before that patch, seq_read() would increment m->index when the last of the buffer was returned (m->count == 0). After that patch, we rely on ->next to increment m->index after filling the buffer - but there was one place where that didn't happen. Link: https://lkml.kernel.org/lkml/877e7xl029.fsf@notabene.neil.brown.name/ Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface") Signed-off-by: NeilBrown Reported-by: Sergei Turchanov Tested-by: Sergei Turchanov Cc: Alexander Viro Cc: Markus Elfring Cc: [4.19+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 50d15197254a1efb0374fc1da2a0b98c78da49b3 Author: Gustavo A. R. Silva Date: Fri Aug 9 23:43:56 2019 -0500 sh: kernel: hw_breakpoint: Fix missing break in switch statement commit 1ee1119d184bb06af921b48c3021d921bbd85bac upstream. Add missing break statement in order to prevent the code from falling through to case SH_BREAKPOINT_WRITE. Fixes: 09a072947791 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.") Cc: stable@vger.kernel.org Reviewed-by: Geert Uytterhoeven Reviewed-by: Guenter Roeck Tested-by: Guenter Roeck Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman commit a5aa80588fcd5520ece36121c41b7d8e72245e33 Author: Greg Kroah-Hartman Date: Fri Aug 16 10:12:54 2019 +0200 Linux 4.19.67 commit ac2951114955cc36f21108e8cd3dfaf6c9026f62 Author: Luca Coelho Date: Fri Jul 19 12:21:59 2019 +0300 iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support commit f5a47fae6aa3eb06f100e701d2342ee56b857bee upstream. We erroneously added a check for FW API version 41 before sending GEO_TX_POWER_LIMIT, but this was already implemented in version 38. Additionally, it was cherry-picked to older versions, namely 17, 26 and 29, so check for those as well. Cc: stable@vger.kernel.org Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares") Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 6a81677a2e653af3dbe71f007d7fb86562fd0db8 Author: Luca Coelho Date: Mon Jun 24 22:29:33 2019 +0300 iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41 commit 39bd984c203e86f3109b49c2a2e20677c4d3ab65 upstream. Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT command, and sending it to the firmware will cause a firmware crash. We allow this via debugfs, so we need to return an error value in case it's not supported. This had already been fixed during init, when we send the command if the ACPI WGDS table is present. Fix it also for the other, userspace-triggered case. Cc: stable@vger.kernel.org Fixes: 7fe90e0e3d60 ("iwlwifi: mvm: refactor geo init") Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 80bac45e3ad88e026bbb80c4bd9c49fc50418003 Author: Emmanuel Grumbach Date: Mon Jul 22 12:47:27 2019 +0300 iwlwifi: mvm: fix an out-of-bound access commit ba3224db78034435e9ff0247277cce7c7bb1756c upstream. The index for the elements of the ACPI object we dereference was static. This means that if we called the function twice we wouldn't start from 3 again, but rather from the latest index we reached in the previous call. This was dutifully reported by KASAN. Fix this. Cc: stable@vger.kernel.org Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 7626b510fc77c6828a1989fd3d032597f934d347 Author: Emmanuel Grumbach Date: Sun Jul 21 14:02:27 2019 +0300 iwlwifi: don't unmap as page memory that was mapped as single commit 87e7e25aee6b59fef740856f4e86d4b60496c9e1 upstream. In order to remember how to unmap a memory (as single or as page), we maintain a bit per Transmit Buffer (TBs) in the meta data (structure iwl_cmd_meta). We maintain a bitmap: 1 bit per TB. If the TB is set, we will free the memory as a page. This bitmap was never cleared. Fix this. Cc: stable@vger.kernel.org Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit b38c56b76dcce71e8885190d13bb49979fcb6127 Author: Brian Norris Date: Wed Jul 24 12:46:34 2019 -0700 mwifiex: fix 802.11n/WPA detection commit df612421fe2566654047769c6852ffae1a31df16 upstream. Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") adjusted the ieee_types_vendor_header struct, which inadvertently messed up the offsets used in mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring mwifiex_is_rsn_oui_present(). As it stands, commit 63d7ef36103d breaks compatibility with WPA (not WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is not supported by AP" case in mwifiex_is_network_compatible(). Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: Signed-off-by: Brian Norris Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman commit 2bc73d91411423dd7092596f9c0f91d3ea5a9e26 Author: Wanpeng Li Date: Mon Aug 5 10:03:19 2019 +0800 KVM: Fix leak vCPU's VMCS value into other pCPU commit 17e433b54393a6269acbcb792da97791fe1592d8 upstream. After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Christian Borntraeger Cc: Marc Zyngier Cc: stable@vger.kernel.org Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit d1489f0b4de73a06f10d3cc9c7dddc5f89784abb Author: Trond Myklebust Date: Sat Aug 3 10:28:18 2019 -0400 NFSv4: Fix an Oops in nfs4_do_setattr commit 09a54f0ebfe263bc27c90bbd80187b9a93283887 upstream. If the user specifies an open mode of 3, then we don't have a NFSv4 state attached to the context, and so we Oops when we try to dereference it. Reported-by: Olga Kornievskaia Fixes: 29b59f9416937 ("NFSv4: change nfs4_do_setattr to take...") Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org # v4.10: 991eedb1371dc: NFSv4: Only pass the... Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Greg Kroah-Hartman commit 898c19f1b4c8b9429dee99e3fdbc2cfa2464eb60 Author: Steve French Date: Thu Jul 25 18:13:10 2019 -0500 smb3: send CAP_DFS capability during session setup commit 8d33096a460d5b9bd13300f01615df5bb454db10 upstream. We had a report of a server which did not do a DFS referral because the session setup Capabilities field was set to 0 (unlike negotiate protocol where we set CAP_DFS). Better to send it session setup in the capabilities as well (this also more closely matches Windows client behavior). Signed-off-by: Steve French Reviewed-off-by: Ronnie Sahlberg Reviewed-by: Pavel Shilovsky CC: Stable Signed-off-by: Greg Kroah-Hartman commit 50831f1a2f570eb7007c60519f21652342f1d07c Author: Pavel Shilovsky Date: Mon Jul 22 11:34:59 2019 -0700 SMB3: Fix deadlock in validate negotiate hits reconnect commit e99c63e4d86d3a94818693147b469fa70de6f945 upstream. Currently we skip SMB2_TREE_CONNECT command when checking during reconnect because Tree Connect happens when establishing an SMB session. For SMB 3.0 protocol version the code also calls validate negotiate which results in SMB2_IOCL command being sent over the wire. This may deadlock on trying to acquire a mutex when checking for reconnect. Fix this by skipping SMB2_IOCL command when doing the reconnect check. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French Reviewed-by: Ronnie Sahlberg CC: Stable Signed-off-by: Greg Kroah-Hartman commit 2afa6c13e498f4e082e4b6afc09b3e12e4152f1f Author: Vivek Goyal Date: Fri Aug 2 15:29:56 2019 -0400 dax: dax_layout_busy_page() should not unmap cow pages commit d75996dd022b6d83bd14af59b2775b1aa639e4b9 upstream. Vivek: "As of now dax_layout_busy_page() calls unmap_mapping_range() with last argument as 1, which says even unmap cow pages. I am wondering who needs to get rid of cow pages as well. I noticed one interesting side affect of this. I mount xfs with -o dax and mmaped a file with MAP_PRIVATE and wrote some data to a page which created cow page. Then I called fallocate() on that file to zero a page of file. fallocate() called dax_layout_busy_page() which unmapped cow pages as well and then I tried to read back the data I wrote and what I get is old data from persistent memory. I lost the data I had written. This read basically resulted in new fault and read back the data from persistent memory. This sounds wrong. Are there any users which need to unmap cow pages as well? If not, I am proposing changing it to not unmap cow pages. I noticed this while while writing virtio_fs code where when I tried to reclaim a memory range and that corrupted the executable and I was running from virtio-fs and program got segment violation." Dan: "In fact the unmap_mapping_range() in this path is only to synchronize against get_user_pages_fast() and force it to call back into the filesystem to re-establish the mapping. COW pages should be left untouched by dax_layout_busy_page()." Cc: Fixes: 5fac7408d828 ("mm, fs, dax: handle layout changes to pinned dax mappings") Signed-off-by: Vivek Goyal Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman commit a566750c3a78b0dc78c328a88ded49db4f7876ea Author: Brian Norris Date: Fri Jul 26 15:47:58 2019 -0700 mac80211: don't WARN on short WMM parameters from AP commit 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream. In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit af9d64f871cfe441508f116f31b49410453f96db Author: Takashi Iwai Date: Tue Aug 6 17:31:48 2019 +0200 ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457) commit c02f77d32d2c45cfb1b2bb99eabd8a78f5ecc7db upstream. A long-time problem on the recent AMD chip (X370, X470, B450, etc with PCI ID 1022:1457) with Realtek codecs is the crackled or distorted sound for capture streams, as well as occasional playback hiccups. After lengthy debugging sessions, the workarounds we've found are like the following: - Set up the proper driver caps for this controller, similar as the other AMD controller. - Correct the DMA position reporting with the fixed FIFO size, which is similar like as workaround used for VIA chip set. - Even after the position correction, PulseAudio still shows mysterious stalls of playback streams when a capture is triggered in timer-scheduled mode. Since we have no clear way to eliminate the stall, pass the BATCH PCM flag for PA to suppress the tsched mode as a temporary workaround. This patch implements the workarounds. For the driver caps, it defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO- corrected position reporting (corresponding to the new position_fix=6) and enforces the SNDRV_PCM_INFO_BATCH flag. Note that the current implementation is merely a workaround. Hopefully we'll find a better alternative in future, especially about removing the BATCH flag hack again. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 06f0bcaceb8cc506b58e81b63fae9f1fb949f12b Author: Takashi Iwai Date: Tue Aug 6 14:03:56 2019 +0200 ALSA: hda - Don't override global PCM hw info flag commit c1c6c877b0c79fd7e05c931435aa42211eaeebaf upstream. The commit bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") introduced the conditional PCM hw info setup, but it overwrites the global azx_pcm_hw object. This will cause a problem if any other HD-audio controller, as it'll inherit the same bit flag although another controller doesn't support that feature. Fix the bug by setting the PCM hw info flag locally. Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 1c286e4e13f258a948dc20396eaae475ea930040 Author: Wenwen Wang Date: Wed Aug 7 04:08:51 2019 -0500 ALSA: hiface: fix multiple memory leak bugs commit 3d92aa45fbfd7319e3a19f4ec59fd32b3862b723 upstream. In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and 'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs. Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails. To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'. Fixes: a91c3fb2f842 ("Add M2Tech hiFace USB-SPDIF driver") Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit bc972b6b52e2ddd93b7532cd2213d9c2be5d6340 Author: Wenwen Wang Date: Thu Aug 8 00:50:58 2019 -0500 ALSA: firewire: fix a memory leak bug commit 1be3c1fae6c1e1f5bb982b255d2034034454527a upstream. In iso_packets_buffer_init(), 'b->packets' is allocated through kmalloc_array(). Then, the aligned packet size is checked. If it is larger than PAGE_SIZE, -EINVAL will be returned to indicate the error. However, the allocated 'b->packets' is not deallocated on this path, leading to a memory leak. To fix the above issue, free 'b->packets' before returning the error code. Fixes: 31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver") Signed-off-by: Wenwen Wang Reviewed-by: Takashi Sakamoto Cc: # v2.6.39+ Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit edc388566a1d25f88e631bd8170462d4f86c5a24 Author: Stanislav Lisovskiy Date: Fri Jul 12 11:19:38 2019 +0300 drm/i915: Fix wrong escape clock divisor init for GLK commit 73a0ff0b30af79bf0303d557eb82f1d1945bb6ee upstream. According to Bspec clock divisor registers in GeminiLake should be initialized by shifting 1(<<) to amount of correspondent divisor. While i915 was writing all this time that value as is. Surprisingly that it by accident worked, until we met some issues with Microtech Etab. v2: Added Fixes tag and cc v3: Added stable to cc as well. Signed-off-by: Stanislav Lisovskiy Reviewed-by: Vandita Kulkarni Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826 Fixes: bcc657004841 ("drm/i915/glk: Program txesc clock divider for GLK") Cc: Deepak M Cc: Madhav Chauhan Cc: Jani Nikula Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20190712081938.14185-1-stanislav.lisovskiy@intel.com (cherry picked from commit ce52ad5dd52cfaf3398058384e0ff94134bbd89c) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit a73027204ac5f1a7333851e50bfad55461b81378 Author: Guenter Roeck Date: Fri Jul 26 08:00:49 2019 -0700 hwmon: (nct7802) Fix wrong detection of in4 presence commit 38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream. The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by: Gilles Buloz Cc: Gilles Buloz Cc: stable@vger.kernel.org Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 9ce1b3eb5489416338b2fb2b40f30f0d425700b4 Author: Tomas Bortoli Date: Wed Jul 31 10:54:47 2019 -0400 can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices commit 30a8beeb3042f49d0537b7050fd21b490166a3d9 upstream. Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by: Tomas Bortoli Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit cab569a44a524709d95bbd88700860ac45e5d5cf Author: Tomas Bortoli Date: Wed Jul 31 10:54:47 2019 -0400 can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices commit ead16e53c2f0ed946d82d4037c630e2f60f4ab69 upstream. Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by: Tomas Bortoli Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack") Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit d4d904e4e258e1e5c794af3e702d6f6ecc8fd56d Author: Wenwen Wang Date: Tue Aug 6 03:00:27 2019 -0400 ALSA: usb-audio: fix a memory leak bug commit a67060201b746a308b1674f66bf289c9faef6d09 upstream. In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is allocated through kzalloc() before the execution goto 'found_clock'. However, this structure is not deallocated if the memory allocation for 'pd' fails, leading to a memory leak bug. To fix the above issue, free 'fp->chmap' before returning NULL. Fixes: 7edf3b5e6a45 ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e0d262a57fc741a9b362e458c714e37a77ddb62d Author: Nick Desaulniers Date: Wed Aug 7 15:15:32 2019 -0700 x86/purgatory: Do not use __builtin_memcpy and __builtin_memset commit 4ce97317f41d38584fb93578e922fcd19e535f5b upstream. Implementing memcpy and memset in terms of __builtin_memcpy and __builtin_memset is problematic. GCC at -O2 will replace calls to the builtins with calls to memcpy and memset (but will generate an inline implementation at -Os). Clang will replace the builtins with these calls regardless of optimization level. $ llvm-objdump -dr arch/x86/purgatory/string.o | tail 0000000000000339 memcpy: 339: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 000000000000033b: R_X86_64_64 memcpy 343: ff e0 jmpq *%rax 0000000000000345 memset: 345: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 0000000000000347: R_X86_64_64 memset 34f: ff e0 Such code results in infinite recursion at runtime. This is observed when doing kexec. Instead, reuse an implementation from arch/x86/boot/compressed/string.c. This requires to implement a stub function for warn(). Also, Clang may lower memcmp's that compare against 0 to bcmp's, so add a small definition, too. See also: commit 5f074f3e192f ("lib/string.c: implement a basic bcmp") Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality") Reported-by: Vaibhav Rustagi Debugged-by: Vaibhav Rustagi Debugged-by: Manoj Gupta Suggested-by: Alistair Delva Signed-off-by: Nick Desaulniers Signed-off-by: Thomas Gleixner Tested-by: Vaibhav Rustagi Cc: stable@vger.kernel.org Link: https://bugs.chromium.org/p/chromium/issues/detail?id=984056 Link: https://lkml.kernel.org/r/20190807221539.94583-1-ndesaulniers@google.com Signed-off-by: Greg Kroah-Hartman commit 1182930700967e28800e75f7a999307dd191f68e Author: Roderick Colenbrander Date: Fri Aug 2 15:50:19 2019 -0700 HID: sony: Fix race condition between rumble and device remove. commit e0f6974a54d3f7f1b5fdf5a593bd43ce9206ec04 upstream. Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4 gamepad while rumble is enabled. This issue is reproducible with a frequency of 1 in 3 times in the game Borderlands 2 when using an automatic weapon, which triggers many rumble operations. We found the issue to be a race condition between sony_remove and the final device destruction by the HID / input system. The problem was that sony_remove didn't clean some of its work_item state in "struct sony_sc". After sony_remove work, the corresponding evdev node was around for sufficient time for applications to still queue rumble work after "sony_remove". On pre-4.19 kernels the race condition caused a kernel crash due to a NULL-pointer dereference as "sc->output_report_dmabuf" got freed during sony_remove. On newer kernels this crash doesn't happen due the buffer now being allocated using devm_kzalloc. However we can still queue work, while the driver is an undefined state. This patch fixes the described problem, by guarding the work_item "state_worker" with an initialized variable, which we are setting back to 0 on cleanup. Signed-off-by: Roderick Colenbrander CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 5c4689cbe95ad597a416baa55bcb1fa05311fd86 Author: Halil Pasic Date: Wed Jul 24 00:51:55 2019 +0200 s390/dma: provide proper ARCH_ZONE_DMA_BITS value [ Upstream commit 1a2dcff881059dedc14fafc8a442664c8dbd60f1 ] On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits. The current value is 24 and makes __dma_direct_alloc_pages() take a wrong turn first (but __dma_direct_alloc_pages() recovers then). Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns. Signed-off-by: Halil Pasic Reported-by: Petr Tesarik Fixes: c61e9637340e ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32") Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin commit d768173982ece75b8ef821897e32fd0da9d60131 Author: Leonard Crestez Date: Wed Jul 24 15:53:24 2019 +0300 perf/core: Fix creating kernel counters for PMUs that override event->cpu [ Upstream commit 4ce54af8b33d3e21ca935fc1b89b58cbba956051 ] Some hardware PMU drivers will override perf_event.cpu inside their event_init callback. This causes a lockdep splat when initialized through the kernel API: WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208 pc : ctx_sched_out+0x78/0x208 Call trace: ctx_sched_out+0x78/0x208 __perf_install_in_context+0x160/0x248 remote_function+0x58/0x68 generic_exec_single+0x100/0x180 smp_call_function_single+0x174/0x1b8 perf_install_in_context+0x178/0x188 perf_event_create_kernel_counter+0x118/0x160 Fix this by calling perf_install_in_context with event->cpu, just like perf_event_open Signed-off-by: Leonard Crestez Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Mark Rutland Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Frank Li Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 06dc92142b5efbacd051b21ac7d74abd96240779 Author: Peter Zijlstra Date: Thu Jul 18 15:03:15 2019 +0200 tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop [ Upstream commit 952041a8639a7a3a73a2b6573cb8aa8518bc39f8 ] While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of a bug we just found for rwsem. X = 0; CPU0 CPU1 rwsem_down_read() for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); X = 1; rwsem_up_write(); rwsem_mark_wake() atomic_long_add(adjustment, &sem->count); smp_store_release(&waiter->task, NULL); if (!waiter.task) break; ... } r = X; Allows 'r == 0'. Reported-by: Will Deacon Signed-off-by: Peter Zijlstra (Intel) Acked-by: Will Deacon Cc: Linus Torvalds Cc: Peter Hurley Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore") Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 0ba69e96cc625786bca775f4e9e8f9d06d512d1a Author: Wenwen Wang Date: Sun Jul 14 01:11:35 2019 -0500 test_firmware: fix a memory leak bug [ Upstream commit d4fddac5a51c378c5d3e68658816c37132611e1f ] In test_firmware_init(), the buffer pointed to by the global pointer 'test_fw_config' is allocated through kzalloc(). Then, the buffer is initialized in __test_firmware_config_init(). In the case that the initialization fails, the following execution in test_firmware_init() needs to be terminated with an error code returned to indicate this failure. However, the allocated buffer is not freed on this execution path, leading to a memory leak bug. To fix the above issue, free the allocated buffer before returning from test_firmware_init(). Signed-off-by: Wenwen Wang Link: https://lore.kernel.org/r/1563084696-6865-1-git-send-email-wang6495@umn.edu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit cdd92ebe29c2e36c6b76d0e404ffb6d3d191ec5b Author: Hannes Reinecke Date: Fri Jul 12 08:53:47 2019 +0200 scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG [ Upstream commit 20122994e38aef0ae50555884d287adde6641c94 ] Retrying immediately after we've received a 'transitioning' sense code is pretty much pointless, we should always use a delay before retrying. So ensure the default delay is applied before retrying. Signed-off-by: Hannes Reinecke Tested-by: Zhangguanghui Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit b620c6d5779a3319fe9970e8b84b1027233f6921 Author: Tyrel Datwyler Date: Wed Jul 17 14:48:27 2019 -0500 scsi: ibmvfc: fix WARN_ON during event pool release [ Upstream commit 5578257ca0e21056821e6481bd534ba267b84e58 ] While removing an ibmvfc client adapter a WARN_ON like the following WARN_ON is seen in the kernel log: WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541 ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1 NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20 REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest) MSR: 800000010282b033 CR: 44008828 XER: 20000000 CFAR: c00000000036e408 SOFTE: 1 GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448 GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001 GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640 GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598 GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0 GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100 GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8 NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] Call Trace: [c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable) [c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc] [c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100 [c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0 [c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100 [c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140 [c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0 [c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50 [c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc] [c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0 [c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c Instruction dump: e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200 2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028 This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path we have quiesced the adapter and its overly paranoid anyways to be holding the host lock. Reported-by: Abdul Haleem Signed-off-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f254faed41531234999117955bc388346301dee5 Author: Junxiao Bi Date: Mon Jul 22 09:15:24 2019 -0700 scsi: megaraid_sas: fix panic on loading firmware crashdump [ Upstream commit 3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ] While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi Acked-by: Sumit Saxena Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit bb41940c89bd16d55afd81335719e4fc7205c469 Author: Arnd Bergmann Date: Mon Jul 22 16:55:52 2019 +0200 ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux [ Upstream commit 3a9d2569e45cb02769cda26fee4a02126867c934 ] The mdio-bus-mux has no #address-cells/#size-cells property, which causes a few dtc warnings: arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value Add the normal cell numbers. Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de Fixes: 2bebdfcdcd0f ("ARM: dts: BCM5301X: Add support for Linksys EA9500") Signed-off-by: Arnd Bergmann Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin commit 19e7df3e4fe77f788343213103c5d2b054d0ff91 Author: Arnd Bergmann Date: Mon Jul 22 16:51:50 2019 +0200 ARM: davinci: fix sleep.S build error on ARMv4 [ Upstream commit d64b212ea960db4276a1d8372bd98cb861dfcbb0 ] When building a multiplatform kernel that includes armv4 support, the default target CPU does not support the blx instruction, which leads to a build failure: arch/arm/mach-davinci/sleep.S: Assembler messages: arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode Add a .arch statement in the sources to make this file build. Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de Acked-by: Sekhar Nori Signed-off-by: Arnd Bergmann Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin commit bdce5621e6b04ea5ca34e756f692614d0d264287 Author: Marta Rybczynska Date: Tue Jul 23 07:41:20 2019 +0200 nvme: fix multipath crash when ANA is deactivated [ Upstream commit 66b20ac0a1a10769d059d6903202f53494e3d902 ] Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska Tested-by: Jean-Baptiste Riaux Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit b1689742ff4ad874a4df3ffc01b4315e6354980f Author: Lorenzo Pieralisi Date: Mon Jul 22 17:25:48 2019 +0100 ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id() [ Upstream commit 5a46d3f71d5e5a9f82eabc682f996f1281705ac7 ] Static analysis identified that index comparison against ITS entries in iort_dev_find_its_id() is off by one. Update the comparison condition and clarify the resulting error message. Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling") Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/ Reviewed-by: Hanjun Guo Reported-by: Dan Carpenter Signed-off-by: Lorenzo Pieralisi Cc: Dan Carpenter Cc: Will Deacon Cc: Hanjun Guo Cc: Sudeep Holla Cc: Catalin Marinas Cc: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 38c919ec7b305b2934d7b9a1b8fdd05325974030 Author: Arnd Bergmann Date: Mon Jul 22 14:26:34 2019 +0200 drbd: dynamically allocate shash descriptor [ Upstream commit 77ce56e2bfaa64127ae5e23ef136c0168b818777 ] Building with clang and KASAN, we get a warning about an overly large stack frame on 32-bit architectures: drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect' [-Werror,-Wframe-larger-than=] We already allocate other data dynamically in this function, so just do the same for the shash descriptor, which makes up most of this memory. Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/ Reviewed-by: Kees Cook Reviewed-by: Roland Kammerer Signed-off-by: Arnd Bergmann Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit f4e2d182d6a6770243f7803003ed556c3963da6f Author: Arnaldo Carvalho de Melo Date: Thu Jul 18 11:28:37 2019 -0300 perf probe: Avoid calling freeing routine multiple times for same pointer [ Upstream commit d95daf5accf4a72005daa13fbb1d1bd8709f2861 ] When perf_add_probe_events() we call cleanup_perf_probe_events() for the pev pointer it receives, then, as part of handling this failure the main 'perf probe' goes on and calls cleanup_params() and that will again call cleanup_perf_probe_events()for the same pointer, so just set nevents to zero when handling the failure of perf_add_probe_events() to avoid the double free. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Masami Hiramatsu Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 101a155436fe1e20be0c9c23d387698e59932354 Author: Jiri Olsa Date: Mon Jul 15 16:04:26 2019 +0200 perf tools: Fix proper buffer size for feature processing [ Upstream commit 79b2fe5e756163897175a8f57d66b26cd9befd59 ] After Song Liu's segfault fix for pipe mode, Arnaldo reported following error: # perf record -o - | perf script 0x514 [0x1ac]: failed to process type: 80 It's caused by wrong buffer size setup in feature processing, which makes cpu topology feature fail, because it's using buffer size to recognize its header version. Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: David Carrillo-Cisneros Cc: Kan Liang Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Song Liu Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode") Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit b065f404c946804a4cca28f483e1dd9b343395ee Author: Charles Keepax Date: Mon Jul 22 10:24:36 2019 +0100 ALSA: compress: Be more restrictive about when a drain is allowed [ Upstream commit 3b8179944cb0dd53e5223996966746cdc8a60657 ] Draining makes little sense in the situation of hardware overrun, as the hardware will have consumed all its available samples. Additionally, draining whilst the stream is paused would presumably get stuck as no data is being consumed on the DSP side. Signed-off-by: Charles Keepax Acked-by: Vinod Koul Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 30dd700da7de7b1c4f382a7a8637ccc4cae506b9 Author: Charles Keepax Date: Mon Jul 22 10:24:35 2019 +0100 ALSA: compress: Don't allow paritial drain operations on capture streams [ Upstream commit a70ab8a8645083f3700814e757f2940a88b7ef88 ] Partial drain and next track are intended for gapless playback and don't really have an obvious interpretation for a capture stream, so makes sense to not allow those operations on capture streams. Signed-off-by: Charles Keepax Acked-by: Vinod Koul Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit f1ea9a6387709a6f13665140f74cd8df0ec9337d Author: Charles Keepax Date: Mon Jul 22 10:24:34 2019 +0100 ALSA: compress: Prevent bypasses of set_params [ Upstream commit 26c3f1542f5064310ad26794c09321780d00c57d ] Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which allow a transition to SNDRV_PCM_STATE_SETUP. The stream should only be able to move to the setup state once it has received a SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing those ioctls whilst in the open state. Signed-off-by: Charles Keepax Acked-by: Vinod Koul Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit b9e2fa1e15b7a9edfe77d0059a2c7e8f31c58a15 Author: Charles Keepax Date: Mon Jul 22 10:24:33 2019 +0100 ALSA: compress: Fix regression on compressed capture streams [ Upstream commit 4475f8c4ab7b248991a60d9c02808dbb813d6be8 ] A previous fix to the stop handling on compressed capture streams causes some knock on issues. The previous fix updated snd_compr_drain_notify to set the state back to PREPARED for capture streams. This causes some issues however as the handling for snd_compr_poll differs between the two states and some user-space applications were relying on the poll failing after the stream had been stopped. To correct this regression whilst still fixing the original problem the patch was addressing, update the capture handling to skip the PREPARED state rather than skipping the SETUP state as it has done until now. Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams") Signed-off-by: Charles Keepax Acked-by: Vinod Koul Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 77868c0003cc0369d88df858239393545db12769 Author: Julian Wiedmann Date: Thu Jul 11 18:17:36 2019 +0200 s390/qdio: add sanity checks to the fast-requeue path [ Upstream commit a6ec414a4dd529eeac5c3ea51c661daba3397108 ] If the device driver were to send out a full queue's worth of SBALs, current code would end up discovering the last of those SBALs as PRIMED and erroneously skip the SIGA-w. This immediately stalls the queue. Add a check to not attempt fast-requeue in this case. While at it also make sure that the state of the previous SBAL was successfully extracted before inspecting it. Signed-off-by: Julian Wiedmann Reviewed-by: Jens Remus Signed-off-by: Heiko Carstens Signed-off-by: Sasha Levin commit 8729fe83b0d56c1dabd33b61abce5c0924114b96 Author: Wen Yang Date: Wed Jul 17 11:55:04 2019 +0800 cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init() [ Upstream commit e0a12445d1cb186d875410d093a00d215bec6a89 ] The cpu variable is still being used in the of_get_property() call after the of_node_put() call, which may result in use-after-free. Fixes: a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak") Signed-off-by: Wen Yang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 991c4756be69417f720734ceb32a22071e0aa0af Author: Qian Cai Date: Mon Jul 22 15:14:46 2019 -0400 drm: silence variable 'conn' set but not used [ Upstream commit bbb6fc43f131f77fcb7ae8081f6d7c51396a2120 ] The "struct drm_connector" iteration cursor from "for_each_new_connector_in_state" is never used in atomic_remove_fb() which generates a compilation warning, drivers/gpu/drm/drm_framebuffer.c: In function 'atomic_remove_fb': drivers/gpu/drm/drm_framebuffer.c:838:24: warning: variable 'conn' set but not used [-Wunused-but-set-variable] Silence it by marking "conn" __maybe_unused. Signed-off-by: Qian Cai Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/1563822886-13570-1-git-send-email-cai@lca.pw Signed-off-by: Sasha Levin commit ca1b1940a32a4cbdaee43e1073a72712eb60118d Author: Björn Gerhart Date: Mon Jul 15 18:33:55 2019 +0200 hwmon: (nct6775) Fix register address and added missed tolerance for nct6106 [ Upstream commit f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ] Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and added missed NCT6106_REG_TOLERANCE_H. Fixes: 6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D") Signed-off-by: Bjoern Gerhart Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 56dc57c705efe743de9bb13b48ea3ea771213190 Author: Navid Emamdoost Date: Sun Jul 21 01:37:31 2019 -0500 allocate_flower_entry: should check for null deref [ Upstream commit bb1320834b8a80c6ac2697ab418d066981ea08ba ] allocate_flower_entry does not check for allocation success, but tries to deref the result. I only moved the spin_lock under null check, because the caller is checking allocation's status at line 652. Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f4cfdd46b3563ff33f167fd44b022e78981bcda8 Author: Brian Norris Date: Wed Jul 17 18:57:12 2019 -0700 mac80211: don't warn about CW params when not using them [ Upstream commit d2b3fe42bc629c2d4002f652b3abdfb2e72991c7 ] ieee80211_set_wmm_default() normally sets up the initial CW min/max for each queue, except that it skips doing this if the driver doesn't support ->conf_tx. We still end up calling drv_conf_tx() in some cases (e.g., ieee80211_reconfig()), which also still won't do anything useful...except it complains here about the invalid CW parameters. Let's just skip the WARN if we weren't going to do anything useful with the parameters. Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20190718015712.197499-1-briannorris@chromium.org Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit f2fd89817212fbbe2e67b04a4fa80f1e992ff812 Author: John Crispin Date: Thu Jun 27 11:58:32 2019 +0200 nl80211: fix NL80211_HE_MAX_CAPABILITY_LEN [ Upstream commit 5edaac063bbf1267260ad2a5b9bb803399343e58 ] NL80211_HE_MAX_CAPABILITY_LEN has changed between D2.0 and D4.0. It is now MAC (6) + PHY (11) + MCS (12) + PPE (25) = 54. Signed-off-by: John Crispin Link: https://lore.kernel.org/r/20190627095832.19445-1-john@phrozen.org Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 492c158ab2c0c99301f73deda38ca45dea3fe25e Author: Thomas Tai Date: Thu Jul 18 18:37:34 2019 +0000 iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND [ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ] iscsi_ibft can use ACPI to find the iBFT entry during bootup, currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is a X86 legacy way to find the iBFT by searching through the low memory. This patch changes the dependency so that other arch like ARM64 can use ISCSI_IBFT as long as the arch supports ACPI. ibft_init() needs to use the global variable ibft_addr declared in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected. Moving ibft_addr into the iscsi_ibft.c does not work because if ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't be able to find the variable at compile time. Signed-off-by: Thomas Tai Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Sasha Levin commit 8d641499bf969a284161d2682b71669c96389773 Author: Tai Man Date: Fri Jun 28 11:40:38 2019 -0400 drm/amd/display: Increase size of audios array [ Upstream commit 7352193a33dfc9b69ba3bf6a8caea925b96243b1 ] [Why] The audios array defined in "struct resource_pool" is only 6 (MAX_PIPES) but the max number of audio devices (num_audio) is 7. In some projects, it will run out of audios array. [How] Incraese the audios array size to 7. Signed-off-by: Tai Man Reviewed-by: Joshua Aberback Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit f9420bfa29f9ece0b02a5435ae95f1a48bc97723 Author: Alvin Lee Date: Thu Jul 4 15:17:42 2019 -0400 drm/amd/display: Only enable audio if speaker allocation exists [ Upstream commit 6ac25e6d5b2fbf251e9fa2f4131d42c815b43867 ] [Why] In dm_helpers_parse_edid_caps, there is a corner case where no speakers can be allocated even though the audio mode count is greater than 0. Enabling audio when no speaker allocations exists can cause issues in the video stream. [How] Add a check to not enable audio unless one or more speaker allocations exist (since doing this can cause issues in the video stream). Signed-off-by: Alvin Lee Reviewed-by: Jun Lei Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 3998e684463a7fa1721c171172ca085978d03a00 Author: Julian Parkin Date: Tue Jun 25 14:55:53 2019 -0400 drm/amd/display: Fix dc_create failure handling and 666 color depths [ Upstream commit 0905f32977268149f06e3ce6ea4bd6d374dd891f ] [Why] It is possible (but very unlikely) that constructing dc fails before current_state is created. We support 666 color depth in some scenarios, but this isn't handled in get_norm_pix_clk. It uses exactly the same pixel clock as the 888 case. [How] Check for non null current_state before destructing. Add case for 666 color depth to get_norm_pix_clk to avoid assertion. Signed-off-by: Julian Parkin Reviewed-by: Charlene Liu Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit e7a8a794109c07e0b8d7bd55fbfcb3082991626a Author: Tai Man Date: Fri Jun 7 17:32:27 2019 -0400 drm/amd/display: use encoder's engine id to find matched free audio device [ Upstream commit 74eda776d7a4e69ec7aa1ce30a87636f14220fbb ] [Why] On some platforms, the encoder id 3 is not populated. So the encoders are not stored in right order as index (id: 0, 1, 2, 4, 5) at pool. This would cause encoders id 4 & id 5 to fail when finding corresponding audio device, defaulting to the first available audio device. As result, we cannot stream audio into two DP ports with encoders id 4 & id 5. [How] It need to create enough audio device objects (0 - 5) to perform matching. Then use encoder engine id to find matched audio device. Signed-off-by: Tai Man Reviewed-by: Charlene Liu Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 2a5e21adc71b46beec9232cc6418676fd2255bc5 Author: SivapiriyanKumarasamy Date: Fri Jun 14 15:04:00 2019 -0400 drm/amd/display: Wait for backlight programming completion in set backlight level [ Upstream commit c7990daebe71d11a9e360b5c3b0ecd1846a3a4bb ] [WHY] Currently we don't wait for blacklight programming completion in DMCU when setting backlight level. Some sequences such as PSR static screen event trigger reprogramming requires it to be complete. [How] Add generic wait for dmcu command completion in set backlight level. Signed-off-by: SivapiriyanKumarasamy Reviewed-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 056af94d6e109852305043bca283c24b5d354153 Author: Mauro Carvalho Chehab Date: Sat Jul 13 08:50:24 2019 -0300 scripts/sphinx-pre-install: fix script for RHEL/CentOS [ Upstream commit b308467c916aa7acc5069802ab76a9f657434701 ] There's a missing parenthesis at the script, with causes it to fail to detect non-Fedora releases (e. g. RHEL/CentOS). Tested with Centos 7.6.1810. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 36b6458d8541d47a55b6aa20ac1792edf270410c Author: Laura Garcia Liebana Date: Mon Jul 15 13:23:37 2019 +0200 netfilter: nft_hash: fix symhash with modulus one [ Upstream commit 28b1d6ef53e3303b90ca8924bb78f31fa527cafb ] The rule below doesn't work as the kernel raises -ERANGE. nft add rule netdev nftlb lb01 ip daddr set \ symhash mod 1 map { 0 : 192.168.0.10 } fwd to "eth0" This patch allows to use the symhash modulus with one element, in the same way that the other types of hashes and algorithms that uses the modulus parameter. Signed-off-by: Laura Garcia Liebana Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 6f1d7f0d66899646ac50e717ca4cffd9c6c794ba Author: Florian Westphal Date: Fri Jul 12 00:29:05 2019 +0200 netfilter: conntrack: always store window size un-scaled [ Upstream commit 959b69ef57db00cb33e9c4777400ae7183ebddd3 ] Jakub Jankowski reported following oddity: After 3 way handshake completes, timeout of new connection is set to max_retrans (300s) instead of established (5 days). shortened excerpt from pcap provided: 25.070622 IP (flags [DF], proto TCP (6), length 52) 10.8.5.4.1025 > 10.8.1.2.80: Flags [S], seq 11, win 64240, [wscale 8] 26.070462 IP (flags [DF], proto TCP (6), length 48) 10.8.1.2.80 > 10.8.5.4.1025: Flags [S.], seq 82, ack 12, win 65535, [wscale 3] 27.070449 IP (flags [DF], proto TCP (6), length 40) 10.8.5.4.1025 > 10.8.1.2.80: Flags [.], ack 83, win 512, length 0 Turns out the last_win is of u16 type, but we store the scaled value: 512 << 8 (== 0x20000) becomes 0 window. The Fixes tag is not correct, as the bug has existed forever, but without that change all that this causes might cause is to mistake a window update (to-nonzero-from-zero) for a retransmit. Fixes: fbcd253d2448b8 ("netfilter: conntrack: lower timeout to RETRANS seconds if window is 0") Reported-by: Jakub Jankowski Tested-by: Jakub Jankowski Signed-off-by: Florian Westphal Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 307b6e5d90dc19cae65392ea8ad6152954e5e954 Author: Miaohe Lin Date: Tue Jul 2 03:59:36 2019 +0000 netfilter: Fix rpfilter dropping vrf packets by mistake [ Upstream commit b575b24b8eee37f10484e951b62ce2a31c579775 ] When firewalld is enabled with ipv4/ipv6 rpfilter, vrf ipv4/ipv6 packets will be dropped. Vrf device will pass through netfilter hook twice. One with enslaved device and another one with l3 master device. So in device may dismatch witch out device because out device is always enslaved device.So failed with the check of the rpfilter and drop the packets by mistake. Signed-off-by: Miaohe Lin Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 6f9dff8d1d581e776caeb4dae65453bda2eb9d92 Author: Farhan Ali Date: Thu Jul 11 10:28:53 2019 -0400 vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn [ Upstream commit c1ab69268d124ebdbb3864580808188ccd3ea355 ] So we don't call try to call vfio_unpin_pages() incorrectly. Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces") Signed-off-by: Farhan Ali Reviewed-by: Eric Farman Reviewed-by: Cornelia Huck Message-Id: <33a89467ad6369196ae6edf820cbcb1e2d8d050c.1562854091.git.alifm@linux.ibm.com> Signed-off-by: Cornelia Huck Signed-off-by: Sasha Levin commit bb312b4aa8b080b24a6ae190170d23304f6d0f56 Author: Florian Westphal Date: Tue Jul 2 21:41:40 2019 +0200 netfilter: nfnetlink: avoid deadlock due to synchronous request_module [ Upstream commit 1b0890cd60829bd51455dc5ad689ed58c4408227 ] Thomas and Juliana report a deadlock when running: (rmmod nf_conntrack_netlink/xfrm_user) conntrack -e NEW -E & modprobe -v xfrm_user They provided following analysis: conntrack -e NEW -E netlink_bind() netlink_lock_table() -> increases "nl_table_users" nfnetlink_bind() # does not unlock the table as it's locked by netlink_bind() __request_module() call_usermodehelper_exec() This triggers "modprobe nf_conntrack_netlink" from kernel, netlink_bind() won't return until modprobe process is done. "modprobe xfrm_user": xfrm_user_init() register_pernet_subsys() -> grab pernet_ops_rwsem .. netlink_table_grab() calls schedule() as "nl_table_users" is non-zero so modprobe is blocked because netlink_bind() increased nl_table_users while also holding pernet_ops_rwsem. "modprobe nf_conntrack_netlink" runs and inits nf_conntrack_netlink: ctnetlink_init() register_pernet_subsys() -> blocks on "pernet_ops_rwsem" thanks to xfrm_user module both modprobe processes wait on one another -- neither can make progress. Switch netlink_bind() to "nowait" modprobe -- this releases the netlink table lock, which then allows both modprobe instances to complete. Reported-by: Thomas Jarosch Reported-by: Juliana Rodrigueiro Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit f61c4d3a1f18caeda6997109175b628be793cca3 Author: Stephane Grosjean Date: Fri Jul 5 15:32:16 2019 +0200 can: peak_usb: fix potential double kfree_skb() commit fee6a8923ae0d318a7f7950c6c6c28a96cea099b upstream. When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Stephane Grosjean Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 0e9038a26c9b78da7fe6bb694c0104446581c05c Author: Nikita Yushchenko Date: Wed Jun 26 16:08:48 2019 +0300 can: rcar_canfd: fix possible IRQ storm on high load commit d4b890aec4bea7334ca2ca56fd3b12fb48a00cd1 upstream. We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by: Nikita Yushchenko Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 9479a058992355ad16551bb9e3ed1e90aa2b81ab Author: Guenter Roeck Date: Fri Aug 2 09:03:42 2019 -0700 usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests commit 88d02c9ba2e83fc22d37ccb1f11c62ea6fc9ae50 upstream. TCPM may receive PD messages associated with unknown or unsupported alternate modes. If that happens, calls to typec_match_altmode() will return NULL. The tcpm code does not currently take this into account. This results in crashes. Unable to handle kernel NULL pointer dereference at virtual address 000001f0 pgd = 41dad9a1 [000001f0] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 #6 Hardware name: Atmel SAMA5 Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm] PC is at typec_altmode_attention+0x0/0x14 LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm] ... [] (typec_altmode_attention) from [] (tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]) [] (tcpm_pd_rx_handler [tcpm]) from [] (process_one_work+0x123/0x2a8) [] (process_one_work) from [] (worker_thread+0xbd/0x3b0) [] (worker_thread) from [] (kthread+0xcf/0xf4) [] (kthread) from [] (ret_from_fork+0x11/0x38) Ignore PD messages if the associated alternate mode is not supported. Fixes: e9576fe8e605c ("usb: typec: tcpm: Support for Alternate Modes") Cc: stable Reported-by: Douglas Gilbert Cc: Douglas Gilbert Acked-by: Heikki Krogerus Tested-by: Douglas Gilbert Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman commit 3f524b631db72b78db88e19a8548c798ead3139e Author: Guenter Roeck Date: Wed Jul 24 07:38:32 2019 -0700 usb: typec: tcpm: Add NULL check before dereferencing config commit 1957de95d425d1c06560069dc7277a73a8b28683 upstream. When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110, the following crash is seen when writing into the 'preferred_role' sysfs attribute. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = f69149ad [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4 Hardware name: Atmel SAMA5 PC is at tcpm_try_role+0x3a/0x4c [tcpm] LR is at tcpm_try_role+0x15/0x4c [tcpm] pc : [] lr : [] psr: 60030033 sp : dc1a1e88 ip : c03fb47d fp : 00000000 r10: dc216190 r9 : dc1a1f78 r8 : 00000001 r7 : df4ae044 r6 : dd032e90 r5 : dd1ce340 r4 : df4ae054 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : df4ae044 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 50c53c7d Table: 3efec059 DAC: 00000051 Process bash (pid: 1882, stack limit = 0x6a6d4aa5) Stack: (0xdc1a1e88 to 0xdc1a2000) 1e80: dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000 [] (tcpm_try_role [tcpm]) from [] (preferred_role_store+0x2b/0x5c) [] (preferred_role_store) from [] (kernfs_fop_write+0xa7/0x150) [] (kernfs_fop_write) from [] (__vfs_write+0x1f/0x104) [] (__vfs_write) from [] (vfs_write+0x6b/0x104) [] (vfs_write) from [] (ksys_write+0x43/0x94) [] (ksys_write) from [] (ret_fast_syscall+0x1/0x62) Since commit 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties"), the 'config' pointer in struct tcpc_dev is optional when registering a Type-C port. Since it is optional, we have to check if it is NULL before dereferencing it. Reported-by: Douglas Gilbert Cc: Douglas Gilbert Fixes: 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties") Signed-off-by: Guenter Roeck Cc: stable Reviewed-by: Jun Li Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman commit bbc2e8206012504c9ba14fc9fd108a43a0d5201f Author: Li Jun Date: Wed Jul 17 16:06:46 2019 +0800 usb: typec: tcpm: remove tcpm dir if no children commit 12ca7297b8855c0af1848503d37196159b24e6b9 upstream. If config tcpm as module, module unload will not remove tcpm dir, then the next module load will have problem: the rootdir is NULL but tcpm dir is still there, so tcpm_debugfs_init() will create tcpm dir again with failure, fix it by remove the tcpm dir if no children. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190717080646.30421-2-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman commit 2ec5c9b785f4868cc94d30a28d55150f4c3bd39b Author: Li Jun Date: Wed Jul 17 16:06:45 2019 +0800 usb: typec: tcpm: free log buf memory when remove debug file commit fd5da3e2cc61b4a7c877172fdc9348c82cf6ccfc upstream. The logbuffer memory should be freed when remove debug file. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190717080646.30421-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman commit 33f2240acfa8b4017ee5dd64601c8a5ec7f53b4e Author: Suzuki K Poulose Date: Mon Aug 5 12:15:28 2019 +0100 usb: yurex: Fix use-after-free in yurex_delete commit fc05481b2fcabaaeccf63e32ac1baab54e5b6963 upstream. syzbot reported the following crash [0]: BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007 CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x413511 Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48 83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26 R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff Allocated by task 2776: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583 hub_port_connect drivers/usb/core/hub.c:5004 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 16007: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 device_release+0x71/0x200 drivers/base/core.c:1064 kobject_cleanup lib/kobject.c:693 [inline] kobject_release lib/kobject.c:722 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x171/0x280 lib/kobject.c:739 put_device+0x1b/0x30 drivers/base/core.c:2213 usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725 yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881b1859980 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 72 bytes inside of 2048-byte region [ffff8881b1859980, ffff8881b185a180) The buggy address belongs to the page: page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000 raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== A quick look at the yurex_delete() shows that we drop the reference to the usb_device before