commit 888315f9245fc72411e366d95aeace49aa796fd7 Author: Alexandre Frade Date: Wed Apr 29 15:20:43 2020 -0300 Linux 5.6.8-xanmod1 Signed-off-by: Alexandre Frade commit d75ebf99299856c0a76167b89414ecf5b9915508 Merge: da8d792bd197 63c3d4974107 Author: Alexandre Frade Date: Wed Apr 29 14:32:22 2020 -0300 Merge tag 'v5.6.8' into 5.6 This is the 5.6.8 stable release commit 63c3d497410788af1804579f0cded007318c5991 Author: Greg Kroah-Hartman Date: Wed Apr 29 16:34:58 2020 +0200 Linux 5.6.8 commit 8a0e9d7867f59ca8067775fdaddb49aec8353268 Author: Christian Borntraeger Date: Wed Apr 15 15:21:01 2020 +0200 s390/mm: fix page table upgrade vs 2ndary address mode accesses commit 316ec154810960052d4586b634156c54d0778f74 upstream. A page table upgrade in a kernel section that uses secondary address mode will mess up the kernel instructions as follows: Consider the following scenario: two threads are sharing memory. On CPU1 thread 1 does e.g. strnlen_user(). That gets to old_fs = enable_sacf_uaccess(); len = strnlen_user_srst(src, size); and " la %2,0(%1)\n" " la %3,0(%0,%1)\n" " slgr %0,%0\n" " sacf 256\n" "0: srst %3,%2\n" in strnlen_user_srst(). At that point we are in secondary space mode, control register 1 points to kernel page table and instruction fetching happens via c1, rather than usual c13. Interrupts are not disabled, for obvious reasons. On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table from 3-level to e.g. 4-level one. We'd allocated new top-level table, set it up and now we hit this: notify = 1; spin_unlock_bh(&mm->page_table_lock); } if (notify) on_each_cpu(__crst_table_upgrade, mm, 0); OK, we need to actually change over to use of new page table and we need that to happen in all threads that are currently running. Which happens to include the thread 1. IPI is delivered and we have static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; if (current->active_mm == mm) set_user_asce(mm); __tlb_flush_local(); } run on CPU1. That does static inline void set_user_asce(struct mm_struct *mm) { S390_lowcore.user_asce = mm->context.asce; OK, user page table address updated... __ctl_load(S390_lowcore.user_asce, 1, 1); ... and control register 1 set to it. clear_cpu_flag(CIF_ASCE_PRIMARY); } IPI is run in home space mode, so it's fine - insns are fetched using c13, which always points to kernel page table. But as soon as we return from the interrupt, previous PSW is restored, putting CPU1 back into secondary space mode, at which point we no longer get the kernel instructions from the kernel mapping. The fix is to only fixup the control registers that are currently in use for user processes during the page table update. We must also disable interrupts in enable_sacf_uaccess to synchronize the cr and thread.mm_segment updates against the on_each-cpu. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # 4.15+ Reported-by: Al Viro Reviewed-by: Gerald Schaefer References: CVE-2020-11884 Signed-off-by: Christian Borntraeger Signed-off-by: Greg Kroah-Hartman commit 509336e68db17298dd63cc3ce96494363af23e47 Author: Christophe Leroy Date: Fri Apr 17 11:58:36 2020 +0000 powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32 commit feb8e960d780e170e992a70491eec9dd68f4dbf2 upstream. CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32 which doesn't exists. Fixing it leads to a deadlock due to a vital register getting clobbered in _switch(). Change dependency to PPC32 and use r0 instead of r4 in _switch() Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman commit 5159d257b7a07b5adddd938c18df313a04c661d3 Author: Michael Ellerman Date: Sun Mar 1 22:17:38 2020 +1100 powerpc/kuap: PPC_KUAP_DEBUG should depend on PPC_KUAP commit 61da50b76b62fd815aa82d853bf82bf4f69568f5 upstream. Currently you can enable PPC_KUAP_DEBUG when PPC_KUAP is disabled, even though the former has not effect without the latter. Fix it so that PPC_KUAP_DEBUG can only be enabled when PPC_KUAP is enabled, not when the platform could support KUAP (PPC_HAVE_KUAP). Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200301111738.22497-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman commit e1a91532947b838525311bea83e01afcab1e8664 Author: Chris Wilson Date: Wed Apr 15 18:03:18 2020 +0100 drm/i915/gt: Update PMINTRMSK holding fw commit e1eb075c5051987fbbadbc0fb8211679df657721 upstream. If we use a non-forcewaked write to PMINTRMSK, it does not take effect until much later, if at all, causing a loss of RPS interrupts and no GPU reclocking, leaving the GPU running at the wrong frequency for long periods of time. Reported-by: Francisco Jerez Suggested-by: Francisco Jerez Fixes: 35cc7f32c298 ("drm/i915/gt: Use non-forcewake writes for RPS") Signed-off-by: Chris Wilson Cc: Francisco Jerez Cc: Mika Kuoppala Cc: Andi Shyti Reviewed-by: Mika Kuoppala Reviewed-by: Andi Shyti Reviewed-by: Francisco Jerez Cc: # v5.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-2-chris@chris-wilson.co.uk (cherry picked from commit a080bd994c4023042a2b605c65fa10a25933f636) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman commit 29772eb399a39a5de4c7528683b2be58e0e20f8f Author: Michal Simek Date: Fri Apr 3 11:24:36 2020 +0200 Revert "serial: uartps: Register own uart console and driver structures" commit 18cc7ac8a28e28cd005c2475f52576cfe10cabfb upstream. This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit ec37770e030a75e00e759b6c7100499eaa30581d Author: Michal Simek Date: Fri Apr 3 11:24:35 2020 +0200 Revert "serial: uartps: Move Port ID to device data structure" commit 492cc08bc16c44e2e587362ada3f6269dee2be22 upstream. This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit f1a2c6402d088e36344d57207ede0893901c6a99 Author: Michal Simek Date: Fri Apr 3 11:24:34 2020 +0200 Revert "serial: uartps: Change uart ID port allocation" commit 72d68197281e2ad313960504d10b0c41ff87fd55 upstream. This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade. With setting up NR_PORTS to 16 to be able to use serial2 and higher aliases and don't loose functionality which was intended by these changes. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit cd7189b8647c91be26722f5c5b8040a9e1b09b9a Author: Michal Simek Date: Fri Apr 3 11:24:33 2020 +0200 Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES" commit 91c9dfa25c7f95b543c280e0edf1fd8de6e90985 upstream. This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit f6537fd98c5f507375374adc7120baa5ce7d6df0 Author: Michal Simek Date: Fri Apr 3 11:24:32 2020 +0200 Revert "serial: uartps: Fix error path when alloc failed" commit b6fd2dbbd649b89a3998528994665ded1e3fbf7f upstream. This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit 291ee7b416872ad4dcf41a1ffa677cb025780d68 Author: Michal Simek Date: Fri Apr 3 11:24:31 2020 +0200 Revert "serial: uartps: Use the same dynamic major number for all ports" commit 8da1a3940da4b0e82848ec29b835486890bc9232 upstream. This reverts commit ab262666018de6f4e206b021386b93ed0c164316. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit 416c20d18d2168bac6ad427c2877c602663a1fdd Author: Michal Simek Date: Fri Apr 3 11:24:30 2020 +0200 Revert "serial: uartps: Fix uartps_major handling" commit 2e01911b7cf7aa07a304a809eca1b11a4bd35859 upstream. This reverts commit 5e9bd2d70ae7c00a95a22994abf1eef728649e64. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold Signed-off-by: Michal Simek Cc: stable Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman commit 7b6b887323e8e26a353050388aaf938848edc866 Author: Kazuhiro Fujita Date: Fri Mar 27 18:17:28 2020 +0000 serial: sh-sci: Make sure status register SCxSR is read in correct sequence commit 3dc4db3662366306e54ddcbda4804acb1258e4ba upstream. For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: Signed-off-by: Kazuhiro Fujita Signed-off-by: Hao Bui Signed-off-by: KAZUMI HARADA Signed-off-by: Lad Prabhakar Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1585333048-31828-1-git-send-email-kazuhiro.fujita.jg@renesas.com Signed-off-by: Greg Kroah-Hartman commit 63ef955ff5e4c3fddfb0356fc01843706f61c88a Author: Mathias Nyman Date: Tue Apr 21 17:08:22 2020 +0300 xhci: Don't clear hub TT buffer on ep0 protocol stall commit 8f97250c21f0cf36434bf5b7ddf4377406534cd1 upstream. The default control endpoint ep0 can return a STALL indicating the device does not support the control transfer requests. This is called a protocol stall and does not halt the endpoint. xHC behaves a bit different. Its internal endpoint state will always be halted on any stall, even if the device side of the endpiont is not halted. So we do need to issue the reset endpoint command to clear the xHC host intenal endpoint halt state, but should not request the HS hub to clear the TT buffer unless device side of endpoint is halted. Clearing the hub TT buffer at protocol stall caused ep0 to become unresponsive for some FS/LS devices behind HS hubs, and class drivers failed to set the interface due to timeout: usb 1-2.1: 1:1: usb_set_interface failed (-110) Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") Cc: # v5.3 Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200421140822.28233-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit d67175a220e194c2fbd53013c6d2acd175ad063b Author: Mathias Nyman Date: Tue Apr 21 17:08:21 2020 +0300 xhci: prevent bus suspend if a roothub port detected a over-current condition commit e9fb08d617bfae5471d902112667d0eeb9dee3c4 upstream. Suspending the bus and host controller while a port is in a over-current condition may halt the host. Also keep the roothub running if over-current is active. Cc: Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200421140822.28233-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit ce08e3298bba3f09e0d033608317b83a4d7565ce Author: Mathias Nyman Date: Tue Apr 21 17:08:20 2020 +0300 xhci: Fix handling halted endpoint even if endpoint ring appears empty commit 93ceaa808e8defc67ebca1396e2f42f812a2efc0 upstream. If a class driver cancels its only URB then the endpoint ring buffer will appear empty to the xhci driver. xHC hardware may still process cached TRBs, and complete with a STALL, halting the endpoint. This halted endpoint was not handled correctly by xhci driver as events on empty rings were all assumed to be spurious events. xhci driver refused to restart the ring with EP_HALTED flag set, so class driver was never informed the endpoint halted even if it queued new URBs. The host side of the endpoint needs to be reset, and dequeue pointer should be moved in order to clear the cached TRBs and resetart the endpoint. Small adjustments in finding the new dequeue pointer are needed to support the case of stall on an empty ring and unknown current TD. Cc: cc: Jeremy Compostella Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200421140822.28233-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit e959a881af6e5e245aec20db99dd00bc6d78dea6 Author: Naoki Kiryu Date: Wed Apr 22 16:43:45 2020 +0200 usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer commit 0df9433fcae02215c8fd79690c134d535c7bb905 upstream. Before this commit, typec_altmode_get_partner would return a const struct typec_altmode * pointing to address 0x08 when to_altmode(adev)->partner was NULL. Add a check for to_altmode(adev)->partner being NULL to fix this. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1785972 Fixes: 5f54a85db5df ("usb: typec: Make sure an alt mode exist before getting its partner") Cc: stable@vger.kernel.org Signed-off-by: Naoki Kiryu Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200422144345.43262-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman commit 2fe89ee818223d74f021531bbce84983a8de84fb Author: Badhri Jagan Sridharan Date: Thu Apr 2 14:59:47 2020 -0700 usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change commit 901789745a053286e0ced37960d44fa60267b940 upstream. After PORT_RESET, the port is set to the appropriate default_state. Ignore processing CC changes here as this could cause the port to be switched into sink states by default. echo source > /sys/class/typec/port0/port_type Before: [ 154.528547] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [ 154.528560] CC1: 0 -> 0, CC2: 3 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 154.528564] state change PORT_RESET -> SNK_UNATTACHED After: [ 151.068814] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [ 151.072440] CC1: 3 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 151.172117] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 151.172136] pending state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED @ 870 ms [rev3 NONE_AMS] [ 152.060106] state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED [delayed 870 ms] [ 152.060118] Start toggling Signed-off-by: Badhri Jagan Sridharan Cc: stable Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200402215947.176577-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman commit 308293dd89c456f9590f219376d48d2f4d31b75d Author: Udipto Goswami Date: Thu Apr 2 10:15:21 2020 +0530 usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset() commit 1c2e54fbf1da5e5445a0ab132c862b02ccd8d230 upstream. For userspace functions using OS Descriptors, if a function also supplies Extended Property descriptors currently the counts and lengths stored in the ms_os_descs_ext_prop_{count,name_len,data_len} variables are not getting reset to 0 during an unbind or when the epfiles are closed. If the same function is re-bound and the descriptors are re-written, this results in those count/length variables to monotonically increase causing the VLA allocation in _ffs_func_bind() to grow larger and larger at each bind/unbind cycle and eventually fail to allocate. Fix this by clearing the ms_os_descs_ext_prop count & lengths to 0 in ffs_data_reset(). Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Signed-off-by: Udipto Goswami Signed-off-by: Sriharsha Allenki Reviewed-by: Manu Gautam Link: https://lore.kernel.org/r/20200402044521.9312-1-sallenki@codeaurora.org Signed-off-by: Greg Kroah-Hartman commit 42014687c0474ca61b08cea777beb01d1405ec66 Author: Thinh Nguyen Date: Tue Mar 31 01:40:35 2020 -0700 usb: dwc3: gadget: Fix request completion check commit 49e0590e3a60e75b493e5df879e216e5073c7663 upstream. A request may not be completed because not all the TRBs are prepared for it. This happens when we run out of available TRBs. When some TRBs are completed, the driver needs to prepare the rest of the TRBs for the request. The check dwc3_gadget_ep_request_completed() shouldn't be checking the amount of data received but rather the number of pending TRBs. Revise this request completion check. Cc: stable@vger.kernel.org Fixes: e0c42ce590fe ("usb: dwc3: gadget: simplify IOC handling") Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman commit 6cdec58746be690d6792d31b5c67578890fae2ed Author: Xu Yilun Date: Tue Feb 25 14:07:18 2020 +0800 fpga: dfl: pci: fix return value of cci_pci_sriov_configure commit 3c2760b78f90db874401d97e3c17829e2e36f400 upstream. pci_driver.sriov_configure should return negative value on error and number of enabled VFs on success. But now the driver returns 0 on success. The sriov configure still works but will cause a warning message: XX VFs requested; only 0 enabled This patch changes the return value accordingly. Cc: stable@vger.kernel.org Signed-off-by: Xu Yilun Signed-off-by: Wu Hao Signed-off-by: Moritz Fischer Signed-off-by: Greg Kroah-Hartman commit 0d6fa4b8d522bdc0475c6f69699cd3cc8b43bdfb Author: Oliver Neukum Date: Wed Apr 15 16:17:50 2020 +0200 UAS: fix deadlock in error handling and PM flushing work commit f6cc6093a729ede1ff5658b493237c42b82ba107 upstream. A SCSI error handler and block runtime PM must not allocate memory with GFP_KERNEL. Furthermore they must not wait for tasks allocating memory with GFP_KERNEL. That means that they cannot share a workqueue with arbitrary tasks. Fix this for UAS using a private workqueue. Signed-off-by: Oliver Neukum Fixes: f9dc024a2da1f ("uas: pre_reset and suspend: Fix a few races") Cc: stable Link: https://lore.kernel.org/r/20200415141750.811-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 19d5427c5e72bf43806289c1d6fe50d9fbe7c4ee Author: Oliver Neukum Date: Wed Apr 15 16:17:49 2020 +0200 UAS: no use logging any details in case of ENODEV commit 5963dec98dc52d52476390485f07a29c30c6a582 upstream. Once a device is gone, the internal state does not matter anymore. There is no need to spam the logs. Signed-off-by: Oliver Neukum Cc: stable Fixes: 326349f824619 ("uas: add dead request list") Link: https://lore.kernel.org/r/20200415141750.811-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit b6b492d46a2eeb710427fd968cc74a013dab92ca Author: Oliver Neukum Date: Wed Apr 15 17:13:58 2020 +0200 cdc-acm: introduce a cool down commit a4e7279cd1d19f48f0af2a10ed020febaa9ac092 upstream. Immediate submission in case of a babbling device can lead to a busy loop. Introducing a delayed work. Signed-off-by: Oliver Neukum Cc: stable Tested-by: Jonas Karlsson Link: https://lore.kernel.org/r/20200415151358.32664-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 9d76d7a8e9e0aa93b1d02aa240c2300615184553 Author: Oliver Neukum Date: Wed Apr 15 17:13:57 2020 +0200 cdc-acm: close race betrween suspend() and acm_softint commit 0afccd7601514c4b83d8cc58c740089cc447051d upstream. Suspend increments a counter, then kills the URBs, then kills the scheduled work. The scheduled work, however, may reschedule the URBs. Fix this by having the work check the counter. Signed-off-by: Oliver Neukum Cc: stable Tested-by: Jonas Karlsson Link: https://lore.kernel.org/r/20200415151358.32664-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 7db83c2abf2a7bd0f4551c523003ce752724c68b Author: Benjamin Lee Date: Fri Apr 17 11:45:38 2020 -0700 mei: me: fix irq number stored in hw struct commit fec874a81b3ec280b91034d892a432fc71fd1522 upstream. Commit 261b3e1f2a01 ("mei: me: store irq number in the hw struct.") stores the irq number in the hw struct before MSI is enabled. This caused a regression for mei_me_synchronize_irq() waiting for the wrong irq number. On my laptop this causes a hang on shutdown. Fix the issue by storing the irq number after enabling MSI. Fixes: 261b3e1f2a01 ("mei: me: store irq number in the hw struct.") Signed-off-by: Benjamin Lee Cc: stable Link: https://lore.kernel.org/r/20200417184538.349550-1-ben@b1c1l1.com Signed-off-by: Greg Kroah-Hartman commit fbca60c3db3d2c2b843c4c9797315ab8a8777221 Author: Malcolm Priestley Date: Tue Apr 14 11:39:23 2020 +0100 staging: vt6656: Power save stop wake_up_count wrap around. commit ea81c3486442f4643fc9825a2bb1b430b829bccd upstream. conf.listen_interval can sometimes be zero causing wake_up_count to wrap around up to many beacons too late causing CTRL-EVENT-BEACON-LOSS as in. wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ] Fixes: 43c93d9bf5e2 ("staging: vt6656: implement power saving code.") Cc: stable Signed-off-by: Malcolm Priestley Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.com Signed-off-by: Greg Kroah-Hartman commit ae6d71d2dbca05055d313166cfa7d7a1b1d7a36c Author: Malcolm Priestley Date: Sat Apr 18 22:01:49 2020 +0100 staging: vt6656: Fix pairwise key entry save. commit 0b59f10b1d8fe8d50944f21f5d403df9303095a8 upstream. The problem is that the group key was saved as VNT_KEY_DEFAULTKEY was over written by the VNT_KEY_GROUP_ADDRESS index. mac80211 could not clear the mac_addr in the default key. The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as VNT_KEY_GROUP_ADDRESS. mac80211 can clear any key using vnt_mac_disable_keyentry. Fixes: f9ef05ce13e4 ("staging: vt6656: Fix pairwise key for non station modes") Cc: stable Signed-off-by: Malcolm Priestley Link: https://lore.kernel.org/r/da2f7e7f-1658-1320-6eee-0f55770ca391@gmail.com Signed-off-by: Greg Kroah-Hartman commit 9072c3ad9bfccaa49236dc84117ab8da0b531577 Author: Malcolm Priestley Date: Sat Apr 18 17:43:24 2020 +0100 staging: vt6656: Fix drivers TBTT timing counter. commit 09057742af98a39ebffa27fac4f889dc873132de upstream. The drivers TBTT counter is not synchronized with mac80211 timestamp. Reorder the functions and use vnt_update_next_tbtt to do the final synchronize. Fixes: c15158797df6 ("staging: vt6656: implement TSF counter") Cc: stable Signed-off-by: Malcolm Priestley Link: https://lore.kernel.org/r/375d0b25-e8bc-c8f7-9b10-6cc705d486ee@gmail.com Signed-off-by: Greg Kroah-Hartman commit e4dafc8d3f95c5e24ca3df038dc739d3a18d22d4 Author: Malcolm Priestley Date: Sat Apr 18 18:37:18 2020 +0100 staging: vt6656: Fix calling conditions of vnt_set_bss_mode commit 664ba5180234593b4b8517530e8198bf2f7359e2 upstream. vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES, BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode. Fixes an issue that preamble mode is not being updated correctly. Fixes: c12603576e06 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.") Cc: stable Signed-off-by: Malcolm Priestley Link: https://lore.kernel.org/r/44110801-6234-50d8-c583-9388f04b486c@gmail.com Signed-off-by: Greg Kroah-Hartman commit 7ca806773ec866a9255ebd58f3c164834315c5e9 Author: Malcolm Priestley Date: Sat Apr 18 17:24:50 2020 +0100 staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. commit 0f8240bfc070033a4823b19883efd3d38c7735cc upstream. mac80211/users control whether multicast is on or off don't enable it by default. Fixes an issue when multicast/broadcast is always on allowing other beacons through in power save. Fixes: db8f37fa3355 ("staging: vt6656: mac80211 conversion: main_usb add functions...") Cc: stable Signed-off-by: Malcolm Priestley Link: https://lore.kernel.org/r/2c24c33d-68c4-f343-bd62-105422418eac@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit ec6e885a4cb0b49759e5dbc7e5f1b9f11a55d48c Author: Nicolas Pitre Date: Sat Mar 28 22:25:11 2020 -0400 vt: don't use kmalloc() for the unicode screen buffer commit 9a98e7a80f95378c9ee0c644705e3b5aa54745f1 upstream. Even if the actual screen size is bounded in vc_do_resize(), the unicode buffer is still a little more than twice the size of the glyph buffer and may exceed MAX_ORDER down the kmalloc() path. This can be triggered from user space. Since there is no point having a physically contiguous buffer here, let's avoid the above issue as well as reducing pressure on high order allocations by using vmalloc() instead. Signed-off-by: Nicolas Pitre Cc: Acked-by: Sam Ravnborg Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003282214210.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman commit 7a87c58cee848258032740d71d166a0d69f9778c Author: Nicolas Pitre Date: Sat Mar 28 17:32:42 2020 -0400 vt: don't hardcode the mem allocation upper bound commit 2717769e204e83e65b8819c5e2ef3e5b6639b270 upstream. The code in vc_do_resize() bounds the memory allocation size to avoid exceeding MAX_ORDER down the kzalloc() call chain and generating a runtime warning triggerable from user space. However, not only is it unwise to use a literal value here, but MAX_ORDER may also be configurable based on CONFIG_FORCE_MAX_ZONEORDER. Let's use KMALLOC_MAX_SIZE instead. Note that prior commit bb1107f7c605 ("mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value could not be relied upon. Signed-off-by: Nicolas Pitre Cc: # v4.10+ Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003281702410.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman commit fb814f0762fad5bab77ecf8e6416be501174f4ee Author: Xiyu Yang Date: Mon Apr 20 13:44:16 2020 +0800 staging: comedi: Fix comedi_device refcnt leak in comedi_open commit 332e0e17ad49e084b7db670ef43b5eb59abd9e34 upstream. comedi_open() invokes comedi_dev_get_from_minor(), which returns a reference of the COMEDI device to "dev" with increased refcount. When comedi_open() returns, "dev" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of comedi_open(). When "cfp" allocation is failed, the refcnt increased by comedi_dev_get_from_minor() is not decreased, causing a refcnt leak. Fix this issue by calling comedi_dev_put() on this error path when "cfp" allocation is failed. Fixes: 20f083c07565 ("staging: comedi: prepare support for per-file read and write subdevices") Signed-off-by: Xiyu Yang Cc: stable Signed-off-by: Xin Tan Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/1587361459-83622-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 40459402b01c22e91a39ae0f910c6765ed20c45d Author: Ian Abbott Date: Mon Apr 6 15:20:15 2020 +0100 staging: comedi: dt2815: fix writing hi byte of analog output commit ed87d33ddbcd9a1c3b5ae87995da34e6f51a862c upstream. The DT2815 analog output command is 16 bits wide, consisting of the 12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1, and a voltage or current selector in bit 0. Both bytes of the 16-bit command need to be written in turn to a single 8-bit data register. However, the driver currently only writes the low 8-bits. It is broken and appears to have always been broken. Electronic copies of the DT2815 User's Manual seem impossible to find online, but looking at the source code, a best guess for the sequence the driver intended to use to write the analog output command is as follows: 1. Wait for the status register to read 0x00. 2. Write the low byte of the command to the data register. 3. Wait for the status register to read 0x80. 4. Write the high byte of the command to the data register. Step 4 is missing from the driver. Add step 4 to (hopefully) fix the driver. Also add a "FIXME" comment about setting bit 0 of the low byte of the command. Supposedly, it is used to choose between voltage output and current output, but the current driver always sets it to 1. Signed-off-by: Ian Abbott Cc: stable Link: https://lore.kernel.org/r/20200406142015.126982-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 7390d23c58042ced4086e8111b2c758498f5896d Author: Chris Packham Date: Fri Apr 17 10:19:08 2020 +1200 powerpc/setup_64: Set cache-line-size based on cache-block-size commit 94c0b013c98583614e1ad911e8795ca36da34a85 upstream. If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use the block-size value for both. Per the devicetree spec cache-line-size is only needed if it differs from the block size. Originally the code would fallback from block size to line size. An error message was printed if both properties were missing. Later the code was refactored to use clearer names and logic but it inadvertently made line size a required property, meaning on systems without a line size property we fall back to the default from the cputable. On powernv (OPAL) platforms, since the introduction of device tree CPU features (5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")), that has led to the wrong value being used, as the fallback value is incorrect for Power8/Power9 CPUs. The incorrect values flow through to the VDSO and also to the sysconf values, SC_LEVEL1_ICACHE_LINESIZE etc. Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Chris Packham Reported-by: Qian Cai [mpe: Add even more detail to change log] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman commit c35223e4769ca107f4c4c1c2bba02f38a6863ff6 Author: Christophe Leroy Date: Mon Apr 20 05:37:42 2020 +0000 powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure commit b61c38baa98056d4802ff5be5cfb979efc2d0f7a upstream. WRITE_RO lkdtm test works. But when selecting CONFIG_DEBUG_RODATA_TEST, the kernel reports rodata_test: test data was not read only This is because when rodata test runs, there are still old entries in TLB. Flush TLB after setting kernel pages RO or NX. Fixes: d5f17ee96447 ("powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/485caac75f195f18c11eb077b0031fdd2bb7fb9e.1587361039.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman commit a64ebe4e73da9d1985f3c4a5120c6ab8feb7c6a7 Author: Ahmad Fatoum Date: Mon Mar 23 09:19:33 2020 +0100 ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y commit f1baca8896ae18e12c45552a4c4ae2086aa7e02c upstream. 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by: Clemens Gruber Signed-off-by: Ahmad Fatoum Tested-by: Roland Hieber Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman commit 4bd8ebef9c90f40519deb2f4f23772c6e88a8ec5 Author: Paulo Alcantara Date: Mon Apr 20 23:44:24 2020 -0300 cifs: fix uninitialised lease_key in open_shroot() commit 0fe0781f29dd8ab618999e6bda33c782ebbdb109 upstream. SMB2_open_init() expects a pre-initialised lease_key when opening a file with a lease, so set pfid->lease_key prior to calling it in open_shroot(). This issue was observed when performing some DFS failover tests and the lease key was never randomly generated. Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Reviewed-by: Ronnie Sahlberg Reviewed-by: Aurelien Aptel CC: Stable Signed-off-by: Greg Kroah-Hartman commit 650d07d9945c69f6d7b2354e9d12498a4ee45b13 Author: Luca Coelho Date: Fri Apr 17 13:37:11 2020 +0300 iwlwifi: fix WGDS check when WRDS is disabled commit 1edd56e69dca9098e63d8d5815aeb83eeeb10a79 upstream. In the reference BIOS implementation, WRDS can be disabled without disabling WGDS. And this happens in most cases where WRDS is disabled, causing the WGDS without WRDS check and issue an error. To avoid this issue, we change the check so that we only considered it an error if the WRDS entry doesn't exist. If the entry (or the selected profile is disabled for any other reason), we just silently ignore WGDS. Cc: stable@vger.kernel.org # 4.14+ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205513 Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417133700.72ad25c3998b.I875d935cefd595ed7f640ddcfc7bc802627d2b7f@changeid Signed-off-by: Greg Kroah-Hartman commit 8680c9e8215e4ea496912590a3fbd49641d356c7 Author: Johannes Berg Date: Fri Apr 17 10:08:14 2020 +0300 iwlwifi: mvm: fix inactive TID removal return value usage commit e6d419f943318e2b903e380dfd52a8dda6db3021 upstream. The function iwl_mvm_remove_inactive_tids() returns bool, so we should just check "if (ret)", not "if (ret >= 0)" (which would do nothing useful here). We obviously therefore cannot use the return value of the function for the free_queue, we need to use the queue (i) we're currently dealing with instead. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417100405.9d862ed72535.I9e27ccc3ee3c8855fc13682592b571581925dfbd@changeid Signed-off-by: Greg Kroah-Hartman commit cf9dcf1be6e5fe3dc0157354d416c33cd6a8b656 Author: Ilan Peer Date: Fri Apr 17 10:08:13 2020 +0300 iwlwifi: mvm: Do not declare support for ACK Enabled Aggregation commit 38af8d5a90a8c3b41ff0484855e24bd55b43ce9d upstream. As this was not supposed to be enabled to begin with. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417100405.53dbc3c6c36b.Idfe118546b92cc31548b2211472a5303c7de5909@changeid Signed-off-by: Greg Kroah-Hartman commit c69805ad265c8ce776297054133e31a3f73590d7 Author: Johannes Berg Date: Fri Apr 17 10:08:12 2020 +0300 iwlwifi: mvm: limit maximum queue appropriately commit e5b72e3bc4763152e24bf4b8333bae21cc526c56 upstream. Due to some hardware issues, queue 31 isn't usable on devices that have 32 queues (7000, 8000, 9000 families), which is correctly reflected in the configuration and TX queue initialization. However, the firmware API and queue allocation code assumes that there are 32 queues, and if something actually attempts to use #31 this leads to a NULL-pointer dereference since it's not allocated. Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also add some code to catch this earlier in the future, if the configuration changes perhaps. Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid Signed-off-by: Greg Kroah-Hartman commit 3b7e9ffeeef2709ea731bf9554b8ba5d402ef208 Author: Johannes Berg Date: Fri Apr 17 10:08:11 2020 +0300 iwlwifi: pcie: indicate correct RB size to device commit d8d663970234fe885f29edf4f06394d0928c89f4 upstream. In the context info, we need to indicate the correct RB size to the device so that it will not think we have 4k when we only use 2k. This seems to not have caused any issues right now, likely because the hardware no longer supports putting multiple entries into a single RB, and practically all of the entries should be smaller than 2k. Nevertheless, it's a bug, and we must advertise the right size to the device. Note that right now we can only tell it 2k vs. 4k, so for the cases where we have more, still use 4k. This needs to be fixed by the firmware first. Signed-off-by: Johannes Berg Fixes: cfdc20efebdc ("iwlwifi: pcie: use partial pages if applicable") Cc: stable@vger.kernel.org # v5.6 Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417100405.ae6cd345764f.I0985c55223decf70182b9ef1d8edf4179f537853@changeid Signed-off-by: Greg Kroah-Hartman commit 6470df29778f1a235a8a6f7c6f678066b1d311b1 Author: Mordechay Goodstein Date: Fri Apr 17 10:08:10 2020 +0300 iwlwifi: mvm: beacon statistics shouldn't go backwards commit 290d5e4951832e39d10f4184610dbf09038f8483 upstream. We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mordechay Goodstein Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid Signed-off-by: Greg Kroah-Hartman commit 1a119a47df5668a4e08462b4a2eed658846df86d Author: Johannes Berg Date: Fri Apr 17 10:08:09 2020 +0300 iwlwifi: pcie: actually release queue memory in TVQM commit b98b33d5560a2d940f3b80f6768a6177bf3dfbc0 upstream. The iwl_trans_pcie_dyn_txq_free() function only releases the frames that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(), but doesn't actually free the DMA ring or byte-count tables for the queue. This leads to pretty large memory leaks (at least before my queue size improvements), in particular in monitor/sniffer mode on channel hopping since this happens on every channel change. This was also now more evident after the move to a DMA pool for the byte count tables, showing messages such as BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown() This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811. Signed-off-by: Johannes Berg Fixes: 6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/iwlwifi.20200417100405.f5f4c4193ec1.Id5feebc9b4318041913a9c89fc1378bb5454292c@changeid Signed-off-by: Greg Kroah-Hartman commit 81c3889708e58e0858f2d04d85d4e93c79a8b0aa Author: Chuck Lever Date: Fri Apr 17 12:40:31 2020 -0400 SUNRPC: Fix backchannel RPC soft lockups commit 6221f1d9b63fed6260273e59a2b89ab30537a811 upstream. Currently, after the forward channel connection goes away, backchannel operations are causing soft lockups on the server because call_transmit_status's SOFTCONN logic ignores ENOTCONN. Such backchannel Calls are aggressively retried until the client reconnects. Backchannel Calls should use RPC_TASK_NOCONNECT rather than RPC_TASK_SOFTCONN. If there is no forward connection, the server is not capable of establishing a connection back to the client, thus that backchannel request should fail before the server attempts to send it. Commit 58255a4e3ce5 ("NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN") was merged several years before RPC_TASK_NOCONNECT was available. Because setup_callback_client() explicitly sets NOPING, the NFSv4.0 callback connection depends on the first callback RPC to initiate a connection to the client. Thus NFSv4.0 needs to continue to use RPC_TASK_SOFTCONN. Suggested-by: Trond Myklebust Signed-off-by: Chuck Lever Cc: # v4.20+ Signed-off-by: Greg Kroah-Hartman commit 6459116d566106ca095e0107576e887a7e3dd254 Author: Gyeongtaek Lee Date: Sat Apr 18 13:13:20 2020 +0900 ASoC: dapm: fixup dapm kcontrol widget commit ebf1474745b4373fdde0fcf32d9d1f369b50b212 upstream. snd_soc_dapm_kcontrol widget which is created by autodisable control should contain correct on_val, mask and shift because it is set when the widget is powered and changed value is applied on registers by following code in dapm_seq_run_coalesced(). mask |= w->mask << w->shift; if (w->power) value |= w->on_val << w->shift; else value |= w->off_val << w->shift; Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent double shift. And, on_val in dapm_kcontrol_set_value() is modified to get correct value in the dapm_seq_run_coalesced(). Signed-off-by: Gyeongtaek Lee Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 00f8710ed2c56a61f3c3bc07cfec77acf9b3da70 Author: Paul Moore Date: Mon Apr 20 16:24:34 2020 -0400 audit: check the length of userspace generated audit records commit 763dafc520add02a1f4639b500c509acc0ea8e5b upstream. Commit 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: stable@vger.kernel.org Fixes: 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: syzbot+49e69b4d71a420ceda3e@syzkaller.appspotmail.com Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit a21902847b83ba7b612a765d836f3ae08801060e Author: Mikita Lipski Date: Tue Apr 7 12:07:17 2020 -0400 drm/dp_mst: Zero assigned PBN when releasing VCPI slots commit 7bfc1fec1af3e2f0194843855b0d49054fa42fd2 upstream. Zero Port's PBN together with VCPI slots when releasing allocated VCPI slots. That way when disabling the connector it will not cause issues in drm_dp_mst_atomic_check verifying branch bw limit. Signed-off-by: Mikita Lipski Signed-off-by: Lyude Paul Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: # v5.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20200407160717.27976-1-mikita.lipski@amd.com Signed-off-by: Greg Kroah-Hartman commit ac6c14f8574afbeb95e4563f9f87fdcbbf54349c Author: Eric W. Biederman Date: Mon Apr 20 11:41:50 2020 -0500 signal: Avoid corrupting si_pid and si_uid in do_notify_parent commit 61e713bdca3678e84815f2427f7a063fc353a1fc upstream. Christof Meerwald writes: > Hi, > > this is probably related to commit > 7a0cf094944e2540758b7f957eb6846d5126f535 (signal: Correct namespace > fixups of si_pid and si_uid). > > With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a > properly set si_pid field - this seems to happen for multi-threaded > child processes. > > A simple test program (based on the sample from the signalfd man page): > > #include > #include > #include > #include > #include > #include > > #define handle_error(msg) \ > do { perror(msg); exit(EXIT_FAILURE); } while (0) > > int main(int argc, char *argv[]) > { > sigset_t mask; > int sfd; > struct signalfd_siginfo fdsi; > ssize_t s; > > sigemptyset(&mask); > sigaddset(&mask, SIGCHLD); > > if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1) > handle_error("sigprocmask"); > > pid_t chldpid; > char *chldargv[] = { "./sfdclient", NULL }; > posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL); > > sfd = signalfd(-1, &mask, 0); > if (sfd == -1) > handle_error("signalfd"); > > for (;;) { > s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo)); > if (s != sizeof(struct signalfd_siginfo)) > handle_error("read"); > > if (fdsi.ssi_signo == SIGCHLD) { > printf("Got SIGCHLD %d %d %d %d\n", > fdsi.ssi_status, fdsi.ssi_code, > fdsi.ssi_uid, fdsi.ssi_pid); > return 0; > } else { > printf("Read unexpected signal\n"); > } > } > } > > > and a multi-threaded client to test with: > > #include > #include > > void *f(void *arg) > { > sleep(100); > } > > int main() > { > pthread_t t[8]; > > for (int i = 0; i != 8; ++i) > { > pthread_create(&t[i], NULL, f, NULL); > } > } > > I tried to do a bit of debugging and what seems to be happening is > that > > /* From an ancestor pid namespace? */ > if (!task_pid_nr_ns(current, task_active_pid_ns(t))) { > > fails inside task_pid_nr_ns because the check for "pid_alive" fails. > > This code seems to be called from do_notify_parent and there we > actually have "tsk != current" (I am assuming both are threads of the > current process?) I instrumented the code with a warning and received the following backtrace: > WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15 > Modules linked in: > CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924 > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 > RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15 > Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd > RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046 > RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29 > RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001 > R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140 > FS: 0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0 > Call Trace: > send_signal+0x1c8/0x310 > do_notify_parent+0x50f/0x550 > release_task.part.21+0x4fd/0x620 > do_exit+0x6f6/0xaf0 > do_group_exit+0x42/0xb0 > get_signal+0x13b/0xbb0 > do_signal+0x2b/0x670 > ? __audit_syscall_exit+0x24d/0x2b0 > ? rcu_read_lock_sched_held+0x4d/0x60 > ? kfree+0x24c/0x2b0 > do_syscall_64+0x176/0x640 > ? trace_hardirqs_off_thunk+0x1a/0x1c > entry_SYSCALL_64_after_hwframe+0x49/0xb3 The immediate problem is as Christof noticed that "pid_alive(current) == false". This happens because do_notify_parent is called from the last thread to exit in a process after that thread has been reaped. The bigger issue is that do_notify_parent can be called from any process that manages to wait on a thread of a multi-threaded process from wait_task_zombie. So any logic based upon current for do_notify_parent is just nonsense, as current can be pretty much anything. So change do_notify_parent to call __send_signal directly. Inspecting the code it appears this problem has existed since the pid namespace support started handling this case in 2.6.30. This fix only backports to 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid") where the problem logic was moved out of __send_signal and into send_signal. Cc: stable@vger.kernel.org Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Ref: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals") Link: https://lore.kernel.org/lkml/20200419201336.GI22017@edge.cmeerw.net/ Reported-by: Christof Meerwald Acked-by: Oleg Nesterov Acked-by: Christian Brauner Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman commit 08d981a65d9901727611e9a67997920a9990d132 Author: Alan Stern Date: Wed Apr 22 16:14:57 2020 -0400 usb-storage: Add unusual_devs entry for JMicron JMS566 commit 94f9c8c3c404ee1f7aaff81ad4f24aec4e34a78b upstream. Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails to handle WRITE commands with the FUA bit set, even though it claims to support FUA. (Oddly enough, a later version of the same bridge, version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also oddly, the bridge _does_ support FUA when using the UAS transport instead of the Bulk-Only transport -- but this device was blacklisted for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") for apparently unrelated reasons.) This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA flag. This allows the bridge to work properly with usb-storage. Reported-and-tested-by: Cyril Roelandt Signed-off-by: Alan Stern CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221613110.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman commit 16f5788d6f7ed29c584ecd8671dadc5cbed6c1e2 Author: Jiri Slaby Date: Fri Apr 17 12:59:59 2020 +0200 tty: rocket, avoid OOB access commit 7127d24372bf23675a36edc64d092dc7fd92ebe8 upstream. init_r_port can access pc104 array out of bounds. pc104 is a 2D array defined to have 4 members. Each member has 8 submembers. * we can have more than 4 (PCI) boards, i.e. [board] can be OOB * line is not modulo-ed by anything, so the first line on the second board can be 4, on the 3rd 12 or alike (depending on previously registered boards). It's zero only on the first line of the first board. So even [line] can be OOB, quite soon (with the 2nd registered board already). This code is broken for ages, so just avoid the OOB accesses and don't try to fix it as we would need to find out the correct line number. Use the default: RS232, if we are out. Generally, if anyone needs to set the interface types, a module parameter is past the last thing that should be used for this purpose. The parameters' description says it's for ISA cards anyway. Signed-off-by: Jiri Slaby Cc: stable Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/20200417105959.15201-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 8e8fb10143d2881b6eae27f551e304f8469560e5 Author: Andrew Melnychenko Date: Tue Apr 14 22:15:03 2020 +0300 tty: hvc: fix buffer overflow during hvc_alloc(). commit 9a9fc42b86c06120744555fea43fdcabe297c656 upstream. If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by: Andrew Melnychenko Cc: stable Link: https://lore.kernel.org/r/20200414191503.3471783-1-andrew@daynix.com Signed-off-by: Greg Kroah-Hartman commit 97f922cb916f6a7c800ae53201304fa4af08dfac Author: Uros Bizjak Date: Tue Apr 14 09:14:14 2020 +0200 KVM: VMX: Enable machine check support for 32bit targets commit fb56baae5ea509e63c2a068d66a4d8ea91969fca upstream. There is no reason to limit the use of do_machine_check to 64bit targets. MCE handling works for both target familes. Cc: Paolo Bonzini Cc: Sean Christopherson Cc: stable@vger.kernel.org Fixes: a0861c02a981 ("KVM: Add VT-x machine check support") Signed-off-by: Uros Bizjak Message-Id: <20200414071414.45636-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 80aca27ad896354fb2edf991beb2d8ef477767de Author: Sean Christopherson Date: Tue Apr 7 23:40:58 2020 -0700 KVM: Check validity of resolved slot when searching memslots commit b6467ab142b708dd076f6186ca274f14af379c72 upstream. Check that the resolved slot (somewhat confusingly named 'start') is a valid/allocated slot before doing the final comparison to see if the specified gfn resides in the associated slot. The resolved slot can be invalid if the binary search loop terminated because the search index was incremented beyond the number of used slots. This bug has existed since the binary search algorithm was introduced, but went unnoticed because KVM statically allocated memory for the max number of slots, i.e. the access would only be truly out-of-bounds if all possible slots were allocated and the specified gfn was less than the base of the lowest memslot. Commit 36947254e5f98 ("KVM: Dynamically size memslot array based on number of used slots") eliminated the "all possible slots allocated" condition and made the bug embarrasingly easy to hit. Fixes: 9c1a5d38780e6 ("kvm: optimize GFN to memslot lookup with large slots amount") Reported-by: syzbot+d889b59b2bb87d4047a2@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20200408064059.8957-2-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit d44d6a7409870acb793f60362e28921b210dab60 Author: Sean Christopherson Date: Tue Apr 7 23:40:59 2020 -0700 KVM: s390: Return last valid slot if approx index is out-of-bounds commit 97daa028f3f621adff2c4f7b15fe0874e5b5bd6c upstream. Return the index of the last valid slot from gfn_to_memslot_approx() if its binary search loop yielded an out-of-bounds index. The index can be out-of-bounds if the specified gfn is less than the base of the lowest memslot (which is also the last valid memslot). Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is non-zero. Fixes: afdad61615cc3 ("KVM: s390: Fix storage attributes migration with memory slots") Cc: stable@vger.kernel.org # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots Cc: stable@vger.kernel.org # 4.19.x Signed-off-by: Sean Christopherson Message-Id: <20200408064059.8957-3-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 456245a1b326912c37e61d0193464f53effce3ff Author: George Wilson Date: Thu Mar 19 23:27:58 2020 -0400 tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send() commit eba5cf3dcb844c82f54d4a857e124824e252206d upstream. tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The "partner partition suspended" transport event disables the associated CRQ such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.' This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and retries the ibmvtpm_send_crq() once. Cc: stable@vger.kernel.org # 3.7.x Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Reported-by: Linh Pham Reviewed-by: Stefan Berger Signed-off-by: George Wilson Tested-by: Linh Pham Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 74a6b8631ba8f9e5f223fd25271aee9290be5da1 Author: Tianjia Zhang Date: Tue Apr 14 19:42:26 2020 +0800 tpm: fix wrong return value in tpm_pcr_extend commit 29cb79795e324a8b65e7891d76f8f6ca911ba440 upstream. For the algorithm that does not match the bank, a positive value EINVAL is returned here. I think this is a typo error. It is necessary to return an error value. Cc: stable@vger.kernel.org # 5.4.x Fixes: 9f75c8224631 ("KEYS: trusted: correctly initialize digests and fix locking issue") Signed-off-by: Tianjia Zhang Reviewed-by: Roberto Sassu Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 23c580ff12cf719e95538547d57409f41f953e26 Author: Jarkko Sakkinen Date: Sun Apr 12 20:04:12 2020 +0300 tpm/tpm_tis: Free IRQ if probing fails commit b160c94be5d2816b62c8ac338605668304242959 upstream. Call disable_interrupts() if we have to revert to polling in order not to unnecessarily reserve the IRQ for the life-cycle of the driver. Cc: stable@vger.kernel.org # 4.5.x Reported-by: Hans de Goede Fixes: e3837e74a06d ("tpm_tis: Refactor the interrupt setup") Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 82143593f399f4e5a45380b2dcf1f7fe0ee52c55 Author: Alexander Tsoy Date: Sat Apr 18 20:58:15 2020 +0300 ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices commit 1c826792586f526a5a5cd21d55aad388f5bb0b23 upstream. Many Focusrite devices supports a limited set of sample rates per altsetting. These includes audio interfaces with ADAT ports: - Scarlett 18i6, 18i8 1st gen, 18i20 1st gen; - Scarlett 18i8 2nd gen, 18i20 2nd gen; - Scarlett 18i8 3rd gen, 18i20 3rd gen; - Clarett 2Pre USB, 4Pre USB, 8Pre USB. Maximum rate is exposed in the last 4 bytes of Format Type descriptor which has a non-standard bLength = 10. Tested-by: Alexey Skobkin Signed-off-by: Alexander Tsoy Cc: Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@tsoy.me Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit acb4f2944a157f541dd45e492beb665782056ef6 Author: Xiyu Yang Date: Thu Apr 23 12:54:19 2020 +0800 ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif commit 59e1947ca09ebd1cae147c08c7c41f3141233c84 upstream. snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which increases the refcount of the snd_usb_audio object "chip". When snd_microii_spdif_default_get() returns, local variable "chip" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in several exception handling paths of snd_microii_spdif_default_get(). When those error scenarios occur such as usb_ifnum_to_if() returns NULL, the function forgets to decrease the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak. Fix this issue by jumping to "end" label when those error scenarios occur. Fixes: 447d6275f0c2 ("ALSA: usb-audio: Add sanity checks for endpoint accesses") Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Cc: Link: https://lore.kernel.org/r/1587617711-13200-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit cbcfa11f3f79634433e2e58a19a27335e301a956 Author: Takashi Iwai Date: Wed Apr 15 18:25:23 2020 +0200 ALSA: hda/hdmi: Add module option to disable audio component binding commit b392350ec3f229ad9603d3816f753479e441d99a upstream. As the recent regression showed, we want sometimes to turn off the audio component binding just for debugging. This patch adds the module option to control it easily without compilation. Fixes: ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223 Cc: Link: https://lore.kernel.org/r/20200415162523.27499-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit c7fa616e8a674c339f78eac33185617c40c4e40c Author: Kailang Yang Date: Thu Apr 23 14:18:31 2020 +0800 ALSA: hda/realtek - Add new codec supported for ALC245 commit 7fbdcd8301a84c09cebfa64f1317a6dafeec9188 upstream. Enable new codec supported for ALC245. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/8c0804738b2c42439f59c39c8437817f@realtek.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4608795e074212478daa70744621dbf35317e6cf Author: Takashi Iwai Date: Sat Apr 18 21:06:39 2020 +0200 ALSA: hda/realtek - Fix unexpected init_amp override commit 67791202c5e069cf2ba51db0718d56c634709e78 upstream. The commit 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection") changed the way to assign spec->init_amp field that specifies the way to initialize the amp. Along with the change, the commit also replaced a few fixups that set spec->init_amp in HDA_FIXUP_ACT_PROBE with HDA_FIXUP_ACT_PRE_PROBE. This was rather aligning to the other fixups, and not supposed to change the actual behavior. However, this change turned out to cause a regression on FSC S7020, which hit exactly the above. The reason was that there is still one place that overrides spec->init_amp after HDA_FIXUP_ACT_PRE_PROBE call, namely in alc_ssid_check(). This patch fixes the regression by adding the proper spec->init_amp override check, i.e. verifying whether it's still ALC_INIT_UNDEFINED. Fixes: 1c76aa5fb48d ("ALSA: hda/realtek - Allow skipping spec->init_amp detection") Cc: BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207329 Link: https://lore.kernel.org/r/20200418190639.10082-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a93b23a19ff9922b60daf4476f7b1f8c1e867417 Author: Takashi Iwai Date: Mon Apr 20 09:55:29 2020 +0200 ALSA: usx2y: Fix potential NULL dereference commit 7686e3485253635c529cdd5f416fc640abaf076f upstream. The error handling code in usX2Y_rate_set() may hit a potential NULL dereference when an error occurs before allocating all us->urb[]. Add a proper NULL check for fixing the corner case. Reported-by: Lin Yi Cc: Link: https://lore.kernel.org/r/20200420075529.27203-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 1b9862583ed11ca937fd0f7d97cc797d4196c064 Author: Lucas Stach Date: Mon Apr 20 18:14:23 2020 -0700 tools/vm: fix cross-compile build commit cf01699ee220c38099eb3e43ce3d10690c8b7060 upstream. Commit 7ed1c1901fe5 ("tools: fix cross-compile var clobbering") moved the setup of the CC variable to tools/scripts/Makefile.include to make the behavior consistent across all the tools Makefiles. As the vm tools missed the include we end up with the wrong CC in a cross-compiling evironment. Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering) Signed-off-by: Lucas Stach Signed-off-by: Andrew Morton Cc: Martin Kelly Cc: Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit ec5b222c83ce34e905c9832bbaf5548303209c4a Author: Muchun Song Date: Mon Apr 20 18:14:04 2020 -0700 mm/ksm: fix NULL pointer dereference when KSM zero page is enabled commit 56df70a63ed5d989c1d36deee94cae14342be6e9 upstream. find_mergeable_vma() can return NULL. In this case, it leads to a crash when we access vm_mm(its offset is 0x40) later in write_protect_page. And this case did happen on our server. The following call trace is captured in kernel 4.19 with the following patch applied and KSM zero page enabled on our server. commit e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring") So add a vma check to fix it. BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 Oops: 0000 [#1] SMP NOPTI CPU: 9 PID: 510 Comm: ksmd Kdump: loaded Tainted: G OE 4.19.36.bsk.9-amd64 #4.19.36.bsk.9 RIP: try_to_merge_one_page+0xc7/0x760 Code: 24 58 65 48 33 34 25 28 00 00 00 89 e8 0f 85 a3 06 00 00 48 83 c4 60 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b 46 08 a8 01 75 b8 <49> 8b 44 24 40 4c 8d 7c 24 20 b9 07 00 00 00 4c 89 e6 4c 89 ff 48 RSP: 0018:ffffadbdd9fffdb0 EFLAGS: 00010246 RAX: ffffda83ffd4be08 RBX: ffffda83ffd4be40 RCX: 0000002c6e800000 RDX: 0000000000000000 RSI: ffffda83ffd4be40 RDI: 0000000000000000 RBP: ffffa11939f02ec0 R08: 0000000094e1a447 R09: 00000000abe76577 R10: 0000000000000962 R11: 0000000000004e6a R12: 0000000000000000 R13: ffffda83b1e06380 R14: ffffa18f31f072c0 R15: ffffda83ffd4be40 FS: 0000000000000000(0000) GS:ffffa0da43b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 0000002c77c0a003 CR4: 00000000007626e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ksm_scan_thread+0x115e/0x1960 kthread+0xf5/0x130 ret_from_fork+0x1f/0x30 [songmuchun@bytedance.com: if the vma is out of date, just exit] Link: http://lkml.kernel.org/r/20200416025034.29780-1-songmuchun@bytedance.com [akpm@linux-foundation.org: add the conventional braces, replace /** with /*] Fixes: e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring") Co-developed-by: Xiongchun Duan Signed-off-by: Muchun Song Signed-off-by: Andrew Morton Reviewed-by: David Hildenbrand Reviewed-by: Kirill Tkhai Cc: Hugh Dickins Cc: Yang Shi Cc: Claudio Imbrenda Cc: Markus Elfring Cc: Link: http://lkml.kernel.org/r/20200416025034.29780-1-songmuchun@bytedance.com Link: http://lkml.kernel.org/r/20200414132905.83819-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit b82f3df00c7b93e76f5fc2e9abd022ef5108cab0 Author: Longpeng Date: Mon Apr 20 18:13:51 2020 -0700 mm/hugetlb: fix a addressing exception caused by huge_pte_offset commit 3c1d7e6ccb644d517a12f73a7ff200870926f865 upstream. Our machine encountered a panic(addressing exception) after run for a long time and the calltrace is: RIP: hugetlb_fault+0x307/0xbe0 RSP: 0018:ffff9567fc27f808 EFLAGS: 00010286 RAX: e800c03ff1258d48 RBX: ffffd3bb003b69c0 RCX: e800c03ff1258d48 RDX: 17ff3fc00eda72b7 RSI: 00003ffffffff000 RDI: e800c03ff1258d48 RBP: ffff9567fc27f8c8 R08: e800c03ff1258d48 R09: 0000000000000080 R10: ffffaba0704c22a8 R11: 0000000000000001 R12: ffff95c87b4b60d8 R13: 00005fff00000000 R14: 0000000000000000 R15: ffff9567face8074 FS: 00007fe2d9ffb700(0000) GS:ffff956900e40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffd3bb003b69c0 CR3: 000000be67374000 CR4: 00000000003627e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: follow_hugetlb_page+0x175/0x540 __get_user_pages+0x2a0/0x7e0 __get_user_pages_unlocked+0x15d/0x210 __gfn_to_pfn_memslot+0x3c5/0x460 [kvm] try_async_pf+0x6e/0x2a0 [kvm] tdp_page_fault+0x151/0x2d0 [kvm] ... kvm_arch_vcpu_ioctl_run+0x330/0x490 [kvm] kvm_vcpu_ioctl+0x309/0x6d0 [kvm] do_vfs_ioctl+0x3f0/0x540 SyS_ioctl+0xa1/0xc0 system_call_fastpath+0x22/0x27 For 1G hugepages, huge_pte_offset() wants to return NULL or pudp, but it may return a wrong 'pmdp' if there is a race. Please look at the following code snippet: ... pud = pud_offset(p4d, addr); if (sz != PUD_SIZE && pud_none(*pud)) return NULL; /* hugepage or swap? */ if (pud_huge(*pud) || !pud_present(*pud)) return (pte_t *)pud; pmd = pmd_offset(pud, addr); if (sz != PMD_SIZE && pmd_none(*pmd)) return NULL; /* hugepage or swap? */ if (pmd_huge(*pmd) || !pmd_present(*pmd)) return (pte_t *)pmd; ... The following sequence would trigger this bug: - CPU0: sz = PUD_SIZE and *pud = 0 , continue - CPU0: "pud_huge(*pud)" is false - CPU1: calling hugetlb_no_page and set *pud to xxxx8e7(PRESENT) - CPU0: "!pud_present(*pud)" is false, continue - CPU0: pmd = pmd_offset(pud, addr) and maybe return a wrong pmdp However, we want CPU0 to return NULL or pudp in this case. We must make sure there is exactly one dereference of pud and pmd. Signed-off-by: Longpeng Signed-off-by: Andrew Morton Reviewed-by: Mike Kravetz Reviewed-by: Jason Gunthorpe Cc: Matthew Wilcox Cc: Sean Christopherson Cc: Link: http://lkml.kernel.org/r/20200413010342.771-1-longpeng2@huawei.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit d5da0e07176f032042cc2c05dbeedef3af60c72d Author: Sudip Mukherjee Date: Mon Apr 20 18:14:20 2020 -0700 coredump: fix null pointer dereference on coredump commit db973a7289dad24e6c017dcedc6aee886579dc3a upstream. If the core_pattern is set to "|" and any process segfaults then we get a null pointer derefernce while trying to coredump. The call stack shows: RIP: do_coredump+0x628/0x11c0 When the core_pattern has only "|" there is no use of trying the coredump and we can check that while formating the corename and exit with an error. After this change I get: format_corename failed Aborting core Fixes: 315c69261dd3 ("coredump: split pipe command whitespace before expanding template") Reported-by: Matthew Ruffell Signed-off-by: Sudip Mukherjee Signed-off-by: Andrew Morton Cc: Paul Wise Cc: Alexander Viro Cc: Neil Horman Cc: Link: http://lkml.kernel.org/r/20200416194612.21418-1-sudipm.mukherjee@gmail.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 276da144ca4d49df8d04430f01cacdbf558fd71a Author: Luis Mendes Date: Fri Apr 3 16:15:34 2020 +0100 staging: gasket: Fix incongruency in handling of sysfs entries creation commit 9195d762042b0e5e4ded63606b4b30a93cba4400 upstream. Fix incongruency in handling of sysfs entries creation. This issue could cause invalid memory accesses, by not properly detecting the end of the sysfs attributes array. Fixes: 84c45d5f3bf1 ("staging: gasket: Replace macro __ATTR with __ATTR_NULL") Signed-off-by: Luis Mendes Cc: stable Link: https://lore.kernel.org/r/20200403151534.20753-1-luis.p.mendes@gmail.com Signed-off-by: Greg Kroah-Hartman commit cc2b011002e954c2ee6384c1f85565e7bc459727 Author: Jann Horn Date: Mon Apr 20 18:14:11 2020 -0700 vmalloc: fix remap_vmalloc_range() bounds checks commit bdebd6a2831b6fab69eb85cee74a8ba77f1a1cc2 upstream. remap_vmalloc_range() has had various issues with the bounds checks it promises to perform ("This function checks that addr is a valid vmalloc'ed area, and that it is big enough to cover the vma") over time, e.g.: - not detecting pgoff< Signed-off-by: Andrew Morton Cc: stable@vger.kernel.org Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Martin KaFai Lau Cc: Song Liu Cc: Yonghong Song Cc: Andrii Nakryiko Cc: John Fastabend Cc: KP Singh Link: http://lkml.kernel.org/r/20200415222312.236431-1-jannh@google.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit c61bfde10fe3f2ae1be3de7b6da913f304da9221 Author: Amit Singh Tomar Date: Fri Apr 17 01:41:57 2020 +0530 tty: serial: owl: add "much needed" clk_prepare_enable() commit abf42d2f333b21bf8d33b2fbb8a85fa62037ac01 upstream. commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the fact that generic clk routine clk_disable_unused() disables the gate clks, and that in turns disables OWL UART (but UART driver never enables it). To prove this theory, Andre suggested to use "clk_ignore_unused" in kernel commnd line and it worked (Kernel happily lands into RAMFS world :)). This commit fix this up by adding clk_prepare_enable(). Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") Signed-off-by: Amit Singh Tomar Cc: stable Link: https://lore.kernel.org/r/1587067917-1400-1-git-send-email-amittomer25@gmail.com Signed-off-by: Greg Kroah-Hartman commit f8092b0e021762ab73656d6ec87a6c9e90aff4f4 Author: Alan Stern Date: Wed Apr 22 16:13:08 2020 -0400 USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") commit 3155f4f40811c5d7e3c686215051acf504e05565 upstream. Commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") changed the way the hub driver enumerates high-speed devices. Instead of using the "new" enumeration scheme first and switching to the "old" scheme if that doesn't work, we start with the "old" scheme. In theory this is better because the "old" scheme is slightly faster -- it involves resetting the device only once instead of twice. However, for a long time Windows used only the "new" scheme. Zeng Tao said that Windows 8 and later use the "old" scheme for high-speed devices, but apparently there are some devices that don't like it. William Bader reports that the Ricoh webcam built into his Sony Vaio laptop not only doesn't enumerate under the "old" scheme, it gets hung up so badly that it won't then enumerate under the "new" scheme! Only a cold reset will fix it. Therefore we will revert the commit and go back to trying the "new" scheme first for high-speed devices. Reported-and-tested-by: William Bader Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207219 Signed-off-by: Alan Stern Fixes: bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") CC: Zeng Tao CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221611230.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman commit b6acca76cd242da9d479e58515299674875768e5 Author: Alan Stern Date: Wed Apr 22 16:09:51 2020 -0400 USB: hub: Fix handling of connect changes during sleep commit 9f952e26295d977dbfc6fedeaf8c4f112c818d37 upstream. Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") wasn't very well conceived. The problem it tried to fix was that if a connect-change event occurred while the system was asleep (such as a device disconnecting itself from the bus when it is suspended and then reconnecting when it resumes) requiring a reset-resume during the system wakeup transition, the hub port's change_bit entry would remain set afterward. This would cause the hub driver to believe another connect-change event had occurred after the reset-resume, which was wrong and would lead the driver to send unnecessary requests to the device (which could interfere with a firmware update). The commit tried to fix this by not setting the change_bit during the wakeup. But this was the wrong thing to do; it means that when a device is unplugged while the system is asleep, the hub driver doesn't realize anything has happened: The change_bit flag which would tell it to handle the disconnect event is clear. The commit needs to be reverted and the problem fixed in a different way. Fortunately an alternative solution was noted in the commit's Changelog: We can continue to set the change_bit entry in hub_activate() but then clear it when a reset-resume occurs. That way the the hub driver will see the change_bit when a device is disconnected but won't see it when the device is still present. That's what this patch does. Reported-and-tested-by: Peter Chen Signed-off-by: Alan Stern Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") Tested-by: Paul Zimmerman CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221602480.11262-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman commit 00305f23aa666c814710d67631babb3300ce16c6 Author: Alan Stern Date: Sat Mar 28 16:18:11 2020 -0400 USB: core: Fix free-while-in-use bug in the USB S-Glibrary commit 056ad39ee9253873522f6469c3364964a322912b upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern Reported-and-tested-by: Kyungtae Kim CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org Signed-off-by: Greg Kroah-Hartman commit 9775d6c38dd60444748ff8e910c8da9b051cff94 Author: Jann Horn Date: Wed Apr 1 09:46:19 2020 +0200 USB: early: Handle AMD's spec-compliant identifiers, too commit 7dbdb53d72a51cea9b921d9dbba54be00752212a upstream. This fixes a bug that causes the USB3 early console to freeze after printing a single line on AMD machines because it can't parse the Transfer TRB properly. The spec at https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf says in section "4.5.1 Device Context Index" that the Context Index, also known as Endpoint ID according to section "1.6 Terms and Abbreviations", is normally computed as `DCI = (Endpoint Number * 2) + Direction`, which matches the current definitions of XDBC_EPID_OUT and XDBC_EPID_IN. However, the numbering in a Debug Capability Context data structure is supposed to be different: Section "7.6.3.2 Endpoint Contexts and Transfer Rings" explains that a Debug Capability Context data structure has the endpoints mapped to indices 0 and 1. Change XDBC_EPID_OUT/XDBC_EPID_IN to the spec-compliant values, add XDBC_EPID_OUT_INTEL/XDBC_EPID_IN_INTEL with Intel's incorrect values, and let xdbc_handle_tx_event() handle both. I have verified that with this patch applied, the USB3 early console works on both an Intel and an AMD machine. Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Link: https://lore.kernel.org/r/20200401074619.8024-1-jannh@google.com Signed-off-by: Greg Kroah-Hartman commit 5e109f92fce61775075687b43161632c1c31dd7d Author: Jonathan Cox Date: Fri Apr 10 14:24:27 2020 -0700 USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE commit be34a5854b4606bd7a160ad3cb43415d623596c7 upstream. The Corsair K70 RGB RAPIDFIRE needs the USB_QUIRK_DELAY_INIT and USB_QUIRK_DELAY_CTRL_MSG to function or it will randomly not respond on boot, just like other Corsair keyboards Signed-off-by: Jonathan Cox Cc: stable Link: https://lore.kernel.org/r/20200410212427.2886-1-jonathan@jdcox.net Signed-off-by: Greg Kroah-Hartman commit 1c182dd06925fa32d512d9b714374f3eff39bdfa Author: Changming Liu Date: Mon Apr 20 23:41:25 2020 -0400 USB: sisusbvga: Change port variable from signed to unsigned commit 2df7405f79ce1674d73c2786fe1a8727c905d65b upstream. Change a bunch of arguments of wrapper functions which pass signed integer to an unsigned integer which might cause undefined behaviors when sign integer overflow. Signed-off-by: Changming Liu Cc: stable Link: https://lore.kernel.org/r/BL0PR06MB45482D71EA822D75A0E60A2EE5D50@BL0PR06MB4548.namprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman commit 236924c833838be10ed18e460e6e01f520fc7666 Author: Lars-Peter Clausen Date: Fri Apr 3 15:27:16 2020 +0200 iio: xilinx-xadc: Make sure not exceed maximum samplerate commit 3b7f9dbb827ce8680b98490215e698b6079a9ec5 upstream. The XADC supports a samplerate of up to 1MSPS. Unfortunately the hardware does not have a FIFO, which means it generates an interrupt for each conversion sequence. At one 1MSPS this creates an interrupt storm that causes the system to soft-lock. For this reason the driver limits the maximum samplerate to 150kSPS. Currently this check is only done when setting a new samplerate. But it is also possible that the initial samplerate configured in the FPGA bitstream exceeds the limit. In this case when starting to capture data without first changing the samplerate the system can overload. To prevent this check the currently configured samplerate in the probe function and reduce it to the maximum if necessary. Signed-off-by: Lars-Peter Clausen Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 9458267b369c71ca474f646d11010ed50d0d75ab Author: Lars-Peter Clausen Date: Fri Apr 3 15:27:15 2020 +0200 iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode commit 8bef455c8b1694547ee59e8b1939205ed9d901a6 upstream. The XADC has two internal ADCs. Depending on the mode it is operating in either one or both of them are used. The device manual calls this continuous (one ADC) and simultaneous (both ADCs) mode. The meaning of the sequencing register for the aux channels changes depending on the mode. In continuous mode each bit corresponds to one of the 16 aux channels. And the single ADC will convert them one by one in order. In simultaneous mode the aux channels are split into two groups the first 8 channels are assigned to the first ADC and the other 8 channels to the second ADC. The upper 8 bits of the sequencing register are unused and the lower 8 bits control both ADCs. This means a bit needs to be set if either the corresponding channel from the first group or the second group (or both) are set. Currently the driver does not have the special handling required for simultaneous mode. Add it. Signed-off-by: Lars-Peter Clausen Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 6e1f5c5fe3cc373866fdc3f559cd43a35bc5a09e Author: Lars-Peter Clausen Date: Fri Apr 3 15:27:14 2020 +0200 iio: xilinx-xadc: Fix clearing interrupt when enabling trigger commit f954b098fbac4d183219ce5b42d76d6df2aed50a upstream. When enabling the trigger and unmasking the end-of-sequence (EOS) interrupt the EOS interrupt should be cleared from the status register. Otherwise it is possible that it was still set from a previous capture. If that is the case the interrupt would fire immediately even though no conversion has been done yet and stale data is being read from the device. The old code only clears the interrupt if the interrupt was previously unmasked. Which does not make much sense since the interrupt is always masked at this point and in addition masking the interrupt does not clear the interrupt from the status register. So the clearing needs to be done unconditionally. Signed-off-by: Lars-Peter Clausen Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 4b5b4871e1c15b144a9160e3d56ce28af7ea7472 Author: Lars-Peter Clausen Date: Fri Apr 3 15:27:13 2020 +0200 iio: xilinx-xadc: Fix ADC-B powerdown commit e44ec7794d88f918805d700240211a9ec05ed89d upstream. The check for shutting down the second ADC is inverted. This causes it to be powered down when it should be enabled. As a result channels that are supposed to be handled by the second ADC return invalid conversion results. Signed-off-by: Lars-Peter Clausen Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 25c84be39517f516d77a7bdd4d47b235fe84a0f5 Author: Alexandre Belloni Date: Thu Apr 16 22:54:27 2020 +0200 iio: adc: ti-ads8344: properly byte swap value commit dd7de4c0023e7564cabe39d64b2822a522890792 upstream. The first received byte is the MSB, followed by the LSB so the value needs to be byte swapped. Also, the ADC actually has a delay of one clock on the SPI bus. Read three bytes to get the last bit. Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips") Signed-off-by: Alexandre Belloni Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit f0bb381b0ef2b8c53f394016d35292771ddec741 Author: Olivier Moysan Date: Mon Mar 9 11:02:12 2020 +0100 iio: adc: stm32-adc: fix sleep in atomic context commit e2042d2936dfc84e9c600fe9b9d0039ca0e54b7d upstream. This commit fixes the following error: "BUG: sleeping function called from invalid context at kernel/irq/chip.c" In DMA mode suppress the trigger irq handler, and make the buffer transfers directly in DMA callback, instead. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Olivier Moysan Acked-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 7505423749b4ecd2d9fa878ce24795d3507aed23 Author: Lary Gibaud Date: Sat Apr 11 17:16:06 2020 +0200 iio: st_sensors: rely on odr mask to know if odr can be set commit e450e07c14abae563ad13b064cbce9fdccc6bc8d upstream. Indeed, relying on addr being not 0 cannot work because some device have their register to set odr at address 0. As a matter of fact, if the odr can be set, then there is a mask. Sensors with ODR register at address 0 are: lsm303dlh, lsm303dlhc, lsm303dlm Fixes: 7d245172675a ("iio: common: st_sensors: check odr address value in st_sensors_set_odr()") Signed-off-by: Lary Gibaud Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit caf1d1c7f87daf4db0f9d4dfeeae6208e713db9e Author: Lorenzo Bianconi Date: Fri Mar 13 19:06:00 2020 +0100 iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device commit 3a63da26db0a864134f023f088d41deacd509997 upstream. flush hw FIFO before device reset in order to avoid possible races on interrupt line 1. If the first interrupt line is asserted during hw reset the device will work in I3C-only mode (if it is supported) Fixes: 801a6e0af0c6 ("iio: imu: st_lsm6dsx: add support to LSM6DSO") Fixes: 43901008fde0 ("iio: imu: st_lsm6dsx: add support to LSM6DSR") Reported-by: Mario Tesi Signed-off-by: Lorenzo Bianconi Reviewed-by: Vitor Soares Tested-by: Vitor Soares Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 31bd416b0e4877ba51a1a5764be28383f1ba4bd0 Author: Lars Engebretsen Date: Wed Apr 15 12:10:43 2020 +0200 iio: core: remove extra semi-colon from devm_iio_device_register() macro commit a07479147be03d2450376ebaff9ea1a0682f25d6 upstream. This change removes the semi-colon from the devm_iio_device_register() macro which seems to have been added by accident. Fixes: 63b19547cc3d9 ("iio: Use macro magic to avoid manual assign of driver_module") Signed-off-by: Lars Engebretsen Cc: Reviewed-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit c1d55127401aedf8d6653eaf38e2c57d34de5da8 Author: David Ahern Date: Mon Apr 20 10:18:43 2020 -0600 libbpf: Only check mode flags in get_xdp_id [ Upstream commit 257d7d4f0e69f5e8e3d38351bdcab896719dba04 ] The commit in the Fixes tag changed get_xdp_id to only return prog_id if flags is 0, but there are other XDP flags than the modes - e.g., XDP_FLAGS_UPDATE_IF_NOEXIST. Since the intention was only to look at MODE flags, clear other ones before checking if flags is 0. Fixes: f07cbad29741 ("libbpf: Fix bpf_get_link_xdp_id flags handling") Signed-off-by: David Ahern Signed-off-by: Alexei Starovoitov Acked-by: Andrey Ignatov Signed-off-by: Sasha Levin commit c3c6201ad35b8ca05ff782161d87f639a83de5a9 Author: Johannes Berg Date: Thu Apr 23 11:13:49 2020 +0200 mac80211: populate debugfs only after cfg80211 init [ Upstream commit 6cb5f3ea4654faf8c28b901266e960b1a4787b26 ] When fixing the initialization race, we neglected to account for the fact that debugfs is initialized in wiphy_register(), and some debugfs things went missing (or rather were rerooted to the global debugfs root). Fix this by adding debugfs entries only after wiphy_register(). This requires some changes in the rate control code since it currently adds debugfs at alloc time, which can no longer be done after the reordering. Reported-by: Jouni Malinen Reported-by: kernel test robot Reported-by: Hauke Mehrtens Reported-by: Felix Fietkau Cc: stable@vger.kernel.org Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()") Signed-off-by: Johannes Berg Acked-by: Sumit Garg Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 56a970f70f6a3ecda9cebfc72746ee0d14b3c004 Author: Takashi Iwai Date: Wed Apr 22 13:33:20 2020 +0200 ALSA: usb-audio: Add connector notifier delegation [ Upstream commit fef66ae73a611e84c8b4b74ff6f805ec5f113477 ] It turned out that ALC1220-VB USB-audio device gives the interrupt event to some PCM terminals while those don't allow the connector state request but only the actual I/O terminals return the request. The recent commit 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals") excluded those phantom terminals, so those events are ignored, too. My first thought was that this could be easily deduced from the associated terminals, but some of them have even no associate terminal ID, hence it's not too trivial to figure out. Since the number of such terminals are small and limited, this patch implements another quirk table for the simple mapping of the connectors. It's not really scalable, but let's hope that there will be not many such funky devices in future. Fixes: 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Link: https://lore.kernel.org/r/20200422113320.26664-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 2de32221fa0686a35e03dc7fa2b29260404d3e44 Author: Takashi Iwai Date: Mon Apr 20 08:20:36 2020 +0200 ALSA: usb-audio: Add static mapping table for ALC1220-VB-based mobos [ Upstream commit a43c1c41bc5145971d06edc42a6b1e8faa0e2bc3 ] TRX40 mobos from MSI and others with ALC1220-VB USB-audio device need yet more quirks for the proper control names. This patch provides the mapping table for those boards, correcting the FU names for volume and mute controls as well as the terminal names for jack controls. It also improves build_connector_control() not to add the directional suffix blindly if the string is given from the mapping table. With this patch applied, the new UCM profiles will be effective. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Link: https://lore.kernel.org/r/20200420062036.28567-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 0387bd357ea6c8b39b6d808ce5ac3bc04925b838 Author: Takashi Iwai Date: Sun Apr 19 09:19:26 2020 +0200 ALSA: hda: Remove ASUS ROG Zenith from the blacklist [ Upstream commit a8cf44f085ac12c0b5b8750ebb3b436c7f455419 ] The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a new blacklist for the devices that are known to have empty codecs, and one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f). However, it turned out that the very same PCI SSID is used for the previous model that does have the valid HD-audio codecs and the change broke the sound on it. This patch reverts the corresponding entry as a temporary solution. Although Zenith II and co will see get the empty HD-audio bus again, it'd be merely resource wastes and won't affect the functionality, so it's no end of the world. We'll need to address this later, e.g. by either switching to DMI string matching or using PCI ID & SSID pairs. Fixes: 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") Reported-by: Johnathan Smithinovic Cc: Link: https://lore.kernel.org/r/20200419071926.22683-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 9e1fda3c15966cc65e5620fac607a1d4c61f8acc Author: Waiman Long Date: Sat Mar 21 21:11:25 2020 -0400 KEYS: Avoid false positive ENOMEM error on key read [ Upstream commit 4f0882491a148059a52480e753b7f07fc550e188 ] By allocating a kernel buffer with a user-supplied buffer length, it is possible that a false positive ENOMEM error may be returned because the user-supplied length is just too large even if the system do have enough memory to hold the actual key data. Moreover, if the buffer length is larger than the maximum amount of memory that can be returned by kmalloc() (2^(MAX_ORDER-1) number of pages), a warning message will also be printed. To reduce this possibility, we set a threshold (PAGE_SIZE) over which we do check the actual key length first before allocating a buffer of the right size to hold it. The threshold is arbitrary, it is just used to trigger a buffer length check. It does not limit the actual key length as long as there is enough memory to satisfy the memory request. To further avoid large buffer allocation failure due to page fragmentation, kvmalloc() is used to allocate the buffer so that vmapped pages can be used when there is not a large enough contiguous set of pages available for allocation. In the extremely unlikely scenario that the key keeps on being changed and made longer (still <= buflen) in between 2 __keyctl_read_key() calls, the __keyctl_read_key() calling loop in keyctl_read_key() may have to be iterated a large number of times, but definitely not infinite. Signed-off-by: Waiman Long Signed-off-by: David Howells Signed-off-by: Sasha Levin commit 4fe6bda69d4638a92ef63ed685229921b7d3ac03 Author: Tang Bin Date: Thu Apr 23 10:16:31 2020 +0800 net: ethernet: ixp4xx: Add error handling in ixp4xx_eth_probe() [ Upstream commit 6ed79cec3ced6e346a10a70120fcee5f03591bab ] The function ixp4xx_eth_probe() does not perform sufficient error checking after executing devm_ioremap_resource(), which can result in crashes if a critical error path is encountered. Fixes: f458ac479777 ("ARM/net: ixp4xx: Pass ethernet physical base as resource") Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit cc02b02aac2b57486bc3e7c78a605fce8f6b7f00 Author: David Ahern Date: Mon Apr 20 17:13:52 2020 -0600 vrf: Check skb for XFRM_TRANSFORMED flag [ Upstream commit 16b9db1ce34ff00d6c18e82825125cfef0cdfb13 ] To avoid a loop with qdiscs and xfrms, check if the skb has already gone through the qdisc attached to the VRF device and then to the xfrm layer. If so, no need for a second redirect. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Trev Larock Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5bffb32815e656752d62119da8edad686a8de814 Author: David Ahern Date: Mon Apr 20 17:13:51 2020 -0600 xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finish [ Upstream commit 0c922a4850eba2e668f73a3f1153196e09abb251 ] IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by xfrm code to tell other skb handlers that the packet has been passed through the xfrm output functions. Simplify the code and just always set them rather than conditionally based on netfilter enabled thus making the flag available for other users. Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit da8c58ba7e1b831663a241c2114be68ae188c0da Author: Sabrina Dubroca Date: Wed Apr 22 17:29:51 2020 +0200 geneve: use the correct nlattr array in NL_SET_ERR_MSG_ATTR [ Upstream commit 9a7b5b50de8a764671ba1800fe4c52d3b7013901 ] IFLA_GENEVE_* attributes are in the data array, which is correctly used when fetching the value, but not when setting the extended ack. Because IFLA_GENEVE_MAX < IFLA_MAX, we avoid out of bounds array accesses, but we don't provide a pointer to the invalid attribute to userspace. Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 08f070e4d12e43a6fcfb35d351c525b9af856c1b Author: Sabrina Dubroca Date: Wed Apr 22 17:29:50 2020 +0200 vxlan: use the correct nlattr array in NL_SET_ERR_MSG_ATTR [ Upstream commit cc8e7c69db4dcc565ed3020f97ddd6debab6cbe8 ] IFLA_VXLAN_* attributes are in the data array, which is correctly used when fetching the value, but not when setting the extended ack. Because IFLA_VXLAN_MAX < IFLA_MAX, we avoid out of bounds array accesses, but we don't provide a pointer to the invalid attribute to userspace. Fixes: 653ef6a3e4af ("vxlan: change vxlan_[config_]validate() to use netlink_ext_ack for error reporting") Fixes: b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 19cd83c670af9504e34e6154b886ee13f5ef1760 Author: Florian Fainelli Date: Mon Apr 20 20:26:55 2020 -0700 net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVL [ Upstream commit 64fec9493f7dc9bdd7233bcfe98985c45bd0e3c1 ] Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a386e583237092232b6d4295c795c5a7acc0480d Author: Florian Fainelli Date: Mon Apr 20 20:26:54 2020 -0700 net: dsa: b53: Rework ARL bin logic [ Upstream commit 6344dbde6a27d10d16246d734b968f84887841e2 ] When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4b10225d869fe184de69ae3cc31c5313b65abb63 Author: Florian Fainelli Date: Mon Apr 20 20:26:53 2020 -0700 net: dsa: b53: Fix ARL register definitions [ Upstream commit c2e77a18a7ed65eb48f6e389b6a59a0fd753646a ] The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 13228bead69b6a96d5c35bf92459c4e12a6277f0 Author: Florian Fainelli Date: Mon Apr 20 20:26:52 2020 -0700 net: dsa: b53: Fix valid setting for MDB entries [ Upstream commit eab167f4851a19c514469dfa81147f77e17b5b20 ] When support for the MDB entries was added, the valid bit was correctly changed to be assigned depending on the remaining port bitmask, that is, if there were no more ports added to the entry's port bitmask, the entry now becomes invalid. There was another assignment a few lines below that would override this which would invalidate entries even when there were still multiple ports left in the MDB entry. Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e0872ade3d62571491b6dc670802b7aa86b89080 Author: Florian Fainelli Date: Mon Apr 20 20:26:51 2020 -0700 net: dsa: b53: Lookup VID in ARL searches when VLAN is enabled [ Upstream commit 2e97b0cd1651a270f3a3fcf42115c51f3284c049 ] When VLAN is enabled, and an ARL search is issued, we also need to compare the full {MAC,VID} tuple before returning a successful search result. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b859bd9dbbda9e3aedecbc56c9d09676af2cd607 Author: David Ahern Date: Tue Apr 21 17:48:27 2020 -0600 vrf: Fix IPv6 with qdisc and xfrm [ Upstream commit a53c102872ad6e34e1518e25899dc9498c27f8b1 ] When a qdisc is attached to the VRF device, the packet goes down the ndo xmit function which is setup to send the packet back to the VRF driver which does a lookup to send the packet out. The lookup in the VRF driver is not considering xfrm policies. Change it to use ip6_dst_lookup_flow rather than ip6_route_output. Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b98430f641bbd5916f9db82977e234672e1b6d51 Author: Xiyu Yang Date: Wed Apr 15 16:40:28 2020 +0800 tipc: Fix potential tipc_node refcnt leak in tipc_rcv [ Upstream commit de058420767df21e2b6b0f3bb36d1616fb962032 ] tipc_rcv() invokes tipc_node_find() twice, which returns a reference of the specified tipc_node object to "n" with increased refcnt. When tipc_rcv() returns or a new object is assigned to "n", the original local reference of "n" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in some paths of tipc_rcv(), which forget to decrease the refcnt increased by tipc_node_find() and will cause a refcnt leak. Fix this issue by calling tipc_node_put() before the original object pointed by "n" becomes invalid. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f19b022e6bb71c177710985471403c6374f7ab8f Author: Xiyu Yang Date: Wed Apr 15 16:39:56 2020 +0800 tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv [ Upstream commit 441870ee4240cf67b5d3ab8e16216a9ff42eb5d6 ] tipc_crypto_rcv() invokes tipc_aead_get(), which returns a reference of the tipc_aead object to "aead" with increased refcnt. When tipc_crypto_rcv() returns, the original local reference of "aead" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one error path of tipc_crypto_rcv(). When TIPC message decryption status is EINPROGRESS or EBUSY, the function forgets to decrease the refcnt increased by tipc_aead_get() and causes a refcnt leak. Fix this issue by calling tipc_aead_put() on the error path when TIPC message decryption status is EINPROGRESS or EBUSY. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 505148289b54b54fec090d665b71c5cda17f4924 Author: Taehee Yoo Date: Mon Apr 20 15:01:33 2020 +0000 team: fix hang in team_mode_get() [ Upstream commit 1c30fbc76b8f0c07c92a8ca4cd7c456612e17eb5 ] When team mode is changed or set, the team_mode_get() is called to check whether the mode module is inserted or not. If the mode module is not inserted, it calls the request_module(). In the request_module(), it creates a child process, which is the "modprobe" process and waits for the done of the child process. At this point, the following locks were used. down_read(&cb_lock()); by genl_rcv() genl_lock(); by genl_rcv_msc() rtnl_lock(); by team_nl_cmd_options_set() mutex_lock(&team->lock); by team_nl_team_get() Concurrently, the team module could be removed by rmmod or "modprobe -r" The __exit function of team module is team_module_exit(), which calls team_nl_fini() and it tries to acquire following locks. down_write(&cb_lock); genl_lock(); Because of the genl_lock() and cb_lock, this process can't be finished earlier than request_module() routine. The problem secenario. CPU0 CPU1 team_mode_get request_module() modprobe -r team_mode_roundrobin team <--(B) modprobe team <--(A) team_mode_roundrobin By request_module(), the "modprobe team_mode_roundrobin" command will be executed. At this point, the modprobe process will decide that the team module should be inserted before team_mode_roundrobin. Because the team module is being removed. By the module infrastructure, the same module insert/remove operations can't be executed concurrently. So, (A) waits for (B) but (B) also waits for (A) because of locks. So that the hang occurs at this point. Test commands: while : do teamd -d & killall teamd & modprobe -rv team_mode_roundrobin & done The approach of this patch is to hold the reference count of the team module if the team module is compiled as a module. If the reference count of the team module is not zero while request_module() is being called, the team module will not be removed at that moment. So that the above scenario could not occur. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Taehee Yoo Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1264e041578ee7809769443e783b22629136e4f9 Author: Eric Dumazet Date: Fri Apr 17 07:10:23 2020 -0700 tcp: cache line align MAX_TCP_HEADER [ Upstream commit 9bacd256f1354883d3c1402655153367982bba49 ] TCP stack is dumb in how it cooks its output packets. Depending on MAX_HEADER value, we might chose a bad ending point for the headers. If we align the end of TCP headers to cache line boundary, we make sure to always use the smallest number of cache lines, which always help. Signed-off-by: Eric Dumazet Cc: Soheil Hassas Yeganeh Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit d232f566ee53c897a72d83b22f164e2393611f41 Author: David Ahern Date: Tue Apr 21 08:47:24 2020 -0600 selftests: Fix suppress test in fib_tests.sh [ Upstream commit 2c1dd4c110627c2a4f006643f074119205cfcff4 ] fib_tests is spewing errors: ... Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ping: connect: Network is unreachable Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ... Each test entry in fib_tests is supposed to do its own setup and cleanup. Right now the $IP commands in fib_suppress_test are failing because there is no ns1. Add the setup/cleanup and logging expected for each test. Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern Cc: Jason A. Donenfeld Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 376a397e38079d549039cbb932088ff5c5938ee2 Author: Eric Dumazet Date: Tue Apr 21 10:00:28 2020 -0700 sched: etf: do not assume all sockets are full blown [ Upstream commit a1211bf9a7774706722ba3b18c6157d980319f79 ] skb->sk does not always point to a full blown socket, we need to use sk_fullsock() before accessing fields which only make sense on full socket. BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141 Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630 CPU: 1 PID: 9630 Comm: syz-executor.5 Not tainted 5.7.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382 __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 report_sock_error+0x286/0x300 net/sched/sch_etf.c:141 etf_enqueue_timesortedlist+0x389/0x740 net/sched/sch_etf.c:170 __dev_xmit_skb net/core/dev.c:3710 [inline] __dev_queue_xmit+0x154a/0x30a0 net/core/dev.c:4021 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0xfb5/0x25b0 net/ipv6/ip6_output.c:117 __ip6_finish_output+0x442/0xab0 net/ipv6/ip6_output.c:143 ip6_finish_output+0x34/0x1f0 net/ipv6/ip6_output.c:153 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x239/0x810 net/ipv6/ip6_output.c:176 dst_output include/net/dst.h:435 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_xmit+0xe1a/0x2090 net/ipv6/ip6_output.c:280 tcp_v6_send_synack+0x4e7/0x960 net/ipv6/tcp_ipv6.c:521 tcp_rtx_synack+0x10d/0x1a0 net/ipv4/tcp_output.c:3916 inet_rtx_syn_ack net/ipv4/inet_connection_sock.c:669 [inline] reqsk_timer_handler+0x4c2/0xb40 net/ipv4/inet_connection_sock.c:763 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1405 expire_timers kernel/time/timer.c:1450 [inline] __run_timers kernel/time/timer.c:1774 [inline] __run_timers kernel/time/timer.c:1741 [inline] run_timer_softirq+0x623/0x1600 kernel/time/timer.c:1787 __do_softirq+0x26c/0x9f7 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x192/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x19e/0x600 arch/x86/kernel/apic/apic.c:1140 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 RIP: 0010:des_encrypt+0x157/0x9c0 lib/crypto/des.c:792 Code: 85 22 06 00 00 41 31 dc 41 8b 4d 04 44 89 e2 41 83 e4 3f 4a 8d 3c a5 60 72 72 88 81 e2 3f 3f 3f 3f 48 89 f8 48 c1 e8 03 31 d9 <0f> b6 34 28 48 89 f8 c1 c9 04 83 e0 07 83 c0 03 40 38 f0 7c 09 40 RSP: 0018:ffffc90003b5f6c0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff10e4e55 RBX: 00000000d2f846d0 RCX: 00000000d2f846d0 RDX: 0000000012380612 RSI: ffffffff839863ca RDI: ffffffff887272a8 RBP: dffffc0000000000 R08: ffff888091d0a380 R09: 0000000000800081 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000012 R13: ffff8880a8ae8078 R14: 00000000c545c93e R15: 0000000000000006 cipher_crypt_one crypto/cipher.c:75 [inline] crypto_cipher_encrypt_one+0x124/0x210 crypto/cipher.c:82 crypto_cbcmac_digest_update+0x1b5/0x250 crypto/ccm.c:830 crypto_shash_update+0xc4/0x120 crypto/shash.c:119 shash_ahash_update+0xa3/0x110 crypto/shash.c:246 crypto_ahash_update include/crypto/hash.h:547 [inline] hash_sendmsg+0x518/0xad0 crypto/algif_hash.c:102 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x308/0x7e0 net/socket.c:2362 ___sys_sendmsg+0x100/0x170 net/socket.c:2416 __sys_sendmmsg+0x195/0x480 net/socket.c:2506 __do_sys_sendmmsg net/socket.c:2535 [inline] __se_sys_sendmmsg net/socket.c:2532 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2532 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f6d9528ec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004fc080 RCX: 000000000045c829 RDX: 0000000000000001 RSI: 0000000020002640 RDI: 0000000000000004 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000008d7 R14: 00000000004cb7aa R15: 00007f6d9528f6d4 Fixes: 4b15c7075352 ("net/sched: Make etf report drops on error_queue") Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Vinicius Costa Gomes Reviewed-by: Vinicius Costa Gomes Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e84a1837919b4d361459ec33073824904c248501 Author: Xiyu Yang Date: Thu Apr 23 13:13:03 2020 +0800 net/x25: Fix x25_neigh refcnt leak when receiving frame [ Upstream commit f35d12971b4d814cdb2f659d76b42f0c545270b6 ] x25_lapb_receive_frame() invokes x25_get_neigh(), which returns a reference of the specified x25_neigh object to "nb" with increased refcnt. When x25_lapb_receive_frame() returns, local variable "nb" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one path of x25_lapb_receive_frame(). When pskb_may_pull() returns false, the function forgets to decrease the refcnt increased by x25_get_neigh(), causing a refcnt leak. Fix this issue by calling x25_neigh_put() when pskb_may_pull() returns false. Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs") Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit d8d56840aaaf275eb6a7bd0481bdae1a2f4799f5 Author: Marc Zyngier Date: Sat Apr 18 19:14:57 2020 +0100 net: stmmac: dwmac-meson8b: Add missing boundary to RGMII TX clock array [ Upstream commit f0212a5ebfa6cd789ab47666b9cc169e6e688732 ] Running with KASAN on a VIM3L systems leads to the following splat when probing the Ethernet device: ================================================================== BUG: KASAN: global-out-of-bounds in _get_maxdiv+0x74/0xd8 Read of size 4 at addr ffffa000090615f4 by task systemd-udevd/139 CPU: 1 PID: 139 Comm: systemd-udevd Tainted: G E 5.7.0-rc1-00101-g8624b7577b9c #781 Hardware name: amlogic w400/w400, BIOS 2020.01-rc5 03/12/2020 Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x20/0x30 dump_stack+0xec/0x148 print_address_description.isra.12+0x70/0x35c __kasan_report+0xfc/0x1d4 kasan_report+0x4c/0x68 __asan_load4+0x9c/0xd8 _get_maxdiv+0x74/0xd8 clk_divider_bestdiv+0x74/0x5e0 clk_divider_round_rate+0x80/0x1a8 clk_core_determine_round_nolock.part.9+0x9c/0xd0 clk_core_round_rate_nolock+0xf0/0x108 clk_hw_round_rate+0xac/0xf0 clk_factor_round_rate+0xb8/0xd0 clk_core_determine_round_nolock.part.9+0x9c/0xd0 clk_core_round_rate_nolock+0xf0/0x108 clk_core_round_rate_nolock+0xbc/0x108 clk_core_set_rate_nolock+0xc4/0x2e8 clk_set_rate+0x58/0xe0 meson8b_dwmac_probe+0x588/0x72c [dwmac_meson8b] platform_drv_probe+0x78/0xd8 really_probe+0x158/0x610 driver_probe_device+0x140/0x1b0 device_driver_attach+0xa4/0xb0 __driver_attach+0xcc/0x1c8 bus_for_each_dev+0xf4/0x168 driver_attach+0x3c/0x50 bus_add_driver+0x238/0x2e8 driver_register+0xc8/0x1e8 __platform_driver_register+0x88/0x98 meson8b_dwmac_driver_init+0x28/0x1000 [dwmac_meson8b] do_one_initcall+0xa8/0x328 do_init_module+0xe8/0x368 load_module+0x3300/0x36b0 __do_sys_finit_module+0x120/0x1a8 __arm64_sys_finit_module+0x4c/0x60 el0_svc_common.constprop.2+0xe4/0x268 do_el0_svc+0x98/0xa8 el0_svc+0x24/0x68 el0_sync_handler+0x12c/0x318 el0_sync+0x158/0x180 The buggy address belongs to the variable: div_table.63646+0x34/0xfffffffffffffa40 [dwmac_meson8b] Memory state around the buggy address: ffffa00009061480: fa fa fa fa 00 00 00 01 fa fa fa fa 00 00 00 00 ffffa00009061500: 05 fa fa fa fa fa fa fa 00 04 fa fa fa fa fa fa >ffffa00009061580: 00 03 fa fa fa fa fa fa 00 00 00 00 00 00 fa fa ^ ffffa00009061600: fa fa fa fa 00 01 fa fa fa fa fa fa 01 fa fa fa ffffa00009061680: fa fa fa fa 00 01 fa fa fa fa fa fa 04 fa fa fa ================================================================== Digging into this indeed shows that the clock divider array is lacking a final fence, and that the clock subsystems goes in the weeds. Oh well. Let's add the empty structure that indicates the end of the array. Fixes: bd6f48546b9c ("net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs") Signed-off-by: Marc Zyngier Cc: Martin Blumenstingl Reviewed-by: Martin Blumenstingl Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit cab77722b1a1adcdc23c4ee8e132204c7615d73e Author: Tonghao Zhang Date: Fri Apr 17 02:57:31 2020 +0800 net: openvswitch: ovs_ct_exit to be done under ovs_lock [ Upstream commit 27de77cec985233bdf6546437b9761853265c505 ] syzbot wrote: | ============================= | WARNING: suspicious RCU usage | 5.7.0-rc1+ #45 Not tainted | ----------------------------- | net/openvswitch/conntrack.c:1898 RCU-list traversed in non-reader section!! | | other info that might help us debug this: | rcu_scheduler_active = 2, debug_locks = 1 | ... | | stack backtrace: | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 | Workqueue: netns cleanup_net | Call Trace: | ... | ovs_ct_exit | ovs_exit_net | ops_exit_list.isra.7 | cleanup_net | process_one_work | worker_thread To avoid that warning, invoke the ovs_ct_exit under ovs_lock and add lockdep_ovsl_is_held as optional lockdep expression. Link: https://lore.kernel.org/lkml/000000000000e642a905a0cbee6e@google.com Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Cc: Pravin B Shelar Cc: Yi-Hung Wei Reported-by: syzbot+7ef50afd3a211f879112@syzkaller.appspotmail.com Signed-off-by: Tonghao Zhang Acked-by: Pravin B Shelar Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0cb4e4372a27f1d73a489c6f8fbf1d39f96ffd43 Author: Xiyu Yang Date: Wed Apr 15 16:36:19 2020 +0800 net: netrom: Fix potential nr_neigh refcnt leak in nr_add_node [ Upstream commit d03f228470a8c0a22b774d1f8d47071e0de4f6dd ] nr_add_node() invokes nr_neigh_get_dev(), which returns a local reference of the nr_neigh object to "nr_neigh" with increased refcnt. When nr_add_node() returns, "nr_neigh" becomes invalid, so the refcount should be decreased to keep refcount balanced. The issue happens in one normal path of nr_add_node(), which forgets to decrease the refcnt increased by nr_neigh_get_dev() and causes a refcnt leak. It should decrease the refcnt before the function returns like other normal paths do. Fix this issue by calling nr_neigh_put() before the nr_add_node() returns. Signed-off-by: Xiyu Yang Signed-off-by: Xin Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 3417cdbd18443a625137ec82b48bb0ce8530e273 Author: Eric Dumazet Date: Wed Apr 15 09:46:52 2020 -0700 net/mlx4_en: avoid indirect call in TX completion [ Upstream commit 310660a14b74c380b0ef5c12b66933d6a3d1b59f ] Commit 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support") brought another indirect call in fast path. Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call when/if CONFIG_RETPOLINE=y Signed-off-by: Eric Dumazet Cc: Tariq Toukan Cc: Willem de Bruijn Reviewed-by: Saeed Mahameed Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 74b32d9388a961bef6e4d251d572d66ac7c75ac4 Author: Doug Berger Date: Thu Apr 23 15:44:17 2020 -0700 net: bcmgenet: correct per TX/RX ring statistics [ Upstream commit a6d0b83f25073bdf08b8547aeff961a62c6ab229 ] The change to track net_device_stats per ring to better support SMP missed updating the rx_dropped member. The ndo_get_stats method is also needed to combine the results for ethtool statistics (-S) before filling in the ethtool structure. Fixes: 37a30b435b92 ("net: bcmgenet: Track per TX/RX rings statistics") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 731fc2c5f6fab8dcccb55d0cb678eb5925f7188a Author: Dan Carpenter Date: Wed Apr 22 12:36:41 2020 +0300 mlxsw: Fix some IS_ERR() vs NULL bugs [ Upstream commit c391eb8366ae052d571bb2841f1ccb4d39f3ceb8 ] The mlxsw_sp_acl_rulei_create() function is supposed to return an error pointer from mlxsw_afa_block_create(). The problem is that these functions both return NULL instead of error pointers. Half the callers expect NULL and half expect error pointers so it could lead to a NULL dereference on failure. This patch changes both of them to return error pointers and changes all the callers which checked for NULL to check for IS_ERR() instead. Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Dan Carpenter Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f39a7ada667f2bdba2e12fe879b8fd250a2f83ba Author: Taehee Yoo Date: Mon Apr 20 13:29:40 2020 +0000 macvlan: fix null dereference in macvlan_device_event() [ Upstream commit 4dee15b4fd0d61ec6bbd179238191e959d34cf7a ] In the macvlan_device_event(), the list_first_entry_or_null() is used. This function could return null pointer if there is no node. But, the macvlan module doesn't check the null pointer. So, null-ptr-deref would occur. bond0 | +----+-----+ | | macvlan0 macvlan1 | | dummy0 dummy1 The problem scenario. If dummy1 is removed, 1. ->dellink() of dummy1 is called. 2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module. 3. ->dellink() of macvlan1 is called. 4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module. 5. __bond_release_one() is called and it internally calls dev_set_mac_address(). 6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1, which is macvlan_set_mac_address(). 7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1. 8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module. 9. In the macvlan_device_event(), it calls list_first_entry_or_null(). At this point, dummy1 and macvlan1 were removed. So, list_first_entry_or_null() will return NULL. Test commands: ip netns add nst ip netns exec nst ip link add bond0 type bond for i in {0..10} do ip netns exec nst ip link add dummy$i type dummy ip netns exec nst ip link add macvlan$i link dummy$i \ type macvlan mode passthru ip netns exec nst ip link set macvlan$i master bond0 done ip netns del nst Splat looks like: [ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI [ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532 [ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.590469][ T146] Workqueue: netns cleanup_net [ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan] [ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2 [ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246 [ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360 [ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421 [ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008 [ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a [ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000 [ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0 [ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.603443][ T146] Call Trace: [ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables] [ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan] [ 40.605212][ T146] ? __module_text_address+0x13/0x140 [ 40.605842][ T146] notifier_call_chain+0x90/0x160 [ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0 [ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.607762][ T146] ? __module_text_address+0x13/0x140 [ 40.608440][ T146] ? notifier_call_chain+0x90/0x160 [ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0 [ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0 [ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding] [ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding] [ 40.617642][ T146] ? lock_downgrade+0x730/0x730 [ 40.618218][ T146] ? check_flags.part.42+0x450/0x450 [ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670 [ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180 [ 40.620117][ T146] ? wait_for_completion+0x250/0x250 [ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding] [ 40.621460][ T146] ? __module_text_address+0x13/0x140 [ 40.622097][ T146] notifier_call_chain+0x90/0x160 [ 40.622806][ T146] rollback_registered_many+0x660/0xcf0 [ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780 [ 40.624290][ T146] ? notifier_call_chain+0x90/0x160 [ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180 [ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30 [ 40.626421][ T146] ? mutex_is_locked+0x13/0x50 [ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240 [ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0 [ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390 [ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40 [ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0 [ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0 [ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140 [ 40.631554][ T146] cleanup_net+0x441/0x890 [ ... ] Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: syzbot+5035b1f9dc7ea4558d5a@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 3e9cb6309c854f8cc82c38068e1cf80e8e8d10d8 Author: Taehee Yoo Date: Thu Apr 23 13:40:47 2020 +0000 macsec: avoid to set wrong mtu [ Upstream commit 7f327080364abccf923fa5a5b24e038eb0ba1407 ] When a macsec interface is created, the mtu is calculated with the lower interface's mtu value. If the mtu of lower interface is lower than the length, which is needed by macsec interface, macsec's mtu value will be overflowed. So, if the lower interface's mtu is too low, macsec interface's mtu should be set to 0. Test commands: ip link add dummy0 mtu 10 type dummy ip link add macsec0 link dummy0 type macsec ip link show macsec0 Before: 11: macsec0@dummy0: mtu 4294967274 After: 11: macsec0@dummy0: mtu 0 Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 6caaf0fc368f6408c5c04dd9215f0813b1e76811 Author: John Haxby Date: Sat Apr 18 16:30:49 2020 +0100 ipv6: fix restrict IPV6_ADDRFORM operation [ Upstream commit 82c9ae440857840c56e05d4fb1427ee032531346 ] Commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") fixed a problem found by syzbot an unfortunate logic error meant that it also broke IPV6_ADDRFORM. Rearrange the checks so that the earlier test is just one of the series of checks made before moving the socket from IPv6 to IPv4. Fixes: b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation") Signed-off-by: John Haxby Cc: stable@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 9e6283465efe2dd6c5d081fbdd2dc47776863b86 Author: David Ahern Date: Wed Apr 22 15:40:20 2020 -0600 ipv4: Update fib_select_default to handle nexthop objects [ Upstream commit 7c74b0bec918c1e0ca0b4208038c156eacf8f13f ] A user reported [0] hitting the WARN_ON in fib_info_nh: [ 8633.839816] ------------[ cut here ]------------ [ 8633.839819] WARNING: CPU: 0 PID: 1719 at include/net/nexthop.h:251 fib_select_path+0x303/0x381 ... [ 8633.839846] RIP: 0010:fib_select_path+0x303/0x381 ... [ 8633.839848] RSP: 0018:ffffb04d407f7d00 EFLAGS: 00010286 [ 8633.839850] RAX: 0000000000000000 RBX: ffff9460b9897ee8 RCX: 00000000000000fe [ 8633.839851] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: 0000000000000000 [ 8633.839852] RBP: ffff946076049850 R08: 0000000059263a83 R09: ffff9460840e4000 [ 8633.839853] R10: 0000000000000014 R11: 0000000000000000 R12: ffffb04d407f7dc0 [ 8633.839854] R13: ffffffffa4ce3240 R14: 0000000000000000 R15: ffff9460b7681f60 [ 8633.839857] FS: 00007fcac2e02700(0000) GS:ffff9460bdc00000(0000) knlGS:0000000000000000 [ 8633.839858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8633.839859] CR2: 00007f27beb77e28 CR3: 0000000077734000 CR4: 00000000000006f0 [ 8633.839867] Call Trace: [ 8633.839871] ip_route_output_key_hash_rcu+0x421/0x890 [ 8633.839873] ip_route_output_key_hash+0x5e/0x80 [ 8633.839876] ip_route_output_flow+0x1a/0x50 [ 8633.839878] __ip4_datagram_connect+0x154/0x310 [ 8633.839880] ip4_datagram_connect+0x28/0x40 [ 8633.839882] __sys_connect+0xd6/0x100 ... The WARN_ON is triggered in fib_select_default which is invoked when there are multiple default routes. Update the function to use fib_info_nhc and convert the nexthop checks to use fib_nh_common. Add test case that covers the affected code path. [0] https://github.com/FRRouting/frr/issues/6089 Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects") Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 825200b65b83b03e5ffe6fe7751502b5fac93f78 Author: Rahul Lakkireddy Date: Mon Apr 20 15:26:54 2020 +0530 cxgb4: fix large delays in PTP synchronization [ Upstream commit bd019427bf3623ee3c7d2845cf921bbf4c14846c ] Fetching PTP sync information from mailbox is slow and can take up to 10 milliseconds. Reduce this unnecessary delay by directly reading the information from the corresponding registers. Fixes: 9c33e4208bce ("cxgb4: Add PTP Hardware Clock (PHC) support") Signed-off-by: Manoj Malviya Signed-off-by: Rahul Lakkireddy Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 6994aa4b7e6afb11a3fb5d28a6fd4fd4d9137acf Author: Vishal Kulkarni Date: Wed Apr 22 21:20:07 2020 +0530 cxgb4: fix adapter crash due to wrong MC size [ Upstream commit ce222748078592afb51b810dc154531aeba4f512 ] In the absence of MC1, the size calculation function cudbg_mem_region_size() was returing wrong MC size and resulted in adapter crash. This patch adds new argument to cudbg_mem_region_size() which will have actual size and returns error to caller in the absence of MC1. Fixes: a1c69520f785 ("cxgb4: collect MC memory dump") Signed-off-by: Vishal Kulkarni " Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 8ecb61c6fbb623339c28bb9d5427568c1254f4bb Author: Christoph Hellwig Date: Fri Apr 10 14:31:47 2020 +0200 block: fix busy device checking in blk_drop_partitions again [ Upstream commit cb6b771b05c3026a85ed4817c1b87c5e6f41d136 ] The previous fix had an off by one in the bd_openers checking, counting the callers blkdev_get. Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions") Reported-by: Qian Cai Signed-off-by: Christoph Hellwig Tested-by: Qian Cai Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 1a8d4f243ce4fab2d7f54331ba5b998ca27fe914 Author: Mathias Nyman Date: Thu Mar 12 16:45:16 2020 +0200 xhci: Finetune host initiated USB3 rootport link suspend and resume [ Upstream commit ceca49382ac20e06ce04c21279c7f2868c4ec1d4 ] Depending on the current link state the steps to resume the link to U0 varies. The normal case when a port is suspended (U3) we set the link to U0 and wait for a port event when U3exit completed and port moved to U0. If the port is in U1/U2, then no event is issued, just set link to U0 If port is in Resume or Recovery state then the device has already initiated resume, and this host initiated resume is racing against it. Port event handler for device initiated resume will set link to U0, just wait for the port to reach U0 before returning. Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200312144517.1593-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit fcb3be299225d7b2a679588fb05b21b1c8131bd8 Author: Kai-Heng Feng Date: Thu Mar 12 16:45:15 2020 +0200 xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0 [ Upstream commit 0200b9f790b0fc9e9a42f685f5ad54b23fe959f4 ] Like U3 case, xHCI spec doesn't specify the upper bound of U0 transition time. The 20ms is not enough for some devices. Intead of polling PLS or PLC, we can facilitate the port change event to know that the link transits to U0 is completed. While at it, also separate U0 and U3 case to make the code cleaner. [variable rename to u3exit, and skip completion for usb2 ports -Mathias ] Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200312144517.1593-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 23c61cc34e187a16124bd05a6ce1f83cbdf77010 Author: Kai-Heng Feng Date: Thu Mar 12 16:45:14 2020 +0200 xhci: Ensure link state is U3 after setting USB_SS_PORT_LS_U3 [ Upstream commit eb002726fac7cefb98ff39ddb89e150a1c24fe85 ] The xHCI spec doesn't specify the upper bound of U3 transition time. For some devices 20ms is not enough, so we need to make sure the link state is in U3 before further actions. I've tried to use U3 Entry Capability by setting U3 Entry Enable in config register, however the port change event for U3 transition interrupts the system suspend process. For now let's use the less ideal method by polling PLS. [use usleep_range(), and shorten the delay time while polling -Mathias] Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 2073b86560d30a7d669a1e77fac7403f5e491774 Author: František Kučera Date: Wed Apr 1 11:59:07 2020 +0200 ALSA: usb-audio: Add Pioneer DJ DJM-250MK2 quirk [ Upstream commit 73d8c94084341e2895169a0462dbc18167f01683 ] Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card. The MIDI controller part is standard but the PCM part is "vendor specific". Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE. Input is not working. Signed-off-by: František Kučera Link: https://lore.kernel.org/r/20200401095907.3387-1-konference@frantovo.cz Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit f124991cef6def8f5076a2b039f14e2b13fdfea1 Author: Hans de Goede Date: Sun Apr 5 15:37:26 2020 +0200 ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN MPWIN895CL tablet [ Upstream commit c8b78f24c1247b7bd0882885c672d9dec5800bc6 ] The MPMAN MPWIN895CL tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200405133726.24154-1-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 2a541bce92e7c1eb1694ca165dda1f48c570f089 Author: Nicholas Kazlauskas Date: Sun Apr 5 16:40:57 2020 -0400 drm/amd/display: Calculate scaling ratios on every medium/full update [ Upstream commit 3bae20137cae6c03f58f96c0bc9f3d46f0bc17d4 ] [Why] If a plane isn't being actively enabled or disabled then DC won't always recalculate scaling rects and ratios for the primary plane. This results in only a partial or corrupted rect being displayed on the screen instead of scaling to fit the screen. [How] Add back the logic to recalculate the scaling rects into dc_commit_updates_for_stream since this is the expected place to do it in DC. This was previously removed a few years ago to fix an underscan issue but underscan is still functional now with this change - and it should be, since this is only updating to the latest plane state getting passed in. Signed-off-by: Nicholas Kazlauskas Reviewed-by: Aric Cyr Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 328e1d3a8332c0f0a5b23eadac2f86a5393e63bc Author: Jiri Olsa Date: Tue Apr 7 16:14:27 2020 +0200 perf/core: Disable page faults when getting phys address [ Upstream commit d3296fb372bf7497b0e5d0478c4e7a677ec6f6e9 ] We hit following warning when running tests on kernel compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y: WARNING: CPU: 19 PID: 4472 at mm/gup.c:2381 __get_user_pages_fast+0x1a4/0x200 CPU: 19 PID: 4472 Comm: dummy Not tainted 5.6.0-rc6+ #3 RIP: 0010:__get_user_pages_fast+0x1a4/0x200 ... Call Trace: perf_prepare_sample+0xff1/0x1d90 perf_event_output_forward+0xe8/0x210 __perf_event_overflow+0x11a/0x310 __intel_pmu_pebs_event+0x657/0x850 intel_pmu_drain_pebs_nhm+0x7de/0x11d0 handle_pmi_common+0x1b2/0x650 intel_pmu_handle_irq+0x17b/0x370 perf_event_nmi_handler+0x40/0x60 nmi_handle+0x192/0x590 default_do_nmi+0x6d/0x150 do_nmi+0x2f9/0x3c0 nmi+0x8e/0xd7 While __get_user_pages_fast() is IRQ-safe, it calls access_ok(), which warns on: WARN_ON_ONCE(!in_task() && !pagefault_disabled()) Peter suggested disabling page faults around __get_user_pages_fast(), which gets rid of the warning in access_ok() call. Suggested-by: Peter Zijlstra Signed-off-by: Jiri Olsa Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Link: https://lkml.kernel.org/r/20200407141427.3184722-1-jolsa@kernel.org Signed-off-by: Sasha Levin commit 65ba955b951701f63e928562787c868185ec2647 Author: James Smart Date: Sun Mar 22 11:12:54 2020 -0700 scsi: lpfc: Fix lockdep error - register non-static key [ Upstream commit f861f596714bed06069f1109b89e51f3855c4ddf ] The following lockdep error was reported when unloading the lpfc driver: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. ... Call Trace: dump_stack+0x96/0xe0 register_lock_class+0x8b8/0x8c0 ? lockdep_hardirqs_on+0x190/0x280 ? is_dynamic_key+0x150/0x150 ? wait_for_completion_interruptible+0x2a0/0x2a0 ? wake_up_q+0xd0/0xd0 __lock_acquire+0xda/0x21a0 ? register_lock_class+0x8c0/0x8c0 ? synchronize_rcu_expedited+0x500/0x500 ? __call_rcu+0x850/0x850 lock_acquire+0xf3/0x1f0 ? del_timer_sync+0x5/0xb0 del_timer_sync+0x3c/0xb0 ? del_timer_sync+0x5/0xb0 lpfc_pci_remove_one.cold.102+0x8b7/0x935 [lpfc] ... Unloading the driver resulted in a call to del_timer_sync for the cpuhp_poll_timer. However the call to setup the timer had never been made, so the timer structures used by lockdep checking were not initialized. Unconditionally call setup_timer for the cpuhp_poll_timer during driver initialization. Calls to start the timer remain "as needed". Link: https://lore.kernel.org/r/20200322181304.37655-3-jsmart2021@gmail.com Signed-off-by: James Smart Signed-off-by: Dick Kennedy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit f72354c004076473d0201ab90ea8f5e66f5039ee Author: James Smart Date: Sun Mar 22 11:13:00 2020 -0700 scsi: lpfc: Fix erroneous cpu limit of 128 on I/O statistics [ Upstream commit 840eda9602d30342486e85e7e96499f565572e4b ] The cpu io statistics were capped by a hard define limit of 128. This effectively was a max number of CPUs, not an actual CPU count, nor actual CPU numbers which can be even larger than both of those values. This made stats off/misleading and on large CPU count systems, wrong. Fix the stats so that all CPUs can have a stats struct. Fix the looping such that it loops by hdwq, finds CPUs that used the hdwq, and sum the stats, then display. Link: https://lore.kernel.org/r/20200322181304.37655-9-jsmart2021@gmail.com Signed-off-by: James Smart Signed-off-by: Dick Kennedy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c39618a4e2a625a27d8436e1a4e70b945f4a02e9 Author: Florian Fainelli Date: Mon Feb 3 13:35:35 2020 -0800 pwm: bcm2835: Dynamically allocate base [ Upstream commit 2c25b07e5ec119cab609e41407a1fb3fa61442f5 ] The newer 2711 and 7211 chips have two PWM controllers and failure to dynamically allocate the PWM base would prevent the second PWM controller instance being probed for succeeding with an -EEXIST error from alloc_pwms(). Fixes: e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver") Signed-off-by: Florian Fainelli Acked-by: Uwe Kleine-König Reviewed-by: Nicolas Saenz Julienne Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit e1ad50d457624af1f9704a4f7e163c9beed5da4f Author: Geert Uytterhoeven Date: Mon Mar 16 11:32:15 2020 +0100 pwm: renesas-tpu: Fix late Runtime PM enablement [ Upstream commit d5a3c7a4536e1329a758e14340efd0e65252bd3d ] Runtime PM should be enabled before calling pwmchip_add(), as PWM users can appear immediately after the PWM chip has been added. Likewise, Runtime PM should always be disabled after the removal of the PWM chip, even if the latter failed. Fixes: 99b82abb0a35b073 ("pwm: Add Renesas TPU PWM driver") Signed-off-by: Geert Uytterhoeven Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 51750ad35f266751e14d6c7e8839b85c8069e27f Author: Nick Bowler Date: Sat Mar 28 01:09:09 2020 -0400 nvme: fix compat address handling in several ioctls [ Upstream commit c95b708d5fa65b4e51f088ee077d127fd5a57b70 ] On a 32-bit kernel, the upper bits of userspace addresses passed via various ioctls are silently ignored by the nvme driver. However on a 64-bit kernel running a compat task, these upper bits are not ignored and are in fact required to be zero for the ioctls to work. Unfortunately, this difference matters. 32-bit smartctl submits the NVME_IOCTL_ADMIN_CMD ioctl with garbage in these upper bits because it seems the pointer value it puts into the nvme_passthru_cmd structure is sign extended. This works fine on 32-bit kernels but fails on a 64-bit one because (at least on my setup) the addresses smartctl uses are consistently above 2G. For example: # smartctl -x /dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.5.11] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Bad address Since changing 32-bit kernels to actually check all of the submitted address bits now would break existing userspace, this patch fixes the compat problem by explicitly zeroing the upper bits in the compat case. This enables 32-bit smartctl to work on a 64-bit kernel. Signed-off-by: Nick Bowler Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 6d534c4b68395c5b891519834a6d5f02a65b7627 Author: Ganesh Goudar Date: Fri Mar 20 16:31:19 2020 +0530 powerpc/pseries: Fix MCE handling on pseries [ Upstream commit a95a0a1654f16366360399574e10efd87e867b39 ] MCE handling on pSeries platform fails as recent rework to use common code for pSeries and PowerNV in machine check error handling tries to access per-cpu variables in realmode. The per-cpu variables may be outside the RMO region on pSeries platform and needs translation to be enabled for access. Just moving these per-cpu variable into RMO region did'nt help because we queue some work to workqueues in real mode, which again tries to touch per-cpu variables. Also fwnmi_release_errinfo() cannot be called when translation is not enabled. This patch fixes this by enabling translation in the exception handler when all required real mode handling is done. This change only affects the pSeries platform. Without this fix below kernel crash is seen on injecting SLB multihit: BUG: Unable to handle kernel data access on read at 0xc00000027b205950 Faulting instruction address: 0xc00000000003b7e0 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: mcetest_slb(OE+) af_packet(E) xt_tcpudp(E) ip6t_rpfilter(E) ip6t_REJECT(E) ipt_REJECT(E) xt_conntrack(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) ip6table_nat(E) ip6table_mangle(E) ip6table_raw(E) ip6table_security(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) xfs(E) ibmveth(E) vmx_crypto(E) gf128mul(E) uio_pdrv_genirq(E) uio(E) crct10dif_vpmsum(E) rtc_generic(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) raid6_pq(E) sr_mod(E) sd_mod(E) cdrom(E) ibmvscsi(E) scsi_transport_srp(E) crc32c_vpmsum(E) dm_mod(E) sg(E) scsi_mod(E) CPU: 34 PID: 8154 Comm: insmod Kdump: loaded Tainted: G OE 5.5.0-mahesh #1 NIP: c00000000003b7e0 LR: c0000000000f2218 CTR: 0000000000000000 REGS: c000000007dcb960 TRAP: 0300 Tainted: G OE (5.5.0-mahesh) MSR: 8000000000001003 CR: 28002428 XER: 20040000 CFAR: c0000000000f2214 DAR: c00000027b205950 DSISR: 40000000 IRQMASK: 0 GPR00: c0000000000f2218 c000000007dcbbf0 c000000001544800 c000000007dcbd70 GPR04: 0000000000000001 c000000007dcbc98 c008000000d00258 c0080000011c0000 GPR08: 0000000000000000 0000000300000003 c000000001035950 0000000003000048 GPR12: 000000027a1d0000 c000000007f9c000 0000000000000558 0000000000000000 GPR16: 0000000000000540 c008000001110000 c008000001110540 0000000000000000 GPR20: c00000000022af10 c00000025480fd70 c008000001280000 c00000004bfbb300 GPR24: c000000001442330 c00800000800000d c008000008000000 4009287a77000510 GPR28: 0000000000000000 0000000000000002 c000000001033d30 0000000000000001 NIP [c00000000003b7e0] save_mce_event+0x30/0x240 LR [c0000000000f2218] pseries_machine_check_realmode+0x2c8/0x4f0 Call Trace: Instruction dump: 3c4c0151 38429050 7c0802a6 60000000 fbc1fff0 fbe1fff8 f821ffd1 3d42ffaf 3fc2ffaf e98d0030 394a1150 3bdef530 <7d6a62aa> 1d2b0048 2f8b0063 380b0001 ---[ end trace 46fd63f36bbdd940 ]--- Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code") Reviewed-by: Mahesh Salgaonkar Reviewed-by: Nicholas Piggin Signed-off-by: Ganesh Goudar Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200320110119.10207-1-ganeshgr@linux.ibm.com Signed-off-by: Sasha Levin commit 088b06edafdf5604e2cfc0bb665312afaf130c49 Author: Nicholas Piggin Date: Thu Apr 2 22:04:01 2020 +1000 Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled" [ Upstream commit abc3fce76adbdfa8f87272c784b388cd20b46049 ] This reverts commit ebb37cf3ffd39fdb6ec5b07111f8bb2f11d92c5f. That commit does not play well with soft-masked irq state manipulations in idle, interrupt replay, and possibly others due to tracing code sometimes using irq_work_queue (e.g., in trace_hardirqs_on()). That can cause PACA_IRQ_DEC to become set when it is not expected, and be ignored or cleared or cause warnings. The net result seems to be missing an irq_work until the next timer interrupt in the worst case which is usually not going to be noticed, however it could be a long time if the tick is disabled, which is against the spirit of irq_work and might cause real problems. The idea is still solid, but it would need more work. It's not really clear if it would be worth added complexity, so revert this for now (not a straight revert, but replace with a comment explaining why we might see interrupts happening, and gives git blame something to find). Fixes: ebb37cf3ffd3 ("powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled") Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200402120401.1115883-1-npiggin@gmail.com Signed-off-by: Sasha Levin commit 5ca31d1b4dfe63bad9b894f3c10fd17e665dcbf5 Author: Evan Green Date: Fri Apr 3 16:43:04 2020 +0200 loop: Better discard support for block devices [ Upstream commit c52abf563049e787c1341cdf15c7dbe1bfbc951b ] If the backing device for a loop device is itself a block device, then mirror the "write zeroes" capabilities of the underlying block device into the loop device. Copy this capability into both max_write_zeroes_sectors and max_discard_sectors of the loop device. The reason for this is that REQ_OP_DISCARD on a loop device translates into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This presents a consistent interface for loop devices (that discarded data is zeroed), regardless of the backing device type of the loop device. There should be no behavior change for loop devices backed by regular files. This change fixes blktest block/003, and removes an extraneous error print in block/013 when testing on a loop device backed by a block device that does not support discard. Signed-off-by: Evan Green Reviewed-by: Gwendal Grignou Reviewed-by: Chaitanya Kulkarni [used updated version of Evan's comment in loop_config_discard()] [moved backingq to local scope, removed redundant braces] Signed-off-by: Andrzej Pietrasiewicz Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit e0f87c4e50fee7a0834e57a0f379ee75a5bd0982 Author: Cornelia Huck Date: Fri Mar 27 13:45:02 2020 +0100 s390/cio: avoid duplicated 'ADD' uevents [ Upstream commit 05ce3e53f375295c2940390b2b429e506e07655c ] The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The io_subchannel driver will do so when the associated ccw_device has been registered -- but unconditionally, so more ADD uevents will be generated if a subchannel has been unbound from the io_subchannel driver and later rebound. To fix this, only generate the ADD event if uevents were still suppressed for the device. Fixes: fa1a8c23eb7d ("s390: cio: Delay uevents for subchannels") Message-Id: <20200327124503.9794-2-cohuck@redhat.com> Reported-by: Boris Fiuczynski Reviewed-by: Peter Oberparleiter Reviewed-by: Boris Fiuczynski Signed-off-by: Cornelia Huck Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 8568b9ab29bf87daad419f4cd677c78a0f54f095 Author: Cornelia Huck Date: Fri Mar 27 13:45:03 2020 +0100 s390/cio: generate delayed uevent for vfio-ccw subchannels [ Upstream commit 2bc55eaeb88d30accfc1b6ac2708d4e4b81ca260 ] The common I/O layer delays the ADD uevent for subchannels and delegates generating this uevent to the individual subchannel drivers. The vfio-ccw I/O subchannel driver, however, did not do that, and will not generate an ADD uevent for subchannels that had not been bound to a different driver (or none at all, which also triggers the uevent). Generate the ADD uevent at the end of the probe function if uevents were still suppressed for the device. Message-Id: <20200327124503.9794-3-cohuck@redhat.com> Fixes: 63f1934d562d ("vfio: ccw: basic implementation for vfio_ccw driver") Reviewed-by: Eric Farman Signed-off-by: Cornelia Huck Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 6b97491e6ca7c1352aa6ffb1e4a18fc90d20e59d Author: Christoph Hellwig Date: Sat Apr 4 08:51:20 2020 +0200 block: fix busy device checking in blk_drop_partitions [ Upstream commit d3ef5536274faf89e626276b833be122a16bdb81 ] bd_super is only set by get_tree_bdev and mount_bdev, and thus not by other openers like btrfs or the XFS realtime and log devices, as well as block devices directly opened from user space. Check bd_openers instead. Fixes: 77032ca66f86 ("Return EBUSY from BLKRRPART for mounted whole-dev fs") Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit c95b20db7478707714e8c65a1bbb40632536f98d Author: Masahiro Yamada Date: Thu Mar 26 17:00:49 2020 +0900 lib/raid6/test: fix build on distros whose /bin/sh is not bash [ Upstream commit 06bd48b6cd97ef3889b68c8e09014d81dbc463f1 ] You can build a user-space test program for the raid6 library code, like this: $ cd lib/raid6/test $ make The command in $(shell ...) function is evaluated by /bin/sh by default. (or, you can specify the shell by passing SHELL= from command line) Currently '>&/dev/null' is used to sink both stdout and stderr. Because this code is bash-ism, it only works when /bin/sh is a symbolic link to bash (this is the case on RHEL etc.) This does not work on Ubuntu where /bin/sh is a symbolic link to dash. I see lots of /bin/sh: 1: Syntax error: Bad fd number and warning "your version of binutils lacks ... support" Replace it with portable '>/dev/null 2>&1'. Fixes: 4f8c55c5ad49 ("lib/raid6: build proper files on corresponding arch") Signed-off-by: Masahiro Yamada Acked-by: H. Peter Anvin (Intel) Reviewed-by: Jason A. Donenfeld Acked-by: Ingo Molnar Reviewed-by: Nick Desaulniers Signed-off-by: Sasha Levin commit dc899b1d4741a75ea055367b423f2de7e156f508 Author: Mauro Carvalho Chehab Date: Thu Apr 2 11:28:03 2020 +0200 kconfig: qconf: Fix a few alignment issues [ Upstream commit 60969f02f07ae1445730c7b293c421d179da729c ] There are a few items with wrong alignments. Solve them. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit b201ff06a3517263c60f2c9fd6ea63c0f0890ff1 Author: Vasily Averin Date: Fri Apr 10 14:34:13 2020 -0700 ipc/util.c: sysvipc_find_ipc() should increase position index [ Upstream commit 89163f93c6f969da5811af5377cc10173583123b ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin Signed-off-by: Andrew Morton Acked-by: Waiman Long Cc: Davidlohr Bueso Cc: Manfred Spraul Cc: Al Viro Cc: Ingo Molnar Cc: NeilBrown Cc: Peter Oberparleiter Cc: Steven Rostedt Link: http://lkml.kernel.org/r/b7a20945-e315-8bb0-21e6-3875c14a8494@virtuozzo.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit e875b36a7757b23041d22214c3af6937ec0e35fd Author: Eric Biggers Date: Fri Apr 10 14:33:53 2020 -0700 selftests: kmod: fix handling test numbers above 9 [ Upstream commit 6d573a07528308eb77ec072c010819c359bebf6e ] get_test_count() and get_test_enabled() were broken for test numbers above 9 due to awk interpreting a field specification like '$0010' as octal rather than decimal. Fix it by stripping the leading zeroes. Signed-off-by: Eric Biggers Signed-off-by: Andrew Morton Acked-by: Luis Chamberlain Cc: Alexei Starovoitov Cc: Greg Kroah-Hartman Cc: Jeff Vander Stoep Cc: Jessica Yu Cc: Kees Cook Cc: NeilBrown Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 72d3750a81c93c3c2a2c6b7b697dbdf806573fdc Author: Vasily Averin Date: Fri Apr 10 14:34:10 2020 -0700 kernel/gcov/fs.c: gcov_seq_next() should increase position index [ Upstream commit f4d74ef6220c1eda0875da30457bef5c7111ab06 ] If seq_file .next function does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin Signed-off-by: Andrew Morton Acked-by: Peter Oberparleiter Cc: Al Viro Cc: Davidlohr Bueso Cc: Ingo Molnar Cc: Manfred Spraul Cc: NeilBrown Cc: Steven Rostedt Cc: Waiman Long Link: http://lkml.kernel.org/r/f65c6ee7-bd00-f910-2f8a-37cc67e4ff88@virtuozzo.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 05efdd839cd322f53fe489cff3e1da53265fda7d Author: Kishon Vijay Abraham I Date: Mon Apr 6 10:58:36 2020 +0530 dma-direct: fix data truncation in dma_direct_get_required_mask() [ Upstream commit cdcda0d1f8f4ab84efe7cd9921c98364398aefd7 ] The upper 32-bit physical address gets truncated inadvertently when dma_direct_get_required_mask() invokes phys_to_dma_direct(). This results in dma_addressing_limited() return incorrect value when used in platforms with LPAE enabled. Fix it here by explicitly type casting 'max_pfn' to phys_addr_t in order to prevent overflow of intermediate value while evaluating '(max_pfn - 1) << PAGE_SHIFT'. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit c33b3b70763cf31fc597c949393f6395b6bdf766 Author: Isabel Zhang Date: Sun Apr 5 16:41:01 2020 -0400 drm/amd/display: Update stream adjust in dc_stream_adjust_vmin_vmax [ Upstream commit 346d8a0a3c91888a412c2735d69daa09c00f0203 ] [Why] After v_total_min and max are updated in vrr structure, the changes are not reflected in stream adjust. When these values are read from stream adjust it does not reflect the actual state of the system. [How] Set stream adjust values equal to vrr adjust values after vrr adjust values are updated. Signed-off-by: Isabel Zhang Reviewed-by: Alvin Lee Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 081aeed3b3af0d07d783c4b25fbe2d3f99032700 Author: Sagi Grimberg Date: Thu Apr 2 09:34:54 2020 -0700 nvme: fix deadlock caused by ANA update wrong locking [ Upstream commit 657f1975e9d9c880fa13030e88ba6cc84964f1db ] The deadlock combines 4 flows in parallel: - ns scanning (triggered from reconnect) - request timeout - ANA update (triggered from reconnect) - I/O coming into the mpath device (1) ns scanning triggers disk revalidation -> update disk info -> freeze queue -> but blocked, due to (2) (2) timeout handler reference the g_usage_counter - > but blocks in the transport .timeout() handler, due to (3) (3) the transport timeout handler (indirectly) calls nvme_stop_queue() -> which takes the (down_read) namespaces_rwsem - > but blocks, due to (4) (4) ANA update takes the (down_write) namespaces_rwsem -> calls nvme_mpath_set_live() -> which synchronize the ns_head srcu (see commit 504db087aacc) -> but blocks, due to (5) (5) I/O came into nvme_mpath_make_request -> took srcu_read_lock -> direct_make_request > blk_queue_enter -> but blocked, due to (1) ==> the request queue is under freeze -> deadlock. The fix is making ANA update take a read lock as the namespaces list is not manipulated, it is just the ns and ns->head that are being updated (which is protected with the ns->head lock). Fixes: 0d0b660f214dc ("nvme: add ANA support") Signed-off-by: Sagi Grimberg Reviewed-by: Keith Busch Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 1e2d643b17f1e2d9fd3ee8fbdb40634ad42cde07 Author: Hans de Goede Date: Thu Apr 2 20:53:57 2020 +0200 ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map() [ Upstream commit 81630dc042af998b9f58cd8e2c29dab9777ea176 ] sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some places it is called with the drv->lock mutex already held. So it must always be called with the mutex locked. This commit adds missing locking in the sst_set_be_modules() code-path. Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 42a19fd2e551ca5d9ac5272f19d845bf5d1c58c4 Author: Santosh Sivaraj Date: Tue Jan 14 11:10:51 2020 +0530 tools/test/nvdimm: Fix out of tree build [ Upstream commit 1f776799628139d0da47e710ad86eb58d987ff66 ] Out of tree build using make M=tools/test/nvdimm O=/tmp/build -C /tmp/build fails with the following error make: Entering directory '/tmp/build' CC [M] tools/testing/nvdimm/test/nfit.o linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory 19 | #include | ^~~~~~~~~~~ compilation terminated. That is because the kbuild file uses $(src) which points to tools/testing/nvdimm, $(srctree) correctly points to root of the linux source tree. Reported-by: Aneesh Kumar K.V Signed-off-by: Santosh Sivaraj Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org Signed-off-by: Dan Williams Signed-off-by: Sasha Levin commit 0d60c096f9e4a66cba8ce301db24ce13bb776df2 Author: Wu Bo Date: Tue Mar 24 15:58:50 2020 +0800 scsi: iscsi: Report unbind session event when the target has been removed [ Upstream commit 13e60d3ba287d96eeaf1deaadba51f71578119a3 ] If the daemon is restarted or crashes while logging out of a session, the unbind session event sent by the kernel is not processed and is lost. When the daemon starts again, the session can't be unbound because the daemon is waiting for the event message. However, the kernel has already logged out and the event will not be resent. When iscsid restart is complete, logout session reports error: Logging out of session [sid: 6, target: iqn.xxxxx, portal: xx.xx.xx.xx,3260] iscsiadm: Could not logout of [sid: 6, target: iscsiadm -m node iqn.xxxxx, portal: xx.xx.xx.xx,3260]. iscsiadm: initiator reported error (9 - internal error) iscsiadm: Could not logout of all requested sessions Make sure the unbind event is emitted. [mkp: commit desc and applied by hand since patch was mangled] Link: https://lore.kernel.org/r/4eab1771-2cb3-8e79-b31c-923652340e99@huawei.com Reviewed-by: Lee Duncan Signed-off-by: Wu Bo Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 9a08f817fd2b652fcb181f89928b4faba0c2aa92 Author: Stephan Gerhold Date: Mon Mar 30 19:52:10 2020 +0200 ASoC: qcom: q6asm-dai: Add SNDRV_PCM_INFO_BATCH flag [ Upstream commit 7f2430cda819a9ecb1df5a0f3ef4f1c20db3f811 ] At the moment, playing audio with PulseAudio with the qdsp6 driver results in distorted sound. It seems like its timer-based scheduling does not work properly with qdsp6 since setting tsched=0 in the PulseAudio configuration avoids the issue. Apparently this happens when the pointer() callback is not accurate enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop PulseAudio from using timer-based scheduling by default. According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html: The flag is being used in the sense explained in the previous audio meeting -- the data transfer granularity isn't fine enough but aligned to the period size (or less). q6asm-dai reports the position as multiple of prtd->pcm_count = snd_pcm_lib_period_bytes(substream) so it indeed just a multiple of the period size. Therefore adding the flag here seems appropriate and makes audio work out of the box. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by: Stephan Gerhold Reviewed-by: Srinivas Kandagatla Cc: Srinivas Kandagatla Link: https://lore.kernel.org/r/20200330175210.47518-1-stephan@gerhold.net Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b1458c16f4e26e87492e58e4d24a1873bd09232a Author: Sagi Grimberg Date: Mon Mar 23 15:06:30 2020 -0700 nvme-tcp: fix possible crash in write_zeroes processing [ Upstream commit 25e5cb780e62bde432b401f312bb847edc78b432 ] We cannot look at blk_rq_payload_bytes without first checking that the request has a mappable physical segments first (e.g. blk_rq_nr_phys_segments(rq) != 0) and only then to take the request payload bytes. This caused us to send a wrong sgl to the target or even dereference a non-existing buffer in case we actually got to the data send sequence (if it was in-capsule). Reported-by: Tony Asleson Suggested-by: Chaitanya Kulkarni Signed-off-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit e8618a4d9bbb665d724dbb9ca71cf27c8fc0d3d5 Author: Geert Uytterhoeven Date: Mon Mar 16 11:32:14 2020 +0100 pwm: rcar: Fix late Runtime PM enablement [ Upstream commit 1451a3eed24b5fd6a604683f0b6995e0e7e16c79 ] Runtime PM should be enabled before calling pwmchip_add(), as PWM users can appear immediately after the PWM chip has been added. Likewise, Runtime PM should be disabled after the removal of the PWM chip. Fixes: ed6c1476bf7f16d5 ("pwm: Add support for R-Car PWM Timer") Signed-off-by: Geert Uytterhoeven Reviewed-by: Uwe Kleine-König Reviewed-by: Laurent Pinchart Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit eb9f6099f0ac4182d9b5d342ae2ac18c514999cd Author: Uwe Kleine-König Date: Sun Feb 9 22:31:06 2020 +0100 pwm: imx27: Fix clock handling in pwm_imx27_apply() [ Upstream commit 15d4dbd601591858611184f9ddeb5bf21569159c ] pwm_imx27_apply() enables the clocks if the previous PWM state was disabled. Given that the clocks are supposed to be left on iff the PWM is running, the decision to disable the clocks at the end of the function must not depend on the previous state. Without this fix the enable count of the two affected clocks increases by one whenever ->apply() changes from one disabled state to another. Fixes: bd88d319abe9 ("pwm: imx27: Unconditionally write state to hardware") Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 9669690ebfe6b00528715ea29dddfbfb6f068606 Author: Yan, Zheng Date: Tue Mar 10 19:34:20 2020 +0800 ceph: don't skip updating wanted caps when cap is stale [ Upstream commit 0aa971b6fd3f92afef6afe24ef78d9bb14471519 ] 1. try_get_cap_refs() fails to get caps and finds that mds_wanted does not include what it wants. It returns -ESTALE. 2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds that inode has cap, so it calls ceph_check_caps(). 3. ceph_check_caps() finds that issued caps (without checking if it's stale) already includes caps wanted by open file, so it skips updating wanted caps. Above events can cause an infinite loop inside ceph_get_caps(). Signed-off-by: "Yan, Zheng" Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit b2add47e6024058c5622be9e10913a5ea9f92c44 Author: Qiujun Huang Date: Fri Mar 6 09:34:20 2020 +0800 ceph: return ceph_mdsc_do_request() errors from __get_parent() [ Upstream commit c6d50296032f0b97473eb2e274dc7cc5d0173847 ] Return the error returned by ceph_mdsc_do_request(). Otherwise, r_target_inode ends up being NULL this ends up returning ENOENT regardless of the error. Signed-off-by: Qiujun Huang Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit 126ca67aa6e9aa72c06617c0b1628ea82f555ce6 Author: Javed Hasan Date: Thu Mar 26 23:02:07 2020 -0700 scsi: libfc: If PRLI rejected, move rport to PLOGI state [ Upstream commit 45e544bfdab2014d11c7595b8ccc3c4715a09015 ] If PRLI reject code indicates "rejected status", move rport state machine back to PLOGI state. Link: https://lore.kernel.org/r/20200327060208.17104-2-skashyap@marvell.com Signed-off-by: Javed Hasan Signed-off-by: Saurav Kashyap Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 8c9b4e50448ca718fe7ebb7265653eaeb6498578 Author: James Smart Date: Sun Mar 22 11:12:59 2020 -0700 scsi: lpfc: Fix crash in target side cable pulls hitting WAIT_FOR_UNREG [ Upstream commit 807e7353d8a7105ce884d22b0dbc034993c6679c ] Kernel is crashing with the following stacktrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000005bc IP: lpfc_nvme_register_port+0x1a8/0x3a0 [lpfc] ... Call Trace: lpfc_nlp_state_cleanup+0x2b2/0x500 [lpfc] lpfc_nlp_set_state+0xd7/0x1a0 [lpfc] lpfc_cmpl_prli_prli_issue+0x1f7/0x450 [lpfc] lpfc_disc_state_machine+0x7a/0x1e0 [lpfc] lpfc_cmpl_els_prli+0x16f/0x1e0 [lpfc] lpfc_sli_sp_handle_rspiocb+0x5b2/0x690 [lpfc] lpfc_sli_handle_slow_ring_event_s4+0x182/0x230 [lpfc] lpfc_do_work+0x87f/0x1570 [lpfc] kthread+0x10d/0x130 ret_from_fork+0x35/0x40 During target side fault injections, it is possible to hit the NLP_WAIT_FOR_UNREG case in lpfc_nvme_remoteport_delete. A prior commit fixed a rebind and delete race condition, but called lpfc_nlp_put unconditionally. This triggered a deletion and the crash. Fix by movng nlp_put to inside the NLP_WAIT_FOR_UNREG case, where the nlp will be being unregistered/removed. Leave the reference if the flag isn't set. Link: https://lore.kernel.org/r/20200322181304.37655-8-jsmart2021@gmail.com Fixes: b15bd3e6212e ("scsi: lpfc: Fix nvme remoteport registration race conditions") Signed-off-by: James Smart Signed-off-by: Dick Kennedy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit a7537845afc06b5c9f94d75a13af04017f390421 Author: James Smart Date: Sun Mar 22 11:12:57 2020 -0700 scsi: lpfc: Fix crash after handling a pci error [ Upstream commit 4cd70891308dfb875ef31060c4a4aa8872630a2e ] Injecting EEH on a 32GB card is causing kernel oops The pci error handler is doing an IO flush and the offline code is also doing an IO flush. When the 1st flush is complete the hdwq is destroyed (freed), yet the second flush accesses the hdwq and crashes. Added a check in lpfc_sli4_fush_io_rings to check both the HBA_IOQ_FLUSH flag and the hdwq pointer to see if it is already set and not already freed. Link: https://lore.kernel.org/r/20200322181304.37655-6-jsmart2021@gmail.com Signed-off-by: James Smart Signed-off-by: Dick Kennedy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 96caee8aa5dc03ae7b24578b4c40b4de96a98460 Author: Dave Chinner Date: Tue Mar 24 20:10:28 2020 -0700 xfs: correctly acount for reclaimable slabs [ Upstream commit d59eadaea2b9945095d4d6d44367ebabd604395c ] The XFS inode item slab actually reclaimed by inode shrinker callbacks from the memory reclaim subsystem. These should be marked as reclaimable so the mm subsystem has the full picture of how much memory it can actually reclaim from the XFS slab caches. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Allison Collins Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Sasha Levin commit 1447481dbc2111f4b03385ceac3847607b280ac8 Author: James Smart Date: Sun Mar 22 11:12:53 2020 -0700 scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_login [ Upstream commit 38503943c89f0bafd9e3742f63f872301d44cbea ] The following kasan bug was called out: BUG: KASAN: slab-out-of-bounds in lpfc_unreg_login+0x7c/0xc0 [lpfc] Read of size 2 at addr ffff889fc7c50a22 by task lpfc_worker_3/6676 ... Call Trace: dump_stack+0x96/0xe0 ? lpfc_unreg_login+0x7c/0xc0 [lpfc] print_address_description.constprop.6+0x1b/0x220 ? lpfc_unreg_login+0x7c/0xc0 [lpfc] ? lpfc_unreg_login+0x7c/0xc0 [lpfc] __kasan_report.cold.9+0x37/0x7c ? lpfc_unreg_login+0x7c/0xc0 [lpfc] kasan_report+0xe/0x20 lpfc_unreg_login+0x7c/0xc0 [lpfc] lpfc_sli_def_mbox_cmpl+0x334/0x430 [lpfc] ... When processing the completion of a "Reg Rpi" login mailbox command in lpfc_sli_def_mbox_cmpl, a call may be made to lpfc_unreg_login. The vpi is extracted from the completing mailbox context and passed as an input for the next. However, the vpi stored in the mailbox command context is an absolute vpi, which for SLI4 represents both base + offset. When used with a non-zero base component, (function id > 0) this results in an out-of-range access beyond the allocated phba->vpi_ids array. Fix by subtracting the function's base value to get an accurate vpi number. Link: https://lore.kernel.org/r/20200322181304.37655-2-jsmart2021@gmail.com Signed-off-by: James Smart Signed-off-by: Dick Kennedy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 8d9ab39a55ee2b42fdc6ebeb8e87eb5e401736c2 Author: Tero Kristo Date: Thu Mar 12 11:58:06 2020 +0200 watchdog: reset last_hw_keepalive time at start [ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ] Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by: Tero Kristo Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin commit 17d0f4e06395ab8c8edb221e30e8f71766a73ef3 Author: Jan Kara Date: Thu Jan 23 16:47:20 2020 +0100 tools/testing/nvdimm: Fix compilation failure without CONFIG_DEV_DAX_PMEM_COMPAT [ Upstream commit c0e71d602053e4e7637e4bc7d0bc9603ea77a33f ] When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the compilation of tools/testing/nvdimm fails with: Building modules, stage 2. MODPOST 11 modules ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined! Fix the problem by calling dax_pmem_compat_test() only if the kernel has the required functionality. Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20200123154720.12097-1-jack@suse.cz Signed-off-by: Dan Williams Signed-off-by: Sasha Levin commit 7f4be3c45ce1c1a3f3ff7ff46f9f3b0f3fd48b78 Author: Linus Torvalds Date: Fri Apr 24 11:10:58 2020 -0700 mm: check that mm is still valid in madvise() [ Upstream commit bc0c4d1e176eeb614dc8734fc3ace34292771f11 ] IORING_OP_MADVISE can end up basically doing mprotect() on the VM of another process, which means that it can race with our crazy core dump handling which accesses the VM state without holding the mmap_sem (because it incorrectly thinks that it is the final user). This is clearly a core dumping problem, but we've never fixed it the right way, and instead have the notion of "check that the mm is still ok" using mmget_still_valid() after getting the mmap_sem for writing in any situation where we're not the original VM thread. See commit 04f5866e41fb ("coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping") for more background on this whole mmget_still_valid() thing. You might want to have a barf bag handy when you do. We're discussing just fixing this properly in the only remaining core dumping routines. But even if we do that, let's make do_madvise() do the right thing, and then when we fix core dumping, we can remove all these mmget_still_valid() checks. Reported-and-tested-by: Jann Horn Fixes: c1ca757bd6f4 ("io_uring: add IORING_OP_MADVISE") Acked-by: Jens Axboe Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 55b2af1c23eb12663015998079992f79fdfa56c8 Author: Greg Kroah-Hartman Date: Thu Apr 23 10:38:27 2020 +0200 Linux 5.6.7 commit 2dfbb9f2244fb14245fe3ba3ada014e202663885 Author: Juergen Gross Date: Thu Apr 9 09:00:01 2020 +0200 x86/xen: fix booting 32-bit pv guest commit d6f34f4c6b4a962eb7a86c923fea206f866a40be upstream. Commit 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable") introduced a regression for booting 32 bit Xen PV guests: the address of the initial stack needs to be a virtual one. Fixes: 2f62f36e62daec ("x86/xen: Make the boot CPU idle task reliable") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20200409070001.16675-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman commit 34e0de3be874b393de988e72005192c5a1b0ff87 Author: Daniel Borkmann Date: Tue Apr 21 15:01:52 2020 +0200 bpf, test_verifier: switch bpf_get_stack's 0 s> r8 test [ no upstream commit ] Switch the comparison, so that is_branch_taken() will recognize that below branch is never taken: [...] 17: [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] 17: (67) r8 <<= 32 18: [...] R8_w=inv(id=0,smax_value=-4294967296,umin_value=9223372036854775808,umax_value=18446744069414584320,var_off=(0x8000000000000000; 0x7fffffff00000000)) [...] 18: (c7) r8 s>>= 32 19: [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] 19: (6d) if r1 s> r8 goto pc+16 [...] R1_w=inv0 [...] R8_w=inv(id=0,smin_value=-2147483648,smax_value=-1,umin_value=18446744071562067968,var_off=(0xffffffff80000000; 0x7fffffff)) [...] [...] Currently we check for is_branch_taken() only if either K is source, or source is a scalar value that is const. For upstream it would be good to extend this properly to check whether dst is const and src not. For the sake of the test_verifier, it is probably not needed here: # ./test_verifier 101 #101/p bpf_get_stack return R0 within range OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED I haven't seen this issue in test_progs* though, they are passing fine: # ./test_progs-no_alu32 -t get_stack Switching to flavor 'no_alu32' subdirectory... #20 get_stack_raw_tp:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t get_stack #20 get_stack_raw_tp:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: John Fastabend Signed-off-by: Greg Kroah-Hartman commit af06d90741d0fc57fc10bc05c1340f6bfa3864c1 Author: John Fastabend Date: Mon Mar 30 14:37:19 2020 -0700 bpf: Test_progs, add test to catch retval refine error handling commit d2db08c7a14e0b5eed6132baf258b80622e041a9 upstream. Before this series the verifier would clamp return bounds of bpf_get_stack() to [0, X] and this led the verifier to believe that a JMP_JSLT 0 would be false and so would prune that path. The result is anything hidden behind that JSLT would be unverified. Add a test to catch this case by hiding an goto pc-1 behind the check which will cause an infinite loop if not rejected. Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman commit 8389a64c68e236e2b777409e97f1f077cfba9057 Author: John Fastabend Date: Mon Mar 30 14:37:40 2020 -0700 bpf: Test_verifier, bpf_get_stack return value add <0 commit 9ac26e9973bac5716a2a542e32f380c84db2b88c upstream. With current ALU32 subreg handling and retval refine fix from last patches we see an expected failure in test_verifier. With verbose verifier state being printed at each step for clarity we have the following relavent lines [I omit register states that are not necessarily useful to see failure cause], #101/p bpf_get_stack return R0 within range FAIL Failed to load prog 'Success'! [..] 14: (85) call bpf_get_stack#67 R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0) R3_w=inv48 15: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) 15: (b7) r1 = 0 16: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 16: (bf) r8 = r0 17: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) 17: (67) r8 <<= 32 18: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smax_value=9223372032559808512, umax_value=18446744069414584320, var_off=(0x0; 0xffffffff00000000), s32_min_value=0, s32_max_value=0, u32_max_value=0, var32_off=(0x0; 0x0)) 18: (c7) r8 s>>= 32 19 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=2147483647, var32_off=(0x0; 0xffffffff)) 19: (cd) if r1 s< r8 goto pc+16 R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=0, var32_off=(0x0; 0xffffffff)) 20: R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff)) R1_w=inv0 R8_w=inv(id=0,smin_value=-2147483648, smax_value=0, R9=inv48 20: (1f) r9 -= r8 21: (bf) r2 = r7 22: R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0) 22: (0f) r2 += r8 value -2147483648 makes map_value pointer be out of bounds After call bpf_get_stack() on line 14 and some moves we have at line 16 an r8 bound with max_value 48 but an unknown min value. This is to be expected bpf_get_stack call can only return a max of the input size but is free to return any negative error in the 32-bit register space. The C helper is returning an int so will use lower 32-bits. Lines 17 and 18 clear the top 32 bits with a left/right shift but use ARSH so we still have worst case min bound before line 19 of -2147483648. At this point the signed check 'r1 s< r8' meant to protect the addition on line 22 where dst reg is a map_value pointer may very well return true with a large negative number. Then the final line 22 will detect this as an invalid operation and fail the program. What we want to do is proceed only if r8 is positive non-error. So change 'r1 s< r8' to 'r1 s> r8' so that we jump if r8 is negative. Next we will throw an error because we access past the end of the map value. The map value size is 48 and sizeof(struct test_val) is 48 so we walk off the end of the map value on the second call to get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to 24 by using 'sizeof(struct test_val) / 2'. After this everything passes as expected. Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower Signed-off-by: Greg Kroah-Hartman commit 311e070b089c2885b81450bd45764f7331b2809b Author: Daniel Borkmann Date: Tue Apr 21 15:01:49 2020 +0200 bpf: fix buggy r0 retval refinement for tracing helpers [ no upstream commit ] See the glory details in 100605035e15 ("bpf: Verifier, do_refine_retval_range may clamp umin to 0 incorrectly") for why 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") is buggy. The whole series however is not suitable for stable since it adds significant amount [0] of verifier complexity in order to add 32bit subreg tracking. Something simpler is needed. Unfortunately, reverting 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") or just cherry-picking 100605035e15 ("bpf: Verifier, do_refine_retval_range may clamp umin to 0 incorrectly") is not an option since it will break existing tracing programs badly (at least those that are using bpf_get_stack() and bpf_probe_read_str() helpers). Not fixing it in stable is also not an option since on 4.19 kernels an error will cause a soft-lockup due to hitting dead-code sanitized branch since we don't hard-wire such branches in old kernels yet. But even then for 5.x 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") would cause wrong bounds on the verifier simluation when an error is hit. In one of the earlier iterations of mentioned patch series for upstream there was the concern that just using smax_value in do_refine_retval_range() would nuke bounds by subsequent <<32 >>32 shifts before the comparison against 0 [1] which eventually led to the 32bit subreg tracking in the first place. While I initially went for implementing the idea [1] to pattern match the two shift operations, it turned out to be more complex than actually needed, meaning, we could simply treat do_refine_retval_range() similarly to how we branch off verification for conditionals or under speculation, that is, pushing a new reg state to the stack for later verification. This means, instead of verifying the current path with the ret_reg in [S32MIN, msize_max_value] interval where later bounds would get nuked, we split this into two: i) for the success case where ret_reg can be in [0, msize_max_value], and ii) for the error case with ret_reg known to be in interval [S32MIN, -1]. Latter will preserve the bounds during these shift patterns and can match reg < 0 test. test_progs also succeed with this approach. [0] https://lore.kernel.org/bpf/158507130343.15666.8018068546764556975.stgit@john-Precision-5820-Tower/ [1] https://lore.kernel.org/bpf/158015334199.28573.4940395881683556537.stgit@john-XPS-13-9370/T/#m2e0ad1d5949131014748b6daa48a3495e7f0456d Fixes: 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper") Reported-by: Lorenzo Fontana Reported-by: Leonardo Di Donato Reported-by: John Fastabend Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Acked-by: John Fastabend Tested-by: John Fastabend Signed-off-by: Greg Kroah-Hartman commit 212d3adb1af4e34acb158d6c6def370016a1011d Author: Waiman Long Date: Sat Mar 21 21:11:24 2020 -0400 KEYS: Don't write out to userspace while holding key semaphore commit d3ec10aa95819bff18a0d936b18884c7816d0914 upstream. A lockdep circular locking dependency report was seen when running a keyutils test: [12537.027242] ====================================================== [12537.059309] WARNING: possible circular locking dependency detected [12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE --------- - - [12537.125253] ------------------------------------------------------ [12537.153189] keyctl/25598 is trying to acquire lock: [12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0 [12537.208365] [12537.208365] but task is already holding lock: [12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12537.270476] [12537.270476] which lock already depends on the new lock. [12537.270476] [12537.307209] [12537.307209] the existing dependency chain (in reverse order) is: [12537.340754] [12537.340754] -> #3 (&type->lock_class){++++}: [12537.367434] down_write+0x4d/0x110 [12537.385202] __key_link_begin+0x87/0x280 [12537.405232] request_key_and_link+0x483/0xf70 [12537.427221] request_key+0x3c/0x80 [12537.444839] dns_query+0x1db/0x5a5 [dns_resolver] [12537.468445] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.496731] cifs_reconnect+0xe04/0x2500 [cifs] [12537.519418] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.546263] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.573551] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.601045] kthread+0x30c/0x3d0 [12537.617906] ret_from_fork+0x3a/0x50 [12537.636225] [12537.636225] -> #2 (root_key_user.cons_lock){+.+.}: [12537.664525] __mutex_lock+0x105/0x11f0 [12537.683734] request_key_and_link+0x35a/0xf70 [12537.705640] request_key+0x3c/0x80 [12537.723304] dns_query+0x1db/0x5a5 [dns_resolver] [12537.746773] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.775607] cifs_reconnect+0xe04/0x2500 [cifs] [12537.798322] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.823369] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.847262] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.873477] kthread+0x30c/0x3d0 [12537.890281] ret_from_fork+0x3a/0x50 [12537.908649] [12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}: [12537.935225] __mutex_lock+0x105/0x11f0 [12537.954450] cifs_call_async+0x102/0x7f0 [cifs] [12537.977250] smb2_async_readv+0x6c3/0xc90 [cifs] [12538.000659] cifs_readpages+0x120a/0x1e50 [cifs] [12538.023920] read_pages+0xf5/0x560 [12538.041583] __do_page_cache_readahead+0x41d/0x4b0 [12538.067047] ondemand_readahead+0x44c/0xc10 [12538.092069] filemap_fault+0xec1/0x1830 [12538.111637] __do_fault+0x82/0x260 [12538.129216] do_fault+0x419/0xfb0 [12538.146390] __handle_mm_fault+0x862/0xdf0 [12538.167408] handle_mm_fault+0x154/0x550 [12538.187401] __do_page_fault+0x42f/0xa60 [12538.207395] do_page_fault+0x38/0x5e0 [12538.225777] page_fault+0x1e/0x30 [12538.243010] [12538.243010] -> #0 (&mm->mmap_sem){++++}: [12538.267875] lock_acquire+0x14c/0x420 [12538.286848] __might_fault+0x119/0x1b0 [12538.306006] keyring_read_iterator+0x7e/0x170 [12538.327936] assoc_array_subtree_iterate+0x97/0x280 [12538.352154] keyring_read+0xe9/0x110 [12538.370558] keyctl_read_key+0x1b9/0x220 [12538.391470] do_syscall_64+0xa5/0x4b0 [12538.410511] entry_SYSCALL_64_after_hwframe+0x6a/0xdf [12538.435535] [12538.435535] other info that might help us debug this: [12538.435535] [12538.472829] Chain exists of: [12538.472829] &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class [12538.472829] [12538.524820] Possible unsafe locking scenario: [12538.524820] [12538.551431] CPU0 CPU1 [12538.572654] ---- ---- [12538.595865] lock(&type->lock_class); [12538.613737] lock(root_key_user.cons_lock); [12538.644234] lock(&type->lock_class); [12538.672410] lock(&mm->mmap_sem); [12538.687758] [12538.687758] *** DEADLOCK *** [12538.687758] [12538.714455] 1 lock held by keyctl/25598: [12538.732097] #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12538.770573] [12538.770573] stack backtrace: [12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G [12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015 [12538.881963] Call Trace: [12538.892897] dump_stack+0x9a/0xf0 [12538.907908] print_circular_bug.isra.25.cold.50+0x1bc/0x279 [12538.932891] ? save_trace+0xd6/0x250 [12538.948979] check_prev_add.constprop.32+0xc36/0x14f0 [12538.971643] ? keyring_compare_object+0x104/0x190 [12538.992738] ? check_usage+0x550/0x550 [12539.009845] ? sched_clock+0x5/0x10 [12539.025484] ? sched_clock_cpu+0x18/0x1e0 [12539.043555] __lock_acquire+0x1f12/0x38d0 [12539.061551] ? trace_hardirqs_on+0x10/0x10 [12539.080554] lock_acquire+0x14c/0x420 [12539.100330] ? __might_fault+0xc4/0x1b0 [12539.119079] __might_fault+0x119/0x1b0 [12539.135869] ? __might_fault+0xc4/0x1b0 [12539.153234] keyring_read_iterator+0x7e/0x170 [12539.172787] ? keyring_read+0x110/0x110 [12539.190059] assoc_array_subtree_iterate+0x97/0x280 [12539.211526] keyring_read+0xe9/0x110 [12539.227561] ? keyring_gc_check_iterator+0xc0/0xc0 [12539.249076] keyctl_read_key+0x1b9/0x220 [12539.266660] do_syscall_64+0xa5/0x4b0 [12539.283091] entry_SYSCALL_64_after_hwframe+0x6a/0xdf One way to prevent this deadlock scenario from happening is to not allow writing to userspace while holding the key semaphore. Instead, an internal buffer is allocated for getting the keys out from the read method first before copying them out to userspace without holding the lock. That requires taking out the __user modifier from all the relevant read methods as well as additional changes to not use any userspace write helpers. That is, 1) The put_user() call is replaced by a direct copy. 2) The copy_to_user() call is replaced by memcpy(). 3) All the fault handling code is removed. Compiling on a x86-64 system, the size of the rxrpc_read() function is reduced from 3795 bytes to 2384 bytes with this patch. Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen Signed-off-by: Waiman Long Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman commit ce2a7dc84beeee70d429922ce0ccd1cc158c5683 Author: Wen Yang Date: Wed Mar 18 23:31:56 2020 +0800 mtd: phram: fix a double free issue in error path commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream. The variable 'name' is released multiple times in the error path, which may cause double free issues. This problem is avoided by adding a goto label to release the memory uniformly. And this change also makes the code a bit more cleaner. Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup") Signed-off-by: Wen Yang Cc: Joern Engel Cc: Miquel Raynal Cc: Richard Weinberger Cc: Vignesh Raghavendra Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman commit f752144572ff71ef56809a0cf87a8797f2fd425f Author: Dan Carpenter Date: Fri Feb 28 12:25:54 2020 +0300 mtd: lpddr: Fix a double free in probe() commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream. This function is only called from lpddr_probe(). We free "lpddr" both here and in the caller, so it's a double free. The best place to free "lpddr" is in lpddr_probe() so let's delete this one. Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.") Signed-off-by: Dan Carpenter Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain Signed-off-by: Greg Kroah-Hartman commit 93814a21a812b9ce10296a5e2be16a568d857c4d Author: Jonathan Neuschäfer Date: Tue Feb 18 16:02:19 2020 +0100 docs: Fix path to MTD command line partition parser commit fb2511247dc4061fd122d0195838278a4a0b7b59 upstream. cmdlinepart.c has been moved to drivers/mtd/parsers/. Fixes: a3f12a35c91d ("mtd: parsers: Move CMDLINE parser") Signed-off-by: Jonathan Neuschäfer Signed-off-by: Jonathan Corbet Signed-off-by: Greg Kroah-Hartman commit beb316bf97cd7d42d9b40dcc53de5bdd30216050 Author: Frieder Schrempf Date: Tue Feb 18 10:05:25 2020 +0000 mtd: spinand: Explicitly use MTD_OPS_RAW to write the bad block marker to OOB commit 621a7b780bd8b7054647d53d5071961f2c9e0873 upstream. When writing the bad block marker to the OOB area the access mode should be set to MTD_OPS_RAW as it is done for reading the marker. Currently this only works because req.mode is initialized to MTD_OPS_PLACE_OOB (0) and spinand_write_to_cache_op() checks for req.mode != MTD_OPS_AUTO_OOB. Fix this by explicitly setting req.mode to MTD_OPS_RAW. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Frieder Schrempf Reviewed-by: Boris Brezillon Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-3-frieder.schrempf@kontron.de Signed-off-by: Greg Kroah-Hartman commit 09766d7091c5193df8fd9852fe836fc67ef0d554 Author: Christophe Kerello Date: Thu Jan 23 09:22:48 2020 +0100 mtd: rawnand: free the nand_device object commit 009264605cdf1b12962c3a46f75818d05452e890 upstream. This patch releases the resources allocated in nanddev_init function. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: Christophe Kerello Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/1579767768-32295-1-git-send-email-christophe.kerello@st.com Signed-off-by: Greg Kroah-Hartman commit d940415b0733791b986444594299c3cc4545f2c8 Author: Paul E. McKenney Date: Thu Jan 23 09:19:01 2020 -0800 locktorture: Print ratio of acquisitions, not failures commit 80c503e0e68fbe271680ab48f0fe29bc034b01b7 upstream. The __torture_print_stats() function in locktorture.c carefully initializes local variable "min" to statp[0].n_lock_acquired, but then compares it to statp[i].n_lock_fail. Given that the .n_lock_fail field should normally be zero, and given the initialization, it seems reasonable to display the maximum and minimum number acquisitions instead of miscomputing the maximum and minimum number of failures. This commit therefore switches from failures to acquisitions. And this turns out to be not only a day-zero bug, but entirely my own fault. I hate it when that happens! Fixes: 0af3fe1efa53 ("locktorture: Add a lock-torture kernel module") Reported-by: Will Deacon Signed-off-by: Paul E. McKenney Acked-by: Will Deacon Cc: Davidlohr Bueso Cc: Josh Triplett Cc: Peter Zijlstra Signed-off-by: Greg Kroah-Hartman commit f05e96fcc81b62e74cfb4de5fd42ddd15ccbbc75 Author: Colin Ian King Date: Tue Jan 21 16:17:57 2020 +0000 iio: st_sensors: handle memory allocation failure to fix null pointer dereference commit 9960c70949d4356abed8747a20637e0946bb0bad upstream. A null pointer deference on pdata can occur if the allocation of pdata fails. Fix this by adding a null pointer check and handle the -ENOMEM failure in the caller. Addresses-Coverity: ("Dereference null return value") Fixes: 3ce85cc4fbb7 ("iio: st_sensors: get platform data from device tree") Signed-off-by: Colin Ian King Reviewed-by: Linus Walleij Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 50167bd50b7896ef34e2b783f6f1bcca1eda776e Author: Stephen Rothwell Date: Thu Jan 9 18:39:12 2020 +1100 tty: evh_bytechan: Fix out of bounds accesses commit 3670664b5da555a2a481449b3baafff113b0ac35 upstream. ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by: Stephen Rothwell Tested-by: Laurentiu Tudor [mpe: Trim warnings from change log] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200109183912.5fcb52aa@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman commit 6fa3e48e68528cafbce3a0c68b0f4069f2c26438 Author: Nathan Chancellor Date: Tue Dec 17 20:00:25 2019 -0700 fbmem: Adjust indentation in fb_prepare_logo and fb_blank commit 93166f5f2e4dc593cff8ca77ef828ac6f148b0f3 upstream. Clang warns: ../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] if (fb_logo.depth > 4 && depth > 4) { ^ ../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is here else ^ ../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return ret; ^ ../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is here if (!ret) ^ 2 warnings generated. This warning occurs because there are spaces before the tabs on these lines. Normalize the indentation in these functions so that it is consistent with the Linux kernel coding style and clang no longer warns. Fixes: 1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth") Link: https://github.com/ClangBuiltLinux/linux/issues/825 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Bartlomiej Zolnierkiewicz Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com Signed-off-by: Greg Kroah-Hartman commit 47c00f107f5eed40e129e27d3b4c2e8fd52d75e5 Author: Maxime Roussin-Bélanger Date: Wed Feb 19 12:40:08 2020 -0500 iio: si1133: read 24-bit signed integer for measurement commit 328b50e9a0ad1fe8accdf8c19923deebab5e0c01 upstream. The chip is configured in 24 bit mode. The values read from it must always be treated as is. This fixes the issue by replacing the previous 16 bits value by a 24 bits buffer. This changes affects the value output by previous version of the driver, since the least significant byte was missing. The upper half of 16 bit values previously output are now the upper half of a 24 bit value. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: Simon Goyette Co-authored-by: Guillaume Champagne Signed-off-by: Maxime Roussin-Bélanger Signed-off-by: Guillaume Champagne Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 1a7074e27f7d72585d78542641a55076168cda97 Author: Jernej Skrabec Date: Sat Jan 25 00:20:09 2020 +0100 ARM: dts: sunxi: Fix DE2 clocks register range commit da180322582bd9db07f29e6d4a2d170afde0703f upstream. As it can be seen from DE2 manual, clock range is 0x10000. Fix it. Signed-off-by: Jernej Skrabec Fixes: 73f122c82775 ("ARM: dts: sun8i: a83t: Add display pipeline") Fixes: 05a43a262d03 ("ARM: dts: sun8i: r40: Add HDMI pipeline") Fixes: 21b299209330 ("ARM: sun8i: v3s: add device nodes for DE2 display pipeline") Fixes: d8c6f1f0295c ("ARM: sun8i: h3/h5: add DE2 CCU device node for H3") [wens@csie.org: added fixes tags] Signed-off-by: Chen-Yu Tsai Signed-off-by: Greg Kroah-Hartman commit de095fa19cacd22760e74b5f5e1321c0b4c45d39 Author: Dan Carpenter Date: Mon Jan 13 14:08:14 2020 +0300 fbdev: potential information leak in do_fb_ioctl() commit d3d19d6fc5736a798b118971935ce274f7deaa82 upstream. The "fix" struct has a 2 byte hole after ->ywrapstep and the "fix = info->fix;" assignment doesn't necessarily clear it. It depends on the compiler. The solution is just to replace the assignment with an memcpy(). Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held") Signed-off-by: Dan Carpenter Cc: Andrew Morton Cc: Arnd Bergmann Cc: "Eric W. Biederman" Cc: Andrea Righi Cc: Daniel Vetter Cc: Sam Ravnborg Cc: Maarten Lankhorst Cc: Daniel Thompson Cc: Peter Rosin Cc: Jani Nikula Cc: Gerd Hoffmann Signed-off-by: Bartlomiej Zolnierkiewicz Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain Signed-off-by: Greg Kroah-Hartman commit 4b041c16eef495af3a6256f4f2f097ead5605336 Author: Grygorii Strashko Date: Wed Apr 8 22:43:00 2020 +0300 dma-debug: fix displaying of dma allocation type commit 9bb50ed7470944238ec8e30a94ef096caf9056ee upstream. The commit 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs") removed "dma_debug_page" enum, but missed to update type2name string table. This causes incorrect displaying of dma allocation type. Fix it by removing "page" string from type2name string table and switch to use named initializers. Before (dma_alloc_coherent()): k3-ringacc 4b800000.ringacc: scather-gather idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable k3-ringacc 4b800000.ringacc: scather-gather idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable After: k3-ringacc 4b800000.ringacc: coherent idx 2208 P=d1140000 N=d114 D=d1140000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable k3-ringacc 4b800000.ringacc: coherent idx 2216 P=d1150000 N=d115 D=d1150000 L=40 DMA_BIDIRECTIONAL dma map error check not applicable Fixes: 2e05ea5cdc1a ("dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs") Signed-off-by: Grygorii Strashko Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman commit 53e83828d352304fec5e19751f38ed8c65e6ec2f Author: Aurelien Aptel Date: Tue Apr 7 11:49:55 2020 +0200 cifs: ignore cached share root handle closing errors commit e79b0332ae06b4895dcecddf4bbc5d3917e9383c upstream. Fix tcon use-after-free and NULL ptr deref. Customer system crashes with the following kernel log: [462233.169868] CIFS VFS: Cancelling wait for mid 4894753 cmd: 14 => a QUERY DIR [462233.228045] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.305922] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.306205] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347060] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347107] CIFS VFS: Close unmatched open [462233.347113] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 ... [exception RIP: cifs_put_tcon+0xa0] (this is doing tcon->ses->server) #6 [...] smb2_cancelled_close_fid at ... [cifs] #7 [...] process_one_work at ... #8 [...] worker_thread at ... #9 [...] kthread at ... The most likely explanation we have is: * When we put the last reference of a tcon (refcount=0), we close the cached share root handle. * If closing a handle is interrupted, SMB2_close() will queue a SMB2_close() in a work thread. * The queued object keeps a tcon ref so we bump the tcon refcount, jumping from 0 to 1. * We reach the end of cifs_put_tcon(), we free the tcon object despite it now having a refcount of 1. * The queued work now runs, but the tcon, ses & server was freed in the meantime resulting in a crash. THREAD 1 ======== cifs_put_tcon => tcon refcount reach 0 SMB2_tdis close_shroot_lease close_shroot_lease_locked => if cached root has lease && refcount = 0 smb2_close_cached_fid => if cached root valid SMB2_close => retry close in a thread if interrupted smb2_handle_cancelled_close __smb2_handle_cancelled_close => !! tcon refcount bump 0 => 1 !! INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); queue_work(cifsiod_wq, &cancelled->work) => queue work tconInfoFree(tcon); ==> freed! cifs_put_smb_ses(ses); ==> freed! THREAD 2 (workqueue) ======== smb2_cancelled_close_fid SMB2_close(0, cancelled->tcon, ...); => use-after-free of tcon cifs_put_tcon(cancelled->tcon); => tcon refcount reach 0 second time *CRASH* Fixes: d9191319358d ("CIFS: Close cached root handle only if it has a lease") Signed-off-by: Aurelien Aptel Signed-off-by: Steve French Reviewed-by: Pavel Shilovsky Signed-off-by: Greg Kroah-Hartman commit 0058035f58cb0b50f0616b93ca636d32890cc399 Author: Florian Fainelli Date: Mon Mar 30 14:38:46 2020 -0700 net: dsa: bcm_sf2: Fix overflow checks commit d0802dc411f469569a537283b6f3833af47aece9 upstream. Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") tried to fix the some user controlled buffer overflows in bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is not representative of what the device actually supports. Correct that by using bcm_sf2_cfp_rule_size() instead. The latter subtracts the number of rules by 1, so change the checks from greater than or equal to greater than accordingly. Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 360aba644f1fadc04cfd4f4486d07eb74399abdd Author: Ben Skeggs Date: Tue Mar 31 16:08:44 2020 +1000 drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init [ Upstream commit 028a12f5aa829b4ba6ac011530b815eda4960e89 ] Certain boards with GP107/GP108 chipsets hang (often, but randomly) for unknown reasons during GR initialisation. The first tell-tale symptom of this issue is: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ] appearing in dmesg, likely followed by many other failures being logged. Karol found this WAR for the issue a while back, but efforts to isolate the root cause and proper fix have not yielded success so far. I've modified the original patch to include a few more details, limit it to GP107/GP108 by default, and added a config option to override this choice. Signed-off-by: Ben Skeggs Reviewed-by: Karol Herbst Signed-off-by: Sasha Levin commit c03892126ffea1c822f771711e65ebb06256bbdc Author: Yicheng Li Date: Mon Feb 3 14:53:56 2020 -0800 platform/chrome: cros_ec: Query EC protocol version if EC transitions between RO/RW [ Upstream commit 42cd0ab476e2daffc23982c37822a78f9a53cdd5 ] RO and RW of EC may have different EC protocol version. If EC transitions between RO and RW, but AP does not reboot (this is true for fingerprint microcontroller / cros_fp, but not true for main ec / cros_ec), the AP still uses the protocol version queried before transition, which can cause problems. In the case of fingerprint microcontroller, this causes AP to send the wrong version of EC_CMD_GET_NEXT_EVENT to RO in the interrupt handler, which in turn prevents RO to clear the interrupt line to AP, in an infinite loop. Once an EC_HOST_EVENT_INTERFACE_READY is received, we know that there might have been a transition between RO and RW, so re-query the protocol. Signed-off-by: Yicheng Li Tested-by: Marek Szyprowski Reviewed-by: Gwendal Grignou Signed-off-by: Enric Balletbo i Serra Signed-off-by: Sasha Levin commit b21e919dbe85d0728a06823b52a59a90e8067b69 Author: Chao Yu Date: Fri Feb 14 17:45:12 2020 +0800 f2fs: fix to wait all node page writeback [ Upstream commit dc5a941223edd803f476a153abd950cc3a83c3e1 ] There is a race condition that we may miss to wait for all node pages writeback, fix it. - fsync() - shrink - f2fs_do_sync_file - __write_node_page - set_page_writeback(page#0) : remove DIRTY/TOWRITE flag - f2fs_fsync_node_pages : won't find page #0 as TOWRITE flag was removeD - f2fs_wait_on_node_pages_writeback : wont' wait page #0 writeback as it was not in fsync_node_list list. - f2fs_add_fsync_node_entry Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list") Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit ad9c27d18541defa6e156080c46b2e18d99bcde2 Author: Eric Biggers Date: Thu Feb 20 20:50:37 2020 -0800 f2fs: fix leaking uninitialized memory in compressed clusters [ Upstream commit 7fa6d59816e7d81cfd4f854468c477c12b85c789 ] When the compressed data of a cluster doesn't end on a page boundary, the remainder of the last page must be zeroed in order to avoid leaking uninitialized memory to disk. Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Eric Biggers Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit f0bca2390679e37937785720b08bd5031842bd29 Author: Adrian Huang Date: Fri Feb 14 18:44:51 2020 +0800 iommu/amd: Fix the configuration of GCR3 table root pointer [ Upstream commit c20f36534666e37858a14e591114d93cc1be0d34 ] The SPA of the GCR3 table root pointer[51:31] masks 20 bits. However, this requires 21 bits (Please see the AMD IOMMU specification). This leads to the potential failure when the bit 51 of SPA of the GCR3 table root pointer is 1'. Signed-off-by: Adrian Huang Fixes: 52815b75682e2 ("iommu/amd: Add support for IOMMUv2 domain mode") Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit c610c5403f387eb1cacfc9bc5ddd3a460e5df18d Author: Dan Carpenter Date: Tue Feb 25 19:20:56 2020 +0300 libnvdimm: Out of bounds read in __nd_ioctl() [ Upstream commit f84afbdd3a9e5e10633695677b95422572f920dc ] The "cmd" comes from the user and it can be up to 255. It it's more than the number of bits in long, it results out of bounds read when we check test_bit(cmd, &cmd_mask). The highest valid value for "cmd" is ND_CMD_CALL (10) so I added a compare against that. Fixes: 62232e45f4a2 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200225162055.amtosfy7m35aivxg@kili.mountain Signed-off-by: Dan Williams Signed-off-by: Sasha Levin commit 32b23896facb9c30ebd0faecb0ee8df0e9fb95af Author: Jeffery Miller Date: Tue Feb 25 16:59:41 2020 -0600 power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks. [ Upstream commit e42fe5b29ac07210297e75f36deefe54edbdbf80 ] The Intel Compute Stick `STK1A32SC` can have a system vendor of "Intel(R) Client Systems". Broaden the Intel Compute Stick DMI checks so that they match "Intel Corporation" as well as "Intel(R) Client Systems". This fixes an issue where the STK1A32SC compute sticks were still exposing a battery with the existing blacklist entry. Signed-off-by: Jeffery Miller Reviewed-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit ff5a60ad4de778426d63d351e3fb1a21527efcfe Author: Guo Ren Date: Wed Feb 26 10:23:26 2020 +0800 csky: Fixup init_fpu compile warning with __init [ Upstream commit 12879bda3c2a974b7e4fe199a9c21f0c5f6bca04 ] WARNING: vmlinux.o(.text+0x2366): Section mismatch in reference from the function csky_start_secondary() to the function .init.text:init_fpu() The function csky_start_secondary() references the function __init init_fpu(). This is often because csky_start_secondary lacks a __init annotation or the annotation of init_fpu is wrong. Reported-by: Lu Chongzhi Signed-off-by: Guo Ren Signed-off-by: Sasha Levin commit 6ea3d6d40f1d73d32b54ce7361c098c706a7a561 Author: Yuantian Tang Date: Tue Mar 3 16:46:41 2020 +0800 thermal: qoriq: Fix a compiling issue [ Upstream commit cbe259fd80b7b02fba0dad79d8fdda8b70a8b963 ] Qoriq thermal driver is used by both PowerPC and ARM architecture. When built for PowerPC architecture, it reports error: undefined reference to `.__devm_regmap_init_mmio_clk' To fix it, select config REGMAP_MMIO. Fixes: 4316237bd627 (thermal: qoriq: Convert driver to use regmap API) Signed-off-by: Yuantian Tang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200303084641.35687-1-andy.tang@nxp.com Signed-off-by: Sasha Levin commit 2d00854b562a2b3e29d3d2ed9f9b254514963765 Author: Chuck Lever Date: Wed Mar 11 11:21:07 2020 -0400 sunrpc: Fix gss_unwrap_resp_integ() again [ Upstream commit 4047aa909c4a40fceebc36fff708d465a4d3c6e2 ] xdr_buf_read_mic() tries to find unused contiguous space in a received xdr_buf in order to linearize the checksum for the call to gss_verify_mic. However, the corner cases in this code are numerous and we seem to keep missing them. I've just hit yet another buffer overrun related to it. This overrun is at the end of xdr_buf_read_mic(): 1284 if (buf->tail[0].iov_len != 0) 1285 mic->data = buf->tail[0].iov_base + buf->tail[0].iov_len; 1286 else 1287 mic->data = buf->head[0].iov_base + buf->head[0].iov_len; 1288 __read_bytes_from_xdr_buf(&subbuf, mic->data, mic->len); 1289 return 0; This logic assumes the transport has set the length of the tail based on the size of the received message. base + len is then supposed to be off the end of the message but still within the actual buffer. In fact, the length of the tail is set by the upper layer when the Call is encoded so that the end of the tail is actually the end of the allocated buffer itself. This causes the logic above to set mic->data to point past the end of the receive buffer. The "mic->data = head" arm of this if statement is no less fragile. As near as I can tell, this has been a problem forever. I'm not sure that minimizing au_rslack recently changed this pathology much. So instead, let's use a more straightforward approach: kmalloc a separate buffer to linearize the checksum. This is similar to how gss_validate() currently works. Coming back to this code, I had some trouble understanding what was going on. So I've cleaned up the variable naming and added a few comments that point back to the XDR definition in RFC 2203 to help guide future spelunkers, including myself. As an added clean up, the functionality that was in xdr_buf_read_mic() is folded directly into gss_unwrap_resp_integ(), as that is its only caller. Signed-off-by: Chuck Lever Reviewed-by: Benjamin Coddington Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit 16119e8e86ba87bacdb943481183ffeac7dd5c1b Author: Jan Kara Date: Tue Mar 17 12:40:02 2020 +0100 ext2: fix debug reference to ext2_xattr_cache [ Upstream commit 32302085a8d90859c40cf1a5e8313f575d06ec75 ] Fix a debug-only build error in ext2/xattr.c: When building without extra debugging, (and with another patch that uses no_printk() instead of for the ext2-xattr debug-print macros, this build error happens: ../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’: ../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in this function); did you mean ‘ext2_xattr_list’? atomic_read(&ext2_xattr_cache->c_entry_count)); Fix the problem by removing cached entry count from the debug message since otherwise we'd have to export the mbcache structure just for that. Fixes: be0726d33cb8 ("ext2: convert to mbcache2") Reported-by: Randy Dunlap Signed-off-by: Jan Kara Signed-off-by: Sasha Levin commit 7435523bb1b9a141c878fe2f2cc70aeab884727c Author: Jacob Pan Date: Tue Mar 17 09:10:18 2020 +0800 iommu/vt-d: Fix page request descriptor size [ Upstream commit 52355fb1919ef7ed9a38e0f3de6e928de1f57217 ] Intel VT-d might support PRS (Page Reqest Support) when it's running in the scalable mode. Each page request descriptor occupies 32 bytes and is 32-bytes aligned. The page request descriptor offset mask should be 32-bytes aligned. Fixes: 5b438f4ba315d ("iommu/vt-d: Support page request in scalable mode") Signed-off-by: Lu Baolu Signed-off-by: Liu Yi L Signed-off-by: Jacob Pan Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit fa2fa282240b6b5d5a82b344c1c706e685bbd398 Author: Qian Cai Date: Tue Mar 17 11:03:26 2020 -0400 iommu/vt-d: Silence RCU-list debugging warning in dmar_find_atsr() [ Upstream commit c6f4ebdeba4cff590594df931ff1ee610c426431 ] dmar_find_atsr() calls list_for_each_entry_rcu() outside of an RCU read side critical section but with dmar_global_lock held. Silence this false positive. drivers/iommu/intel-iommu.c:4504 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffff9755bee8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1a6/0xe19 Call Trace: dump_stack+0xa4/0xfe lockdep_rcu_suspicious+0xeb/0xf5 dmar_find_atsr+0x1ab/0x1c0 dmar_parse_one_atsr+0x64/0x220 dmar_walk_remapping_entries+0x130/0x380 dmar_table_init+0x166/0x243 intel_iommu_init+0x1ab/0xe19 pci_iommu_init+0x1a/0x44 do_one_initcall+0xae/0x4d0 kernel_init_freeable+0x412/0x4c5 kernel_init+0x19/0x193 Signed-off-by: Qian Cai Acked-by: Lu Baolu Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit b0d0decd3d51a1d81f0414c925de55303964d84e Author: Jaegeuk Kim Date: Sun Feb 9 13:23:28 2020 -0800 f2fs: skip GC when section is full [ Upstream commit 2bac07635ddf9ed59268e61e415d8de9c5eaded7 ] This fixes skipping GC when segment is full in large section. Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit d184d6c164d22e7506c914855bf2b6d8584ae9da Author: Chao Yu Date: Thu Mar 12 10:45:29 2020 +0800 f2fs: fix to account compressed blocks in f2fs_compressed_blocks() [ Upstream commit 1a67cbe141cf991af252a88143d0fd975be2d9e7 ] por_fsstress reports inconsistent status in orphan inode, the root cause of this is in f2fs_write_raw_pages() we decrease i_compr_blocks incorrectly due to wrong calculation in f2fs_compressed_blocks(). So this patch exposes below two functions based on __f2fs_cluster_blocks: - f2fs_compressed_blocks: get count of compressed blocks in compressed cluster - f2fs_cluster_blocks: get count of valid blocks (including reserved blocks) in compressed cluster. Then use f2fs_compress_blocks() to get correct compressed blocks count in f2fs_write_raw_pages(). sanity_check_inode: inode (ino=ad80) hash inconsistent i_compr_blocks:2, i_blocks:1, run fsck to fix Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 926952e6366ab3b8019d3e2c7ae0685e3547c6ca Author: Randy Dunlap Date: Sun Mar 22 19:45:41 2020 -0700 ext2: fix empty body warnings when -Wextra is used [ Upstream commit 44a52022e7f15cbaab957df1c14f7a4f527ef7cf ] When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros to use the no_printk() macro instead of . This fixes gcc warnings when -Wextra is used: ../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] I have verified that the only object code change (with gcc 7.5.0) is the reversal of some instructions from 'cmp a,b' to 'cmp b,a'. Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org Signed-off-by: Randy Dunlap Cc: Jan Kara Cc: linux-ext4@vger.kernel.org Signed-off-by: Jan Kara Signed-off-by: Sasha Levin commit aec3d682942d8024d427fc4f6ea080788bdb372c Author: David Hildenbrand Date: Wed Feb 5 17:34:02 2020 +0100 virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM [ Upstream commit 5a6b4cc5b7a1892a8d7f63d6cbac6e0ae2a9d031 ] Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities, so this behavior cannot be configured. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Especially, a drop_slab() will result in the whole balloon getting deflated - undesired. While handling it via the OOM handler might not be perfect, it keeps existing behavior. If we want a different behavior, then we need a new feature bit and document it properly (although, there should be a clear use case and the intended effects should be well described). Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a moodule parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Note1: using the OOM handler is frowned upon, but it really is what we need for this feature. Note2: without VIRTIO_BALLOON_F_MUST_TELL_HOST (iow, always with QEMU) we could actually skip sending deflation requests to our hypervisor, making the OOM path *very* simple. Besically freeing pages and updating the balloon. If the communication with the host ever becomes a problem on this call path. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Test report by Tyler Sanderson: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate = total inflate). Without patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds (see attached graph). Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "grep balloon /proc/vmstat" process then, without the patch, the inflation process would never reach the target. Attached [1] is a png of a graph showing the problematic behavior without this patch. It shows deflate-queue activity increasing linearly while balloon size stays constant over the course of more than 8 minutes of the test. [1] https://lore.kernel.org/linux-mm/CAJuQAmphPcfew1v_EOgAdSFiprzjiZjmOf3iJDmFX0gD6b9TYQ@mail.gmail.com/2-without_patch.png Full test report and discussion [2]: [2] https://lore.kernel.org/r/CAJuQAmphPcfew1v_EOgAdSFiprzjiZjmOf3iJDmFX0gD6b9TYQ@mail.gmail.com Tested-by: Tyler Sanderson Reported-by: Tyler Sanderson Cc: Michael S. Tsirkin Cc: Wei Wang Cc: Alexander Duyck Cc: David Rientjes Cc: Nadav Amit Cc: Michal Hocko Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20200205163402.42627-4-david@redhat.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin commit 84f67aa45dee07af6272f49da2a6977cd5dcf0c4 Author: Olga Kornievskaia Date: Thu Mar 26 10:24:51 2020 -0400 SUNRPC: fix krb5p mount to provide large enough buffer in rq_rcvsize [ Upstream commit df513a7711712758b9cb1a48d86712e7e1ee03f4 ] Ever since commit 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size"). It changed how "req->rq_rcvsize" is calculated. It used to use au_cslack value which was nice and large and changed it to au_rslack value which turns out to be too small. Since 5.1, v3 mount with sec=krb5p fails against an Ontap server because client's receive buffer it too small. For gss krb5p, we need to account for the mic token in the verifier, and the wrap token in the wrap token. RFC 4121 defines: mic token Octet no Name Description -------------------------------------------------------------- 0..1 TOK_ID Identification field. Tokens emitted by GSS_GetMIC() contain the hex value 04 04 expressed in big-endian order in this field. 2 Flags Attributes field, as described in section 4.2.2. 3..7 Filler Contains five octets of hex value FF. 8..15 SND_SEQ Sequence number field in clear text, expressed in big-endian order. 16..last SGN_CKSUM Checksum of the "to-be-signed" data and octet 0..15, as described in section 4.2.4. that's 16bytes (GSS_KRB5_TOK_HDR_LEN) + chksum wrap token Octet no Name Description -------------------------------------------------------------- 0..1 TOK_ID Identification field. Tokens emitted by GSS_Wrap() contain the hex value 05 04 expressed in big-endian order in this field. 2 Flags Attributes field, as described in section 4.2.2. 3 Filler Contains the hex value FF. 4..5 EC Contains the "extra count" field, in big- endian order as described in section 4.2.3. 6..7 RRC Contains the "right rotation count" in big- endian order, as described in section 4.2.5. 8..15 SND_SEQ Sequence number field in clear text, expressed in big-endian order. 16..last Data Encrypted data for Wrap tokens with confidentiality, or plaintext data followed by the checksum for Wrap tokens without confidentiality, as described in section 4.2.4. Also 16bytes of header (GSS_KRB5_TOK_HDR_LEN), encrypted data, and cksum (other things like padding) RFC 3961 defines known cksum sizes: Checksum type sumtype checksum section or value size reference --------------------------------------------------------------------- CRC32 1 4 6.1.3 rsa-md4 2 16 6.1.2 rsa-md4-des 3 24 6.2.5 des-mac 4 16 6.2.7 des-mac-k 5 8 6.2.8 rsa-md4-des-k 6 16 6.2.6 rsa-md5 7 16 6.1.1 rsa-md5-des 8 24 6.2.4 rsa-md5-des3 9 24 ?? sha1 (unkeyed) 10 20 ?? hmac-sha1-des3-kd 12 20 6.3 hmac-sha1-des3 13 20 ?? sha1 (unkeyed) 14 20 ?? hmac-sha1-96-aes128 15 20 [KRB5-AES] hmac-sha1-96-aes256 16 20 [KRB5-AES] [reserved] 0x8003 ? [GSS-KRB5] Linux kernel now mainly supports type 15,16 so max cksum size is 20bytes. (GSS_KRB5_MAX_CKSUM_LEN) Re-use already existing define of GSS_KRB5_MAX_SLACK_NEEDED that's used for encoding the gss_wrap tokens (same tokens are used in reply). Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size") Signed-off-by: Olga Kornievskaia Reviewed-by: Chuck Lever Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit 2cf6e0ec9b7f970904e97a6d886862e974e3188b Author: Jacob Pan Date: Thu Mar 19 21:32:30 2020 -0700 iommu/vt-d: Fix mm reference leak [ Upstream commit 902baf61adf6b187f0a6b789e70d788ea71ff5bc ] Move canonical address check before mmget_not_zero() to avoid mm reference leak. Fixes: 9d8c3af31607 ("iommu/vt-d: IOMMU Page Request needs to check if address is canonical.") Signed-off-by: Jacob Pan Acked-by: Lu Baolu Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit 06cf124d3dbbfb71d01f87a2d9401af9a457c266 Author: Jacob Pan Date: Thu Mar 19 21:32:31 2020 -0700 iommu/vt-d: Add build dependency on IOASID [ Upstream commit 4a663dae47316ae8b97d5b77025fe7dfd9d3487f ] IOASID code is needed by VT-d scalable mode for PASID allocation. Add explicit dependency such that IOASID is built-in whenever Intel IOMMU is enabled. Otherwise, aux domain code will fail when IOMMU is built-in and IOASID is compiled as a module. Fixes: 59a623374dc38 ("iommu/vt-d: Replace Intel specific PASID allocator with IOASID") Signed-off-by: Jacob Pan Acked-by: Lu Baolu Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit 387391620c961bb3bebca26ca94caecccbe92501 Author: Jean-Philippe Brucker Date: Thu Mar 26 10:35:57 2020 +0100 iommu/virtio: Fix freeing of incomplete domains [ Upstream commit 7062af3ed2ba451029e3733d9f677c68f5ea9e77 ] Calling viommu_domain_free() on a domain that hasn't been finalised (not attached to any device, for example) can currently cause an Oops, because we attempt to call ida_free() on ID 0, which may either be unallocated or used by another domain. Only initialise the vdomain->viommu pointer, which denotes a finalised domain, at the end of a successful viommu_domain_finalise(). Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver") Reported-by: Eric Auger Signed-off-by: Jean-Philippe Brucker Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20200326093558.2641019-3-jean-philippe@linaro.org Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit bcb300408c8797830c3868a593db2bc55b2c827f Author: Nicolas Saenz Julienne Date: Thu Mar 26 13:20:01 2020 +0100 drm/vc4: Fix HDMI mode validation [ Upstream commit b1e7396a1d0e6af6806337fdaaa44098d6b3343c ] Current mode validation impedes setting up some video modes which should be supported otherwise. Namely 1920x1200@60Hz. Fix this by lowering the minimum HDMI state machine clock to pixel clock ratio allowed. Fixes: 32e823c63e90 ("drm/vc4: Reject HDMI modes with too high of clocks.") Reported-by: Stefan Wahren Suggested-by: Dave Stevenson Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200326122001.22215-1-nsaenzjulienne@suse.de Signed-off-by: Sasha Levin commit 341ec2df1b61cfb7da1dc41dee01f8bed221aa04 Author: Alan Maguire Date: Tue Mar 17 17:35:34 2020 +0000 um: falloc.h needs to be directly included for older libc [ Upstream commit 35f3401317a3b26aa01fde8facfd320f2628fdcc ] When building UML with glibc 2.17 installed, compilation of arch/um/os-Linux/file.c fails due to failure to find FALLOC_FL_PUNCH_HOLE and FALLOC_FL_KEEP_SIZE definitions. It appears that /usr/include/bits/fcntl-linux.h (indirectly included by /usr/include/fcntl.h) does not include falloc.h with an older glibc, whereas a more up-to-date version does. Adding the direct include to file.c resolves the issue and does not cause problems for more recent glibc. Fixes: 50109b5a03b4 ("um: Add support for DISCARD in the UBD Driver") Cc: Brendan Higgins Signed-off-by: Alan Maguire Reviewed-by: Brendan Higgins Acked-By: Anton Ivanov Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit 245a2768b370b457d8557951120e78f579e21719 Author: Prashant Malani Date: Mon Feb 10 11:06:24 2020 -0800 mfd: cros_ec: Check DT node for usbpd-notify add [ Upstream commit f8db89d14efb770dd59aa0ca74386e5de68310d5 ] Add a check to ensure there is indeed an EC device tree entry before adding the cros-usbpd-notify device. This covers configs where both CONFIG_ACPI and CONFIG_OF are defined, but the EC device is defined using device tree and not in ACPI. Fixes: 4602dce0361e ("mfd: cros_ec: Add cros-usbpd-notify subdevice") Signed-off-by: Prashant Malani Tested-by: Enric Balletbo i Serra Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit cd556e9069bde271d961b9d27b71492737857049 Author: Luis Henriques Date: Mon Feb 24 13:44:32 2020 +0000 ceph: re-org copy_file_range and fix some error paths [ Upstream commit 1b0c3b9f91f0df03088d293fc9e62743fd789ad2 ] This patch re-organizes copy_file_range, trying to fix a few issues in the error handling. Here's the summary: - Abort copy if initial do_splice_direct() returns fewer bytes than requested. - Move the 'size' initialization (with i_size_read()) further down in the code, after the initial call to do_splice_direct(). This avoids issues with a possibly stale value if a manual copy is done. - Move the object copy loop into a separate function. This makes it easier to handle errors (e.g, dirtying caps and updating the MDS metadata if only some objects have been copied before an error has occurred). - Added calls to ceph_oloc_destroy() to avoid leaking memory with src_oloc and dst_oloc - After the object copy loop, the new file size to be reported to the MDS (if there's file size change) is now the actual file size, and not the size after an eventual extra manual copy. - Added a few dout() to show the number of bytes copied in the two manual copies and in the object copy loop. Signed-off-by: Luis Henriques Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit d76d787744e428542828b1bcbc0a6c6b28f1b5ac Author: Bob Moore Date: Fri Mar 27 15:21:09 2020 -0700 ACPICA: Fixes for acpiExec namespace init file [ Upstream commit 9a1ae80412dcaa67a29eecf19de44f32b5f1c357 ] This is the result of squashing the following ACPICA commit ID's: 6803997e5b4f3635cea6610b51ff69e29d251de3 f31cdf8bfda22fe265c1a176d0e33d311c82a7f7 This change fixes several problems with the support for the acpi_exec namespace init file (-fi option). Specifically, it fixes AE_ALREADY_EXISTS errors, as well as various seg faults. Link: https://github.com/acpica/acpica/commit/f31cdf8b Link: https://github.com/acpica/acpica/commit/6803997e Signed-off-by: Bob Moore Signed-off-by: Erik Kaneda Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit d18a2b128d3902b5ef908a5077822ad0b3883186 Author: Chao Yu Date: Fri Mar 20 18:14:31 2020 +0800 f2fs: fix potential deadlock on compressed quota file [ Upstream commit 466357dc9b5ff555d16b7f9a0ff264eb9d5d908b ] generic/232 reports below deadlock: fsstress D 0 96980 96969 0x00084000 Call Trace: schedule+0x4a/0xb0 io_schedule+0x12/0x40 __lock_page+0x127/0x1d0 pagecache_get_page+0x1d8/0x250 prepare_compress_overwrite+0xe0/0x490 [f2fs] f2fs_prepare_compress_overwrite+0x5d/0x80 [f2fs] f2fs_write_begin+0x833/0xb90 [f2fs] f2fs_quota_write+0x145/0x1e0 [f2fs] write_blk+0x36/0x80 [quota_tree] do_insert_tree+0x2ac/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] qtree_write_dquot+0x70/0x190 [quota_tree] v2_write_dquot+0x43/0x90 [quota_v2] dquot_acquire+0x77/0x100 f2fs_dquot_acquire+0x2f/0x60 [f2fs] dqget+0x310/0x450 dquot_transfer+0xb2/0x120 f2fs_setattr+0x11a/0x4a0 [f2fs] notify_change+0x349/0x480 chown_common+0x168/0x1c0 do_fchownat+0xbc/0xf0 __x64_sys_lchown+0x21/0x30 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 task PC stack pid father kworker/u256:0 D 0 103444 2 0x80084000 Workqueue: writeback wb_workfn (flush-251:1) Call Trace: schedule+0x4a/0xb0 schedule_timeout+0x15e/0x2f0 io_schedule_timeout+0x19/0x40 congestion_wait+0x7e/0x120 f2fs_write_multi_pages+0x12a/0x840 [f2fs] f2fs_write_cache_pages+0x48f/0x790 [f2fs] f2fs_write_data_pages+0x2db/0x330 [f2fs] do_writepages+0x1a/0x60 __writeback_single_inode+0x3d/0x340 writeback_sb_inodes+0x225/0x4a0 wb_writeback+0xf7/0x320 wb_workfn+0xba/0x470 process_one_work+0x16c/0x3f0 worker_thread+0x4c/0x440 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 fsstress D 0 5277 5266 0x00084000 Call Trace: schedule+0x4a/0xb0 rwsem_down_write_slowpath+0x29d/0x540 block_operations+0x105/0x360 [f2fs] f2fs_write_checkpoint+0x101/0x1010 [f2fs] f2fs_sync_fs+0xa8/0x130 [f2fs] f2fs_do_sync_file+0x1ad/0x890 [f2fs] do_fsync+0x38/0x60 __x64_sys_fdatasync+0x13/0x20 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The root cause is there is potential deadlock between quota data update and writeback. Kworker Thread B Thread C - f2fs_write_cache_pages - lock whole cluster --- A - f2fs_write_multi_pages - f2fs_write_raw_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - f2fs_setattr - f2fs_lock_op --- B - f2fs_write_checkpoint - block_operations - f2fs_lock_all --- B - dquot_transfer - f2fs_quota_write - f2fs_prepare_compress_overwrite - pagecache_get_page --- A - f2fs_trylock_op failed --- B - congestion_wait - goto rewrite To fix this issue, during quota file writeback, just redirty all pages left in cluster rather holding pages' lock in cluster and looping retrying lock cp_rwsem. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 998756de57e489cb0752dbb4dd5e65a2a0230bb5 Author: Chao Yu Date: Thu Mar 19 19:58:00 2020 +0800 f2fs: fix NULL pointer dereference in f2fs_write_begin() [ Upstream commit 62f63eea291b50a5677ae7503ac128803174698a ] BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs] Call Trace: f2fs_quota_write+0x139/0x1d0 [f2fs] write_blk+0x36/0x80 [quota_tree] get_free_dqblk+0x42/0xa0 [quota_tree] do_insert_tree+0x235/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] do_insert_tree+0x26e/0x4a0 [quota_tree] qtree_write_dquot+0x70/0x190 [quota_tree] v2_write_dquot+0x43/0x90 [quota_v2] dquot_acquire+0x77/0x100 f2fs_dquot_acquire+0x2f/0x60 [f2fs] dqget+0x310/0x450 dquot_transfer+0x7e/0x120 f2fs_setattr+0x11a/0x4a0 [f2fs] notify_change+0x349/0x480 chown_common+0x168/0x1c0 do_fchownat+0xbc/0xf0 __x64_sys_fchownat+0x20/0x30 do_syscall_64+0x5f/0x220 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(), so that if quota file is compressed one, we can avoid above NULL pointer dereference when updating quota content. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit e21bd3d999975d7f919d804c6136f1e7733d025f Author: Chao Yu Date: Mon Mar 23 17:43:04 2020 +0800 f2fs: fix NULL pointer dereference in f2fs_verity_work() [ Upstream commit 79bbefb19f1359fb2cbd144d5a054649e7e583be ] If both compression and fsverity feature is on, generic/572 will report below NULL pointer dereference bug. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:f2fs_verity_work+0x60/0x90 [f2fs] #PF: supervisor read access in kernel mode Workqueue: fsverity_read_queue f2fs_verity_work [f2fs] RIP: 0010:f2fs_verity_work+0x60/0x90 [f2fs] Call Trace: process_one_work+0x16c/0x3f0 worker_thread+0x4c/0x440 ? rescuer_thread+0x350/0x350 kthread+0xf8/0x130 ? kthread_unpark+0x70/0x70 ret_from_fork+0x35/0x40 There are two issue in f2fs_verity_work(): - it needs to traverse and verify all pages in bio. - if pages in bio belong to non-compressed cluster, accessing decompress IO context stored in page private will cause NULL pointer dereference. Fix them. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit cff529f5f9efc630e24f4149cc9985625b8ca80c Author: Chao Yu Date: Mon Mar 23 11:18:07 2020 +0800 f2fs: fix potential .flags overflow on 32bit architecture [ Upstream commit 7653b9d87516ed65e112d2273c65eca6f97d0a27 ] f2fs_inode_info.flags is unsigned long variable, it has 32 bits in 32bit architecture, since we introduced FI_MMAP_FILE flag when we support data compression, we may access memory cross the border of .flags field, corrupting .i_sem field, result in below deadlock. To fix this issue, let's expand .flags as an array to grab enough space to store new flags. Call Trace: __schedule+0x8d0/0x13fc ? mark_held_locks+0xac/0x100 schedule+0xcc/0x260 rwsem_down_write_slowpath+0x3ab/0x65d down_write+0xc7/0xe0 f2fs_drop_nlink+0x3d/0x600 [f2fs] f2fs_delete_inline_entry+0x300/0x440 [f2fs] f2fs_delete_entry+0x3a1/0x7f0 [f2fs] f2fs_unlink+0x500/0x790 [f2fs] vfs_unlink+0x211/0x490 do_unlinkat+0x483/0x520 sys_unlink+0x4a/0x70 do_fast_syscall_32+0x12b/0x683 entry_SYSENTER_32+0xaa/0x102 Fixes: 4c8ff7095bef ("f2fs: support data compression") Tested-by: Ondrej Jirman Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit a6fae3fa0f11ebc16add8253783912a9a4a4dc3b Author: Chao Yu Date: Tue Mar 3 16:57:06 2020 +0800 f2fs: compress: fix to call missing destroy_compress_ctx() [ Upstream commit 09ff48011e220e2b4f1d9ce2f472ecb63645cbfc ] Otherwise, it will cause memory leak. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 01357ecc553ca507252790128d9c1b252e721113 Author: Guo Ren Date: Tue Mar 31 23:45:52 2020 +0800 csky: Fixup get wrong psr value from phyical reg [ Upstream commit 9c0e343d7654a329d1f9b53d253cbf7fb6eff85d ] We should get psr value from regs->psr in stack, not directly get it from phyiscal register then save the vector number in tsk->trap_no. Signed-off-by: Guo Ren Signed-off-by: Sasha Levin commit a3f2e7c9133a9579e21f8e4925170b0e6ec2402b Author: Gayatri Kammela Date: Fri Mar 27 14:28:19 2020 -0700 ACPI: Update Tiger Lake ACPI device IDs [ Upstream commit b62c770fee699a137359e1f1da9bf14a7f348567 ] Tiger Lake's new unique ACPI device IDs for DPTF and fan drivers are not valid as the IDs are missing 'C'. Fix the IDs by updating them. After the update, the new IDs should now look like INT1047 --> INTC1047 INT1040 --> INTC1040 INT1043 --> INTC1043 INT1044 --> INTC1044 Fixes: 55cfe6a5c582 ("ACPI: DPTF: Add Tiger Lake ACPI device IDs") Fixes: c248dfe7e0ca ("ACPI: fan: Add Tiger Lake ACPI device ID") Suggested-by: Srinivas Pandruvada Signed-off-by: Gayatri Kammela Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit c1e0d54c927ae4b9f47f8929865bfb07ab185956 Author: Trond Myklebust Date: Sun Mar 29 20:06:45 2020 -0400 NFS: Fix memory leaks in nfs_pageio_stop_mirroring() [ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ] If we just set the mirror count to 1 without first clearing out the mirrors, we can leak queued up requests. Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit b33c5a68a5bcb0e3eded766aded5b2c1ef9c4dad Author: Jack Zhang Date: Wed Apr 1 20:06:58 2020 +0800 drm/amdkfd: kfree the wrong pointer [ Upstream commit 3148a6a0ef3cf93570f30a477292768f7eb5d3c3 ] Originally, it kfrees the wrong pointer for mem_obj. It would cause memory leak under stress test. Signed-off-by: Jack Zhang Acked-by: Nirmoy Das Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit f9d7cb1dbcfd1344c45c475c1e6ee48dd21e9c61 Author: Guo Ren Date: Sat Mar 28 19:14:37 2020 +0800 csky: Fixup cpu speculative execution to IO area [ Upstream commit aefd9461d34a1b0a2acad0750c43216c1c27b9d4 ] For the memory size ( > 512MB, < 1GB), the MSA setting is: - SSEG0: PHY_START , PHY_START + 512MB - SSEG1: PHY_START + 512MB, PHY_START + 1GB But the real memory is no more than 1GB, there is a gap between the end size of memory and border of 1GB. CPU could speculatively execute to that gap and if the gap of the bus couldn't respond to the CPU request, then the crash will happen. Now make the setting with: - SSEG0: PHY_START , PHY_START + 512MB (no change) - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB) We also deprecated zhole_szie[] settings, it's only used by arm style CPUs. All memory gap should use Reserved setting of dts in csky system. Signed-off-by: Guo Ren Signed-off-by: Sasha Levin commit 3875db666d95c1cbe98236d3034bbc863cca813c Author: Qian Cai Date: Fri Apr 3 10:03:45 2020 -0400 x86: ACPI: fix CPU hotplug deadlock [ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ] Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai Tested-by: Borislav Petkov [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit c872cd2095b98e14401f036d7b13dd64d7f6b762 Author: Ricardo Ribalda Delgado Date: Wed Apr 1 11:51:47 2020 +0200 leds: core: Fix warning message when init_data [ Upstream commit 64ed6588c2ea618d3f9ca9d8b365ae4c19f76225 ] The warning message when a led is renamed due to name collition can fail to show proper original name if init_data is used. Eg: [ 9.073996] leds-gpio a0040000.leds_0: Led (null) renamed to red_led_1 due to name collision Fixes: bb4e9af0348d ("leds: core: Add support for composing LED class device names") Signed-off-by: Ricardo Ribalda Delgado Acked-by: Jacek Anaszewski Signed-off-by: Pavel Machek Signed-off-by: Sasha Levin commit dd4a3179e04c7a7cf4b0bcc949c16ce3a52905c2 Author: Karol Herbst Date: Tue Mar 24 21:29:23 2020 +0100 drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges [ Upstream commit 434fdb51513bf3057ac144d152e6f2f2b509e857 ] Fixes the infamous 'runtime PM' bug many users are facing on Laptops with Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU. Depending on the used kernel there might be messages like those in demsg: "nouveau 0000:01:00.0: Refused to change power state, currently in D3" "nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)" followed by backtraces of kernel crashes or timeouts within nouveau. It's still unkown why this issue exists, but this is a reliable workaround and solves a very annoying issue for user having to choose between a crashing kernel or higher power consumption of their Laptops. Signed-off-by: Karol Herbst Cc: Bjorn Helgaas Cc: Lyude Paul Cc: Rafael J. Wysocki Cc: Mika Westerberg Cc: linux-pci@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623 Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit 37ff2a60fef9dc451cfc9db74e2a6d52db482b28 Author: David Hildenbrand Date: Fri Apr 3 17:30:48 2020 +0200 KVM: s390: vsie: Fix possible race when shadowing region 3 tables [ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ] We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions. We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak. Identified by manual code inspection. I don't think this classifies as stable material. Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger Signed-off-by: Sasha Levin commit 123af2a26a2abbc9a0b0c6181a00e941e01236f7 Author: Vegard Nossum Date: Mon Apr 6 20:09:37 2020 -0700 compiler.h: fix error in BUILD_BUG_ON() reporting [ Upstream commit af9c5d2e3b355854ff0e4acfbfbfadcd5198a349 ] compiletime_assert() uses __LINE__ to create a unique function name. This means that if you have more than one BUILD_BUG_ON() in the same source line (which can happen if they appear e.g. in a macro), then the error message from the compiler might output the wrong condition. For this source file: #include #define macro() \ BUILD_BUG_ON(1); \ BUILD_BUG_ON(0); void foo() { macro(); } gcc would output: ./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0 _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1 instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so each BUILD_BUG_ON() gets a different function name and the correct condition is printed: ./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1 _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) Signed-off-by: Vegard Nossum Signed-off-by: Andrew Morton Reviewed-by: Masahiro Yamada Reviewed-by: Daniel Santos Cc: Rasmus Villemoes Cc: Ian Abbott Cc: Joe Perches Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 0cb9feb46eb4feb6f5f20bdb81ab92ff02426b08 Author: Qian Cai Date: Mon Apr 6 20:10:25 2020 -0700 percpu_counter: fix a data race at vm_committed_as [ Upstream commit 7e2345200262e4a6056580f0231cccdaffc825f3 ] "vm_committed_as.count" could be accessed concurrently as reported by KCSAN, BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35: percpu_counter_add_batch+0x83/0xd0 percpu_counter_add_batch at lib/percpu_counter.c:91 __vm_enough_memory+0xb9/0x260 dup_mm+0x3a4/0x8f0 copy_process+0x2458/0x3240 _do_fork+0xaa/0x9f0 __do_sys_clone+0x125/0x160 __x64_sys_clone+0x70/0x90 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19: __vm_enough_memory+0x199/0x260 percpu_counter_read_positive at include/linux/percpu_counter.h:81 (inlined by) __vm_enough_memory at mm/util.c:839 mmap_region+0x1b2/0xa10 do_mmap+0x45c/0x700 vm_mmap_pgoff+0xc0/0x130 ksys_mmap_pgoff+0x6e/0x300 __x64_sys_mmap+0x33/0x40 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe The read is outside percpu_counter::lock critical section which results in a data race. Fix it by adding a READ_ONCE() in percpu_counter_read_positive() which could also service as the existing compiler memory barrier. Signed-off-by: Qian Cai Signed-off-by: Andrew Morton Acked-by: Marco Elver Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit a45bb566fa39e681c32958996b25bafc2346a761 Author: Steven Price Date: Mon Apr 6 20:08:43 2020 -0700 include/linux/swapops.h: correct guards for non_swap_entry() [ Upstream commit 3f3673d7d324d872d9d8ddb73b3e5e47fbf12e0d ] If CONFIG_DEVICE_PRIVATE is defined, but neither CONFIG_MEMORY_FAILURE nor CONFIG_MIGRATION, then non_swap_entry() will return 0, meaning that the condition (non_swap_entry(entry) && is_device_private_entry(entry)) in zap_pte_range() will never be true even if the entry is a device private one. Equally any other code depending on non_swap_entry() will not function as expected. I originally spotted this just by looking at the code, I haven't actually observed any problems. Looking a bit more closely it appears that actually this situation (currently at least) cannot occur: DEVICE_PRIVATE depends on ZONE_DEVICE ZONE_DEVICE depends on MEMORY_HOTREMOVE MEMORY_HOTREMOVE depends on MIGRATION Fixes: 5042db43cc26 ("mm/ZONE_DEVICE: new type of ZONE_DEVICE for unaddressable memory") Signed-off-by: Steven Price Signed-off-by: Andrew Morton Cc: Jérôme Glisse Cc: Arnd Bergmann Cc: Dan Williams Cc: John Hubbard Link: http://lkml.kernel.org/r/20200305130550.22693-1-steven.price@arm.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit bca4d36a2a112a6eede285f029a743bb2d805fe3 Author: Ralph Campbell Date: Tue Mar 3 16:13:36 2020 -0800 drm/nouveau/svm: fix vma range check for migration [ Upstream commit b92103b559c77abc5f8b7bec269230a219c880b7 ] find_vma_intersection(mm, start, end) only guarantees that end is greater than or equal to vma->vm_start but doesn't guarantee that start is greater than or equal to vma->vm_start. The calculation for the intersecting range in nouveau_svmm_bind() isn't accounting for this and can call migrate_vma_setup() with a starting address less than vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for the range instead of nouveau skipping that part of the range and migrating the rest. Signed-off-by: Ralph Campbell Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit ded30f112b5e835f7d2245a4d2f5b24618e3099c Author: Ralph Campbell Date: Tue Mar 3 16:13:37 2020 -0800 drm/nouveau/svm: check for SVM initialized before migrating [ Upstream commit 822cab6150d3002952407a8297ff5a0d32bb7b54 ] When migrating system memory to GPU memory, check that SVM has been enabled. Even though most errors can be ignored since migration is a performance optimization, return an error because this is a violation of the API. Signed-off-by: Ralph Campbell Signed-off-by: Ben Skeggs Signed-off-by: Sasha Levin commit 102cccde0b7413a148076f4fcf0ecc7c979ec003 Author: Davide Caratti Date: Mon Apr 6 11:38:29 2020 +0200 macsec: fix NULL dereference in macsec_upd_offload() [ Upstream commit aa81700cf2326e288c9ca1fe7b544039617f1fc2 ] macsec_upd_offload() gets the value of MACSEC_OFFLOAD_ATTR_TYPE without checking its presence in the request message, and this causes a NULL dereference. Fix it rejecting any configuration that does not include this attribute. Reported-and-tested-by: syzbot+7022ab7c383875c17eff@syzkaller.appspotmail.com Fixes: dcb780fb2795 ("net: macsec: add nla support for changing the offloading selection") Signed-off-by: Davide Caratti Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9be5f7a0995e4f5abe85877403f596b624eaeaea Author: Christophe Leroy Date: Wed Apr 1 21:11:54 2020 -0700 mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS [ Upstream commit bb297bb2de517e41199185021f043bbc5d75b377 ] When CONFIG_HUGETLB_PAGE is set but not CONFIG_HUGETLBFS, the following build failure is encoutered: In file included from arch/powerpc/mm/fault.c:33:0: include/linux/hugetlb.h: In function 'hstate_inode': include/linux/hugetlb.h:477:9: error: implicit declaration of function 'HUGETLBFS_SB' [-Werror=implicit-function-declaration] return HUGETLBFS_SB(i->i_sb)->hstate; ^ include/linux/hugetlb.h:477:30: error: invalid type argument of '->' (have 'int') return HUGETLBFS_SB(i->i_sb)->hstate; ^ Gate hstate_inode() with CONFIG_HUGETLBFS instead of CONFIG_HUGETLB_PAGE. Fixes: a137e1cc6d6e ("hugetlbfs: per mount huge page sizes") Reported-by: kbuild test robot Signed-off-by: Christophe Leroy Signed-off-by: Andrew Morton Reviewed-by: Mike Kravetz Cc: Baoquan He Cc: Nishanth Aravamudan Cc: Nick Piggin Cc: Adam Litke Cc: Andi Kleen Link: http://lkml.kernel.org/r/7e8c3a3c9a587b9cd8a2f146df32a421b961f3a2.1584432148.git.christophe.leroy@c-s.fr Link: https://patchwork.ozlabs.org/patch/1255548/#2386036 Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 1c5301b47c6cfec688e7d4c5d26681ca99e1b870 Author: Gayatri Kammela Date: Fri Mar 27 14:28:20 2020 -0700 platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID [ Upstream commit d5764dc597467664a1a70ab66a2314a011aeccd4 ] Tiger Lake's new unique ACPI device IDs for intel-hid driver is not valid because of missing 'C' in the ID. Fix the ID by updating it. After the update, the new ID should now look like INT1051 --> INTC1051 Fixes: bdd11b654035 ("platform/x86: intel-hid: Add Tiger Lake ACPI device ID") Suggested-by: Srinivas Pandruvada Signed-off-by: Gayatri Kammela Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit a40308ba866b6aba339b051fdbe0600481f8db37 Author: Rob Herring Date: Tue Mar 24 12:05:12 2020 -0600 dt-bindings: thermal: tsens: Fix nvmem-cell-names schema [ Upstream commit b9589def9f9af93d9d4c5969c9a6c166f070e36e ] There's a typo 'nvmem-cells-names' in the schema which means the correct 'nvmem-cell-names' in the examples are not checked. The possible values are wrong too both in that the 2nd entry is not specified correctly and the values are just wrong based on the dts files in the kernel. Fixes: a877e768f655 ("dt-bindings: thermal: tsens: Convert over to a yaml schema") Cc: Andy Gross Cc: Bjorn Andersson Cc: Amit Kucheria Cc: Zhang Rui Cc: Daniel Lezcano Cc: linux-arm-msm@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring Reviewed-by: Amit Kucheria Signed-off-by: Sasha Levin commit 59a6ea7ebf72a5c6159479ddc6f6b99a80b773bd Author: Bhawanpreet Lakha Date: Mon Mar 30 13:29:46 2020 -0400 drm/amd/display: Don't try hdcp1.4 when content_type is set to type1 [ Upstream commit c2850c125d919efbb3a9ab46410d23912934f585 ] [Why] When content type property is set to 1. We should enable hdcp2.2 and if we cant then stop. Currently the way it works in DC is that if we fail hdcp2, we will try hdcp1 after. [How] Use link config to force disable hdcp1.4 when type1 is set. Signed-off-by: Bhawanpreet Lakha Reviewed-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit c7735668d4f5a89bdf6e994442a7168ad01c0586 Author: Miroslav Benes Date: Thu Mar 26 10:26:02 2020 +0100 x86/xen: Make the boot CPU idle task reliable [ Upstream commit 2f62f36e62daec43aa7b9633ef7f18e042a80bed ] The unwinder reports the boot CPU idle task's stack on XEN PV as unreliable, which affects at least live patching. There are two reasons for this. First, the task does not follow the x86 convention that its stack starts at the offset right below saved pt_regs. It allows the unwinder to easily detect the end of the stack and verify it. Second, startup_xen() function does not store the return address before jumping to xen_start_kernel() which confuses the unwinder. Amend both issues by moving the starting point of initial stack in startup_xen() and storing the return address before the jump, which is exactly what call instruction does. Signed-off-by: Miroslav Benes Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit 0920eeac845271b0d490d9e723390ef36a13bf6e Author: Long Li Date: Thu Mar 26 22:09:20 2020 -0700 cifs: Allocate encryption header through kmalloc [ Upstream commit 3946d0d04bb360acca72db5efe9ae8440012d9dc ] When encryption is used, smb2_transform_hdr is defined on the stack and is passed to the transport. This doesn't work with RDMA as the buffer needs to be DMA'ed. Fix it by using kmalloc. Signed-off-by: Long Li Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 11917049debbba73882c57f5703bd9cbfb612091 Author: Gabriel Krisman Bertazi Date: Mon Mar 16 20:45:06 2020 -0400 um: ubd: Prevent buffer overrun on command completion [ Upstream commit 6e682d53fc1ef73a169e2a5300326cb23abb32ee ] On the hypervisor side, when completing commands and the pipe is full, we retry writing only the entries that failed, by offsetting io_req_buffer, but we don't reduce the number of bytes written, which can cause a buffer overrun of io_req_buffer, and write garbage to the pipe. Cc: Martyn Welch Signed-off-by: Gabriel Krisman Bertazi Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit bf28c63c48bb03e4b2b76dcf6a1f8d30e71b41b3 Author: Eric Sandeen Date: Wed Mar 18 14:19:38 2020 -0500 ext4: do not commit super on read-only bdev [ Upstream commit c96e2b8564adfb8ac14469ebc51ddc1bfecb3ae2 ] Under some circumstances we may encounter a filesystem error on a read-only block device, and if we try to save the error info to the superblock and commit it, we'll wind up with a noisy error and backtrace, i.e.: [ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 ... To avoid this, commit the error info in the superblock only if the block device is writable. Reported-by: Ritesh Harjani Signed-off-by: Eric Sandeen Reviewed-by: Andreas Dilger Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 48b3f393ca6649fe7c0d3ae6d37dc40410347564 Author: Liwei Song Date: Wed Mar 25 11:50:13 2020 +0800 nfsroot: set tcp as the default transport protocol [ Upstream commit 89c8023fd46167a41246a56b31d1b3c9a20b6970 ] UDP is disabled by default in commit b24ee6c64ca7 ("NFS: allow deprecation of NFS UDP protocol"), but the default mount options is still udp, change it to tcp to avoid the "Unsupported transport protocol udp" error if no protocol is specified when mount nfs. Fixes: b24ee6c64ca7 ("NFS: allow deprecation of NFS UDP protocol") Signed-off-by: Liwei Song Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit 862b64cf8c01d82a64136df9b6d1e6cb86ca676b Author: Thomas Richter Date: Mon Mar 23 11:09:07 2020 +0100 s390/cpum_sf: Fix wrong page count in error message [ Upstream commit 4141b6a5e9f171325effc36a22eb92bf961e7a5c ] When perf record -e SF_CYCLES_BASIC_DIAG runs with very high frequency, the samples arrive faster than the perf process can save them to file. Eventually, for longer running processes, this leads to the siutation where the trace buffers allocated by perf slowly fills up. At one point the auxiliary trace buffer is full and the CPU Measurement sampling facility is turned off. Furthermore a warning is printed to the kernel log buffer: cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling mode is full The number of allocated pages for the auxiliary trace buffer is shown as zero pages. That is wrong. Fix this by saving the number of allocated pages before entering the work loop in the interrupt handler. When the interrupt handler processes the samples, it may detect the buffer full condition and stop sampling, reducing the buffer size to zero. Print the correct value in the error message: cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling mode is full Signed-off-by: Thomas Richter Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 0c581aa4a53dfd61fb5d7e5f8072dcce26d8c7a2 Author: Nathan Chancellor Date: Mon Mar 23 15:27:29 2020 -0700 powerpc/maple: Fix declaration made after definition [ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ] When building ppc64 defconfig, Clang errors (trimmed for brevity): arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] machine_device_initcall(maple, maple_cpc925_edac_setup); ^ machine_device_initcall expands to __define_machine_initcall, which in turn has the macro machine_is used in it, which declares mach_##name with an __attribute__((weak)). define_machine actually defines mach_##name, which in this file happens before the declaration, hence the warning. To fix this, move define_machine after machine_device_initcall so that the declaration occurs before the definition, which matches how machine_device_initcall and define_machine work throughout arch/powerpc. While we're here, remove some spaces before tabs. Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup") Reported-by: Nick Desaulniers Suggested-by: Ilie Halip Signed-off-by: Nathan Chancellor Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com Signed-off-by: Sasha Levin commit aa3ae3cad9e83bfb0ff38f400bddd35401f6c4c1 Author: Alexey Kardashevskiy Date: Thu Mar 12 18:44:04 2020 +1100 powerpc/prom_init: Pass the "os-term" message to hypervisor [ Upstream commit 74bb84e5117146fa73eb9d01305975c53022b3c3 ] The "os-term" RTAS calls has one argument with a message address of OS termination cause. rtas_os_term() already passes it but the recently added prom_init's version of that missed it; it also does not fill args correctly. This passes the message address and initializes the number of arguments. Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init") Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200312074404.87293-1-aik@ozlabs.ru Signed-off-by: Sasha Levin commit b2c639db78cf7e4f30452903ecce90ddeece4f58 Author: Madhuparna Bhowmik Date: Fri Mar 6 12:22:43 2020 +0530 btrfs: add RCU locks around block group initialization [ Upstream commit 29566c9c773456467933ee22bbca1c2b72a3506c ] The space_info list is normally RCU protected and should be traversed with rcu_read_lock held. There's a warning [29.104756] WARNING: suspicious RCU usage [29.105046] 5.6.0-rc4-next-20200305 #1 Not tainted [29.105231] ----------------------------- [29.105401] fs/btrfs/block-group.c:2011 RCU-list traversed in non-reader section!! pointing out that the locking is missing in btrfs_read_block_groups. However this is not necessary as the list traversal happens at mount time when there's no other thread potentially accessing the list. To fix the warning and for consistency let's add the RCU lock/unlock, the code won't be affected much as it's doing some lightweight operations. Reported-by: Guenter Roeck Signed-off-by: Madhuparna Bhowmik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit b8bc5e7511bc98ea4ad76e5b3ecd9092ccb16535 Author: Domenico Andreoli Date: Mon Mar 23 08:22:15 2020 -0700 hibernate: Allow uswsusp to write to swap [ Upstream commit 56939e014a6c212b317414faa307029e2e80c3b9 ] It turns out that there is one use case for programs being able to write to swap devices, and that is the userspace hibernation code. Quick fix: disable the S_SWAPFILE check if hibernation is configured. Fixes: dc617f29dbe5 ("vfs: don't allow writes to swap files") Reported-by: Domenico Andreoli Reported-by: Marian Klein Signed-off-by: Domenico Andreoli Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Sasha Levin commit 99d3ff43fc502bf08ca74bdce059c72009b1bac3 Author: Willy Wolff Date: Sat Mar 21 09:27:40 2020 +0000 thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state [ Upstream commit ff44f672d74178b3be19d41a169b98b3e391d4ce ] When setting the cooling device current state from userspace via sysfs, the operation fails by returning an -EINVAL. It appears the recent changes with the per-policy frequency QoS introduced a regression as reported by: https://lkml.org/lkml/2020/3/20/599 The function freq_qos_update_request returns 0 or 1 describing update effectiveness, and a negative error code on failure. However, cpufreq_set_cur_state returns 0 on success or an error code otherwise. Consider the QoS update as successful if the function does not return an error. Fixes: 3000ce3c52f8b ("cpufreq: Use per-policy frequency QoS") Signed-off-by: Willy Wolff Acked-by: Viresh Kumar Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200321092740.7vvwfxsebcrznydh@macmini.local Signed-off-by: Sasha Levin commit e648f3ff7888562d97152dd803f949882ce7ecc6 Author: Alex Smith Date: Fri Mar 6 22:06:31 2020 +0100 MIPS: DTS: CI20: add DT node for IR sensor [ Upstream commit f5e8fcf85a25bac26c32a0000dbab5857ead9113 ] The infrared sensor on the CI20 board is connected to a GPIO and can be operated by using the gpio-ir-recv driver. Add a DT node for the sensor to allow that driver to be used. Signed-off-by: Alex Smith Signed-off-by: H. Nikolaus Schaller Reviewed-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 8eacf0577132a74f1416c5b120fb552f01475677 Author: Alexander Gordeev Date: Mon Mar 16 12:39:55 2020 +0100 s390/cpuinfo: fix wrong output when CPU0 is offline [ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ] /proc/cpuinfo should not print information about CPU 0 when it is offline. Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by: Alexander Gordeev Reviewed-by: Heiko Carstens [heiko.carstens@de.ibm.com: shortened commit message] Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit a41add132bc44a1ab1b996c6441da237ead6cea3 Author: Sahitya Tummala Date: Tue Mar 3 19:59:26 2020 +0530 f2fs: Add a new CP flag to help fsck fix resize SPO issues [ Upstream commit c84ef3c5e65ccf99a7a91a4d731ebb5d6331a178 ] Add and set a new CP flag CP_RESIZEFS_FLAG during online resize FS to help fsck fix the metadata mismatch that may happen due to SPO during resize, where SB got updated but CP data couldn't be written yet. fsck errors - Info: CKPT version = 6ed7bccb Wrong user_block_count(2233856) [f2fs_do_mount:3365] Checkpoint is polluted Signed-off-by: Sahitya Tummala Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 06ade45c870291746e963b42e676ba93aa1a2d53 Author: Sahitya Tummala Date: Tue Mar 3 19:59:25 2020 +0530 f2fs: Fix mount failure due to SPO after a successful online resize FS [ Upstream commit 682756827501dc52593bf490f2d437c65ec9efcb ] Even though online resize is successfully done, a SPO immediately after resize, still causes below error in the next mount. [ 11.294650] F2FS-fs (sda8): Wrong user_block_count: 2233856 [ 11.300272] F2FS-fs (sda8): Failed to get valid F2FS checkpoint This is because after FS metadata is updated in update_fs_metadata() if the SBI_IS_DIRTY is not dirty, then CP will not be done to reflect the new user_block_count. Signed-off-by: Sahitya Tummala Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 6b2bfcf3040e4164846bfc2a9a9f82f5b839e4a1 Author: Chao Yu Date: Tue Mar 3 20:09:25 2020 +0800 f2fs: fix to update f2fs_super_block fields under sb_lock [ Upstream commit a4ba5dfc5c88e49bb03385abfdd28c5a0acfbb54 ] Fields in struct f2fs_super_block should be updated under coverage of sb_lock, fix to adjust update_sb_metadata() for that rule. Fixes: 04f0b2eaa3b3 ("f2fs: ioctl for removing a range from F2FS") Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit befe23339890b4318a3b808ad33de5656b602b4b Author: Misono Tomohiro Date: Wed Aug 28 17:01:22 2019 +0900 NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails [ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ] When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is initialized to 2. Therefore we need to call nfs_direct_req_release() twice to release the allocated dreq. Usually it is called in nfs_file_direct_{read, write}() and nfs_direct_complete(). However, current code only calls nfs_direct_req_relese() once if nfs_get_lock_context() fails in nfs_file_direct_{read, write}(). So, that case would result in memory leak. Fix this by adding the missing call. Signed-off-by: Misono Tomohiro Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit ba10abbc08dffe1e485d9eea965cc4643b3d6a4e Author: Kunihiko Hayashi Date: Thu Jan 30 15:52:41 2020 +0900 phy: uniphier-usb3ss: Add Pro5 support [ Upstream commit 9376fa634afc207a3ce99e0957e04948c34d6510 ] Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is equivalent to Pro4. Signed-off-by: Kunihiko Hayashi Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin commit e9141ec88a782d34174d9edf110923d5651dcdf1 Author: Amit Kucheria Date: Thu Mar 12 18:07:01 2020 +0530 drivers: thermal: tsens: Release device in success path [ Upstream commit f22a3bf0d2225fba438c46a25d3ab8823585a5e0 ] We don't currently call put_device in case of successfully initialising the device. So we hold the reference and keep the device pinned forever. Allow control to fall through so we can use same code for success and error paths to put_device. As a part of this fixup, change devm_ioremap_resource to act on the same device pointer as that used to allocate regmap memory. That ensures that we are free to release op->dev after examining its resources. Signed-off-by: Amit Kucheria Reviewed-by: Bjorn Andersson Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/d3996667e9f976bb30e97e301585cb1023be422e.1584015867.git.amit.kucheria@linaro.org Signed-off-by: Sasha Levin commit 60f91837d5d02072a615c07cdc48d0038c24267a Author: Chao Yu Date: Fri Feb 14 17:45:11 2020 +0800 f2fs: fix to show norecovery mount option [ Upstream commit a9117eca1de6b738e713d2142126db2cfbf6fb36 ] Previously, 'norecovery' mount option will be shown as 'disable_roll_forward', fix to show original option name correctly. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 3180eb1431cf43365c24345d5ede76b498620b10 Author: Michael Roth Date: Tue Mar 10 16:11:28 2020 -0500 KVM: PPC: Book3S HV: Fix H_CEDE return code for nested guests [ Upstream commit 1f50cc1705350a4697923203fedd7d8fb1087fe2 ] The h_cede_tm kvm-unit-test currently fails when run inside an L1 guest via the guest/nested hypervisor. ./run-tests.sh -v ... TESTNAME=h_cede_tm TIMEOUT=90s ACCEL= ./powerpc/run powerpc/tm.elf -smp 2,threads=2 -machine cap-htm=on -append "h_cede_tm" FAIL h_cede_tm (2 tests, 1 unexpected failures) While the test relates to transactional memory instructions, the actual failure is due to the return code of the H_CEDE hypercall, which is reported as 224 instead of 0. This happens even when no TM instructions are issued. 224 is the value placed in r3 to execute a hypercall for H_CEDE, and r3 is where the caller expects the return code to be placed upon return. In the case of guest running under a nested hypervisor, issuing H_CEDE causes a return from H_ENTER_NESTED. In this case H_CEDE is specially-handled immediately rather than later in kvmppc_pseries_do_hcall() as with most other hcalls, but we forget to set the return code for the caller, hence why kvm-unit-test sees the 224 return code and reports an error. Guest kernels generally don't check the return value of H_CEDE, so that likely explains why this hasn't caused issues outside of kvm-unit-tests so far. Fix this by setting r3 to 0 after we finish processing the H_CEDE. RHBZ: 1778556 Fixes: 4bad77799fed ("KVM: PPC: Book3S HV: Handle hypercalls correctly when nested") Cc: linuxppc-dev@ozlabs.org Cc: David Gibson Cc: Paul Mackerras Signed-off-by: Michael Roth Reviewed-by: David Gibson Signed-off-by: Paul Mackerras Signed-off-by: Sasha Levin commit ac8c737ddfe9e356cceb4fc0604362654057c9f3 Author: Darrick J. Wong Date: Fri Mar 13 13:57:58 2020 -0700 xfs: fix incorrect test in xfs_alloc_ag_vextent_lastblock [ Upstream commit 77ca1eed5a7d2bf0905562eb1a15aac76bc19fe4 ] When I lifted the code in xfs_alloc_ag_vextent_lastblock out of a loop, I forgot to convert all the accesses to len to be pointer dereferences. Coverity-id: 1457918 Fixes: 5113f8ec3753ed ("xfs: clean up weird while loop in xfs_alloc_ag_vextent_near") Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Reviewed-by: Christoph Hellwig Signed-off-by: Sasha Levin commit d2564bc4ae84417bd618b1ddf9b2fbfd38376e0d Author: Johan Jonker Date: Mon Mar 16 18:46:47 2020 +0100 ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc [ Upstream commit 1a7e99599dffd836fcb720cdc0eaf3cd43d7af4a ] A test with the command below gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder: 'ports' is a required property Fix error by adding a ports wrapper for port@0 and port@1 inside the 'lvds-encoder' node for rk3188-bqedison2qc. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/ bridge/lvds-codec.yaml Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20200316174647.5598-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 709ddeb1a0b9d09a5cd2271b52055bda93057ec3 Author: Murphy Zhou Date: Fri Feb 14 22:34:09 2020 +0800 NFSv4.2: error out when relink swapfile [ Upstream commit f5fdf1243fb750598b46305dd03c553949cfa14f ] This fixes xfstests generic/356 failure on NFSv4.2. Signed-off-by: Murphy Zhou Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit d13e32a306a6e92502b8bfa9ba55771a88bc0217 Author: Trond Myklebust Date: Thu Feb 27 11:01:12 2020 -0500 NFSv4/pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid() [ Upstream commit d911c57a19551c6bef116a3b55c6b089901aacb0 ] Make sure to test the stateid for validity so that we catch instances where the server may have been reusing stateids in nfs_layout_find_inode_by_stateid(). Fixes: 7b410d9ce460 ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers") Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit 6d24247e765dde850cfa9bd3ac1e741cd3fc00ba Author: Trond Myklebust Date: Fri Feb 7 19:32:49 2020 -0500 NFS: alloc_nfs_open_context() must use the file cred when available [ Upstream commit 1d179d6bd67369a52edea8562154b31ee20be1cc ] If we're creating a nfs_open_context() for a specific file pointer, we must use the cred assigned to that file. Fixes: a52458b48af1 ("NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.") Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin commit 1cd62684afb7631f4ea7b5e50da6891bde7ed3b5 Author: Alexandre Belloni Date: Wed Mar 11 23:39:51 2020 +0100 rtc: 88pm860x: fix possible race condition [ Upstream commit 9cf4789e6e4673d0b2c96fa6bb0c35e81b43111a ] The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Also remove the unnecessary error message as the core already prints the info. Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit c8dacecdfc60b1acc0db77223c9af447cdeebe50 Author: Kevin Grandemange Date: Thu Mar 12 15:41:45 2020 +0000 dma-coherent: fix integer overflow in the reserved-memory dma allocation [ Upstream commit 286c21de32b904131f8cf6a36ce40b8b0c9c5da3 ] pageno is an int and the PAGE_SHIFT shift is done on an int, overflowing if the memory is bigger than 2G This can be reproduced using for example a reserved-memory of 4G reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; reserved_dma: buffer@0 { compatible = "shared-dma-pool"; no-map; reg = <0x5 0x00000000 0x1 0x0>; }; }; Signed-off-by: Kevin Grandemange Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin commit c8db441f64d84983e54f6c43d12215f3a0b26835 Author: Lucas Stach Date: Fri Mar 13 11:09:12 2020 +0100 soc: imx: gpc: fix power up sequencing [ Upstream commit e0ea2d11f8a08ba7066ff897e16c5217215d1e68 ] Currently we wait only until the PGC inverts the isolation setting before disabling the peripheral clocks. This doesn't ensure that the reset is properly propagated through the peripheral devices in the power domain. Wait until the PGC signals that the power up request is done and wait a bit for resets to propagate before disabling the clocks. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 180b01b985a937fc073aa42d7c7b82b9fa97ab1d Author: Amit Kucheria Date: Fri Mar 6 03:30:15 2020 +0530 arm64: dts: marvell: Fix cpu compatible for AP807-quad [ Upstream commit d136d2588b21b1a07515632ed61120c9f262909b ] make -k ARCH=arm64 dtbs_check shows the following errors. Fix them by removing the "arm,armv8" compatible. /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@0: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@0: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long CHECK arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dt.yaml /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@1: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@1: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@100: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@100: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@101: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9130-db.dt.yaml: cpu@101: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@0: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@0: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@1: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@1: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@100: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@100: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@101: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9131-db.dt.yaml: cpu@101: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@0: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@0: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@1: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@1: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@100: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@100: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@101: compatible: Additional items are not allowed ('arm,armv8' was unexpected) /home/amit/work/builds/build-check/arch/arm64/boot/dts/marvell/cn9132-db.dt.yaml: cpu@101: compatible: ['arm,cortex-a72', 'arm,armv8'] is too long Signed-off-by: Amit Kucheria Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin commit 1d3cd1a6f90abd21271dbbbf138e9e8aed7bfb54 Author: Russell King Date: Tue Feb 25 11:45:12 2020 +0000 arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay [ Upstream commit 46f94c7818e7ab82758fca74935ef3d454340b4e ] If the mv88e6xxx DSA driver is built as a module, it causes the ethernet driver to re-probe when it's loaded. This in turn causes the gigabit PHY to be momentarily reset and reprogrammed. However, we attempt to reprogram the PHY immediately after deasserting reset, and the PHY ignores the writes. This results in the PHY operating in the wrong mode, and the copper link states down. Set a reset deassert delay of 10ms for the gigabit PHY to avoid this. Fixes: babc5544c293 ("arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal") Signed-off-by: Russell King Acked-by: Baruch Siach Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin commit 5d6f6d2c66be8b0074e641104268550bdcc31484 Author: Tomasz Maciej Nowak Date: Thu Feb 27 17:52:32 2020 +0100 arm64: dts: marvell: espressobin: add ethernet alias [ Upstream commit 5253cb8c00a6f4356760efb38bca0e0393aa06de ] The maker of this board and its variants, stores MAC address in U-Boot environment. Add alias for bootloader to recognise, to which ethernet node inject the factory MAC address. Signed-off-by: Tomasz Maciej Nowak Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin commit 94b6df1cf6761672a03f733eea81f14482d2b70c Author: Tommi Rantala Date: Thu Mar 12 07:43:53 2020 -0700 xfs: fix regression in "cleanup xfs_dir2_block_getdents" [ Upstream commit 3d28e7e278913a267b1de360efcd5e5274065ce2 ] Commit 263dde869bd09 ("xfs: cleanup xfs_dir2_block_getdents") introduced a getdents regression, when it converted the pointer arithmetics to offset calculations: offset is updated in the loop already for the next iteration, but the updated offset value is used incorrectly in two places, where we should have used the not-yet-updated value. This caused for example "git clean -ffdx" failures to cleanup certain directory structures when running in a container. Fix the regression by making sure we use proper offset in the loop body. Thanks to Christoph Hellwig for suggestion how to best fix the code. Cc: Christoph Hellwig Fixes: 263dde869bd09 ("xfs: cleanup xfs_dir2_block_getdents") Signed-off-by: Tommi Rantala Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Signed-off-by: Sasha Levin commit fd6d36892af482fafb7ed0c34a0efc59b865cf51 Author: Darrick J. Wong Date: Wed Mar 11 10:37:53 2020 -0700 xfs: fix use-after-free when aborting corrupt attr inactivation [ Upstream commit 496b9bcd62b0b3a160be61e3265a086f97adcbd3 ] Log the corrupt buffer before we release the buffer. Fixes: a5155b870d687 ("xfs: always log corruption errors") Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Sasha Levin commit 595f6853a92cb47d7da46c7a583693c9c5182cc6 Author: Jon Hunter Date: Fri Feb 14 13:53:53 2020 +0000 arm64: tegra: Fix Tegra194 PCIe compatible string [ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ] If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled then this can cause the kernel to incorrectly probe the generic designware PCIe platform driver instead of the Tegra194 designware PCIe driver. This causes a boot failure on Tegra194 because the necessary configuration to access the hardware is not performed. The order in which the compatible strings are populated in Device-Tree is not relevant in this case, because the kernel will attempt to probe the device as soon as a driver is loaded and if the generic designware PCIe driver is loaded first, then this driver will be probed first. Therefore, to fix this problem, remove the "snps,dw-pcie" string from the compatible string as we never want this driver to be probe on Tegra194. Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT") Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 3cfb1d2a5744c230da7cc9639c8d6bd21f1653a7 Author: Vidya Sagar Date: Tue Mar 3 23:40:50 2020 +0530 arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194 [ Upstream commit 0c988b731e6430f0081991fdb4f63f7fc837df9a ] Add endpoint mode controllers nodes for the dual mode PCIe controllers present in Tegra194 SoC. Signed-off-by: Vidya Sagar Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 84e39c0b286090a0de764b1d9344799f56f34992 Author: Sowjanya Komatineni Date: Mon Jan 13 23:24:09 2020 -0800 clk: tegra: Fix Tegra PMC clock out parents [ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ] Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by: Dmitry Osipenko Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit b71e140fe3a1343e9d0ef76197145e71641e35d9 Author: Dmitry Osipenko Date: Mon Mar 9 00:51:43 2020 +0300 power: supply: bq27xxx_battery: Silence deferred-probe error [ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ] The driver fails to probe with -EPROBE_DEFER if battery's power supply (charger driver) isn't ready yet and this results in a bit noisy error message in KMSG during kernel's boot up. Let's silence the harmless error message. Signed-off-by: Dmitry Osipenko Reviewed-by: Andrew F. Davis Reviewed-by: Pali Rohár Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 857da3e14acc2afbd432fea6a5d6150a53d600a1 Author: Jernej Skrabec Date: Sat Jan 25 00:20:10 2020 +0100 arm64: dts: allwinner: a64: Fix display clock register range [ Upstream commit 3e9a1a8b7f811de3eb1445d72f68766b704ad17c ] Register range of display clocks is 0x10000, as it can be seen from DE2 documentation. Fix it. Signed-off-by: Jernej Skrabec Fixes: 2c796fc8f5dbd ("arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU") [wens@csie.org: added fixes tag] Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin commit e13b8ceb4b43c3b8b6bb936adb2d6a6697210865 Author: Dmitry Osipenko Date: Tue Feb 25 02:58:36 2020 +0300 memory: tegra: Correct debugfs clk rate-range on Tegra124 [ Upstream commit 141267bffd1dc19a76e4d50e3e4829f85a806875 ] Correctly set clk rate-range if number of available timings is zero. This fixes noisy "invalid range [4294967295, 0]" error messages during boot. Fixes: 6b9acd935546 ("memory: tegra: Refashion EMC debugfs interface on Tegra124") Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 8a2864d65873300e9132f1e12ee7745bb5075e1b Author: Dmitry Osipenko Date: Tue Feb 25 02:58:35 2020 +0300 memory: tegra: Correct debugfs clk rate-range on Tegra30 [ Upstream commit a53670e1a734ba56fac84cf2b93b838bd4a6b835 ] Correctly set clk rate-range if number of available timings is zero. This fixes noisy "invalid range [4294967295, 0]" error messages during boot. Fixes: 8cee32b40040 ("memory: tegra: Implement EMC debugfs interface on Tegra30") Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 58db3e735afeeb2d830516449d45edd198eac174 Author: Dmitry Osipenko Date: Tue Feb 25 02:58:34 2020 +0300 memory: tegra: Correct debugfs clk rate-range on Tegra20 [ Upstream commit 2243af41115d0e36e6414df6dd2a0386e022d9f8 ] Correctly set clk rate-range if number of available timings is zero. This fixes noisy "invalid range [4294967295, 0]" error messages during boot. Fixes: 8209eefa3d37 ("memory: tegra: Implement EMC debugfs interface on Tegra20") Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit dad4044dbbd69f85f