releasing any buffers associated with the device. Delay the reference drop until we have finished the cleanup. [0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/ Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: Jiri Kosina Cc: Tomoki Sekiyama Cc: Oliver Neukum Cc: andreyknvl@google.com Cc: gregkh@linuxfoundation.org Cc: Alan Stern Cc: syzkaller-bugs@googlegroups.com Cc: dtor@chromium.org Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com Signed-off-by: Suzuki K Poulose Cc: stable Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman commit 49888a4f0ebcc8de9023fd409f314f7ba7dfeb29 Author: Yoshihiro Shimoda Date: Fri Aug 2 17:33:35 2019 +0900 usb: host: xhci-rcar: Fix timeout in xhci_suspend() commit 783bda5e41acc71f98336e1a402c180f9748e5dc upstream. When a USB device is connected to the host controller and the system enters suspend, the following error happens in xhci_suspend(): xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout Since the firmware/internal CPU control the USBSTS.STS_HALT and the process speed is down when the roothub port enters U3, long delay for the handshake of STS_HALT is neeed in xhci_suspend(). So, this patch adds to set the XHCI_SLOW_SUSPEND. Fixes: 435cc1138ec9 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers") Cc: # v4.12+ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman commit 21344f0575f0ad63a7258c8addea9abbbc1a4dd6 Author: Andreas Gruenbacher Date: Mon Aug 5 12:22:03 2019 +0100 gfs2: gfs2_walk_metadata fix commit a27a0c9b6a208722016c8ec5ad31ec96082b91ec upstream. It turns out that the current version of gfs2_metadata_walker suffers from multiple problems that can cause gfs2_hole_size to report an incorrect size. This will confuse fiemap as well as lseek with the SEEK_DATA flag. Fix that by changing gfs2_hole_walker to compute the metapath to the first data block after the hole (if any), and compute the hole size based on that. Fixes xfstest generic/490. Signed-off-by: Andreas Gruenbacher Reviewed-by: Bob Peterson Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Greg Kroah-Hartman commit b674f7914a64efe9709c912911c72a700683424e Author: Nick Desaulniers Date: Wed Aug 7 15:15:33 2019 -0700 x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS commit b059f801a937d164e03b33c1848bb3dca67c0b04 upstream. KBUILD_CFLAGS is very carefully built up in the top level Makefile, particularly when cross compiling or using different build tools. Resetting KBUILD_CFLAGS via := assignment is an antipattern. The comment above the reset mentions that -pg is problematic. Other Makefiles use `CFLAGS_REMOVE_file.o = $(CC_FLAGS_FTRACE)` when CONFIG_FUNCTION_TRACER is set. Prefer that pattern to wiping out all of the important KBUILD_CFLAGS then manually having to re-add them. Seems also that __stack_chk_fail references are generated when using CONFIG_STACKPROTECTOR or CONFIG_STACKPROTECTOR_STRONG. Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality") Reported-by: Vaibhav Rustagi Suggested-by: Peter Zijlstra Suggested-by: Thomas Gleixner Signed-off-by: Nick Desaulniers Signed-off-by: Thomas Gleixner Tested-by: Vaibhav Rustagi Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190807221539.94583-2-ndesaulniers@google.com Signed-off-by: Greg Kroah-Hartman commit 0a9e41e27659430bf64828d7a7d8f57956bece08 Author: Thomas Richter Date: Wed Jul 24 14:27:02 2019 +0200 perf record: Fix module size on s390 commit 12a6d2940b5f02b4b9f71ce098e3bb02bc24a9ea upstream. On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by: Stefan Liebler Signed-off-by: Thomas Richter Acked-by: Heiko Carstens Cc: Hendrik Brueckner Cc: Vasily Gorbik Cc: stable@vger.kernel.org Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit f1f662894361e84fa60b80e9768194280816461c Author: Adrian Hunter Date: Thu Aug 8 09:48:23 2019 +0300 perf db-export: Fix thread__exec_comm() commit 3de7ae0b2a1d86dbb23d0cb135150534fdb2e836 upstream. Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter Cc: Jiri Olsa Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 532db2b9756a35672d2f8a582e4acf590d348b46 Author: Thomas Richter Date: Wed Jul 24 14:27:03 2019 +0200 perf annotate: Fix s390 gap between kernel end and module start commit b9c0a64901d5bdec6eafd38d1dc8fa0e2974fccb upstream. During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich Signed-off-by: Thomas Richter Acked-by: Heiko Carstens Cc: Hendrik Brueckner Cc: Vasily Gorbik Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 46b306f3cd7b47901382ca014eb1082b4b25db4a Author: Joerg Roedel Date: Fri Jul 19 20:46:52 2019 +0200 mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy() commit 3f8fd02b1bf1d7ba964485a56f2f4b53ae88c167 upstream. On x86-32 with PTI enabled, parts of the kernel page-tables are not shared between processes. This can cause mappings in the vmalloc/ioremap area to persist in some page-tables after the region is unmapped and released. When the region is re-used the processes with the old mappings do not fault in the new mappings but still access the old ones. This causes undefined behavior, in reality often data corruption, kernel oopses and panics and even spontaneous reboots. Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to all page-tables in the system before the regions can be re-used. References: https://bugzilla.suse.com/show_bug.cgi?id=1118689 Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by: Joerg Roedel Signed-off-by: Thomas Gleixner Reviewed-by: Dave Hansen Link: https://lkml.kernel.org/r/20190719184652.11391-4-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman commit 9935d7ed8406f62ae49a7ebf8109a81c704b2c1f Author: Joerg Roedel Date: Fri Jul 19 20:46:51 2019 +0200 x86/mm: Sync also unmappings in vmalloc_sync_all() commit 8e998fc24de47c55b47a887f6c95ab91acd4a720 upstream. With huge-page ioremap areas the unmappings also need to be synced between all page-tables. Otherwise it can cause data corruption when a region is unmapped and later re-used. Make the vmalloc_sync_one() function ready to sync unmappings and make sure vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD is found. Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by: Joerg Roedel Signed-off-by: Thomas Gleixner Reviewed-by: Dave Hansen Link: https://lkml.kernel.org/r/20190719184652.11391-3-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman commit dd524d488f5bd2cc6421f1b82e8e87c104ec51ad Author: Joerg Roedel Date: Fri Jul 19 20:46:50 2019 +0200 x86/mm: Check for pfn instead of page in vmalloc_sync_one() commit 51b75b5b563a2637f9d8dc5bd02a31b2ff9e5ea0 upstream. Do not require a struct page for the mapped memory location because it might not exist. This can happen when an ioremapped region is mapped with 2MB pages. Fixes: 5d72b4fba40ef ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by: Joerg Roedel Signed-off-by: Thomas Gleixner Reviewed-by: Dave Hansen Link: https://lkml.kernel.org/r/20190719184652.11391-2-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman commit b8a2169bcad849d595a8e5ac19d2df2e37a2d55c Author: Dmitry Torokhov Date: Fri Jul 12 11:37:17 2019 -0700 Input: synaptics - enable RMI mode for HP Spectre X360 commit 25f8c834e2a6871920cc1ca113f02fb301d007c3 upstream. The 2016 kabylake HP Spectre X360 (model number 13-w013dx) works much better with psmouse.synaptics_intertouch=1 kernel parameter, so let's enable RMI4 mode automatically. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204115 Reported-by: Nate Graham Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 3d180fe5cd7625b67e0879ffa1f6ae1f09385485 Author: Kai-Heng Feng Date: Mon Jul 22 10:56:55 2019 +0300 Input: elantech - enable SMBus on new (2018+) systems commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c upstream. There are some new HP laptops with Elantech touchpad that don't support multitouch. Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported, but in addition to firmware version, the bus type also informs us whether the IC can support SMBus. To avoid breaking old ICs, we will only enable SMbus support based the bus type on systems manufactured after 2018. Lastly, let's consolidate all checks into elantech_use_host_notify() and use it to determine whether to use PS/2 or SMBus. Signed-off-by: Kai-Heng Feng Acked-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit ce7d4fe4e52bf60bff9e70e977f3ead097a8854b Author: Oliver Neukum Date: Thu Aug 1 09:40:26 2019 -0700 Input: usbtouchscreen - initialize PM mutex before using it commit b55d996f057bf2e7ba9422a80b5e17e99860cb0b upstream. Mutexes shall be initialized before they are used. Fixes: 12e510dbc57b2 ("Input: usbtouchscreen - fix deadlock in autosuspend") Reported-by: syzbot+199ea16c7f26418b4365@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit c9a1c10487b988d664f318a69962ac71dba0db90 Author: Mikulas Patocka Date: Thu Aug 8 11:17:01 2019 -0400 loop: set PF_MEMALLOC_NOIO for the worker thread commit d0a255e795ab976481565f6ac178314b34fbf891 upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit d79d76f2bbb0cb20c467bd7dd86658f5e7724016 Author: Kevin Hao Date: Fri Jul 26 10:30:49 2019 +0800 mmc: cavium: Add the missing dma unmap when the dma has finished. commit b803974a86039913d5280add083d730b2b9ed8ec upstream. This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled. DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800] WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270 Modules linked in: CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO) pc : debug_dma_assert_idle+0x1f8/0x270 lr : debug_dma_assert_idle+0x1f8/0x270 sp : ffff0000113cfc10 x29: ffff0000113cfc10 x28: 0000ffff8c880000 x27: ffff800bc72a0000 x26: ffff000010ff8000 x25: ffff000010ff8940 x24: ffff000010ff8968 x23: 0000000000000000 x22: ffff000010e83700 x21: ffff000010ea2000 x20: ffff000010e835c8 x19: ffff800bc2c73300 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6d20616d64206576 x13: 69746361206e6120 x12: 676e696863756f74 x11: 20757063203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 3230303030303030 x7 : 00000000000002fd x6 : ffff000010fd57d0 x5 : 0000000000000000 x4 : ffff0000106c5210 x3 : 00000000ffffffff x2 : 0000800bee9c0000 x1 : 57d5843f4aa62800 x0 : 0000000000000000 Call trace: debug_dma_assert_idle+0x1f8/0x270 wp_page_copy+0xb0/0x688 do_wp_page+0xa8/0x5b8 __handle_mm_fault+0x600/0xd00 handle_mm_fault+0x118/0x1e8 do_page_fault+0x200/0x500 do_mem_abort+0x50/0xb0 el0_da+0x20/0x24 ---[ end trace a005534bd23e109f ]--- DMA-API: Mapped at: debug_dma_map_sg+0x94/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 Signed-off-by: Kevin Hao Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit fd3f902dd1d5e7021b46ecc1e38ed00c9fa0ba4b Author: Kevin Hao Date: Fri Jul 26 10:30:48 2019 +0800 mmc: cavium: Set the correct dma max segment size for mmc_host commit fa25eba6993b3750f417baabba169afaba076178 upstream. We have set the mmc_host.max_seg_size to 8M, but the dma max segment size of PCI device is set to 64K by default in function pci_device_add(). The mmc_host.max_seg_size is used to set the max segment size of the blk queue. Then this mismatch will trigger a calltrace like below when a bigger than 64K segment request arrives at mmc dev. So we should consider the limitation of the cvm_mmc_host when setting the mmc_host.max_seg_size. DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536] WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350 Modules linked in: CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62 Hardware name: Marvell OcteonTX CN96XX board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : debug_dma_map_sg+0x2b8/0x350 lr : debug_dma_map_sg+0x2b8/0x350 sp : ffff00001770f9e0 x29: ffff00001770f9e0 x28: ffffffff00000000 x27: 00000000ffffffff x26: ffff800bc2c73180 x25: ffff000010e83700 x24: 0000000000000002 x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 x20: ffff800bc48ba0b0 x19: ffff800bc97e8c00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6874207265676e6f x13: 6c20746e656d6765 x12: 7320677320676e69 x11: 7070616d203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 35363d78616d5b20 x7 : 00000000000002fd x6 : ffff000010fd57dc x5 : 0000000000000000 x4 : ffff0000106c61f0 x3 : 00000000ffffffff x2 : 0000800bee060000 x1 : 7010678df3041a00 x0 : 0000000000000000 Call trace: debug_dma_map_sg+0x2b8/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 mmc_mq_queue_rq+0x11c/0x278 blk_mq_dispatch_rq_list+0xb0/0x568 blk_mq_do_dispatch_sched+0x6c/0x108 blk_mq_sched_dispatch_requests+0x110/0x1b8 __blk_mq_run_hw_queue+0xb0/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x210/0x490 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Signed-off-by: Kevin Hao Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 9575ba61ba19edea77575c28bc2f6ff1f8145298 Author: Wenwen Wang Date: Thu Aug 8 00:15:21 2019 -0500 sound: fix a memory leak bug commit c7cd7c748a3250ca33509f9235efab9c803aca09 upstream. In sound_insert_unit(), the controlling structure 's' is allocated through kmalloc(). Then it is added to the sound driver list by invoking __sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is removed from the list through __sound_remove_unit(). If 'index' is not less than 0, -EBUSY is returned to indicate the error. However, 's' is not deallocated on this execution path, leading to a memory leak bug. To fix the above issue, free 's' before -EBUSY is returned. Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit d397091dbac0716645e0e5b090246337691d1d1e Author: Oliver Neukum Date: Thu Aug 8 11:27:28 2019 +0200 usb: iowarrior: fix deadlock on disconnect commit c468a8aa790e0dfe0a7f8a39db282d39c2c00b46 upstream. We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit b43611cd762c8b74b4ab4c714aa8de3beb08ff5c Author: Gavin Li Date: Sun Aug 4 16:50:44 2019 -0700 usb: usbfs: fix double-free of usb memory upon submiturb error commit c43f28dfdc4654e738aa6d3fd08a105b2bee758d upstream. Upon an error within proc_do_submiturb(), dec_usb_memory_use_count() gets called once by the error handling tail and again by free_async(). Remove the first call. Signed-off-by: Gavin Li Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.com Signed-off-by: Greg Kroah-Hartman commit 6dbc3b74daeb3475354cd135fcbfe14ae6abfe24 Author: Gary R Hook Date: Tue Jul 30 16:05:26 2019 +0000 crypto: ccp - Ignore tag length when decrypting GCM ciphertext commit e2664ecbb2f26225ac6646876f2899558ffb2604 upstream. AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only decrypt the ciphertext, and use the tag for comparison. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 30692edea30d633212e01f2378ac94d09c52f5d3 Author: Gary R Hook Date: Tue Jul 30 16:05:24 2019 +0000 crypto: ccp - Add support for valid authsize values less than 16 commit 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 upstream. AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes. Validate the requested authsize, and retain it to save in the request context. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 1c4393df3622d4a00aadff617b8fbcddc3c17204 Author: Gary R Hook Date: Tue Jul 30 16:05:22 2019 +0000 crypto: ccp - Fix oops by properly managing allocated structures commit 25e44338321af545ab34243a6081c3f0fc6107d0 upstream. A plaintext or ciphertext length of 0 is allowed in AES, in which case no encryption occurs. Ensure that we don't clean up data structures that were never allocated. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit b9de21575a20a1c252b820555433c48ae978e70d Author: Tetsuo Handa Date: Mon Jul 1 19:55:19 2019 +0900 staging: android: ion: Bail out upon SIGKILL when allocating memory. commit 8f9e86ee795971eabbf372e6d804d6b8578287a7 upstream. syzbot found that a thread can stall for minutes inside ion_system_heap_allocate() after that thread was killed by SIGKILL [1]. Let's check for SIGKILL before doing memory allocation. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e Signed-off-by: Tetsuo Handa Cc: stable Reported-by: syzbot Acked-by: Laura Abbott Acked-by: Sumit Semwal Link: https://lore.kernel.org/r/d088f188-5f32-d8fc-b9a0-0b404f7501cc@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman commit 6b8f93b5a4f78bed2bd8373987cf47614a415c45 Author: Ivan Bornyakov Date: Wed Jul 10 23:45:18 2019 +0300 staging: gasket: apex: fix copy-paste typo commit 66665bb9979246729562a09fcdbb101c83127989 upstream. In sysfs_show() case-branches ATTR_KERNEL_HIB_PAGE_TABLE_SIZE and ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE do the same. It looks like copy-paste mistake. Signed-off-by: Ivan Bornyakov Cc: stable Link: https://lore.kernel.org/r/20190710204518.16814-1-brnkv.i1@gmail.com Signed-off-by: Greg Kroah-Hartman commit fcab3783017779e1969c017b9a9bbbc605807e4a Author: Joe Perches Date: Tue Jul 9 22:04:17 2019 -0700 iio: adc: max9611: Fix misuse of GENMASK macro commit ae8cc91a7d85e018c0c267f580820b2bb558cd48 upstream. Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 805bd34ac2690ada3ea93407d95936190662bd32 Author: Gwendal Grignou Date: Fri Jun 28 12:17:09 2019 -0700 iio: cros_ec_accel_legacy: Fix incorrect channel setting commit 6cdff99c9f7d7d28b87cf05dd464f7c7736332ae upstream. INFO_SCALE is set both for each channel and all channels. iio is using all channel setting, so the error was not user visible. Signed-off-by: Gwendal Grignou Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman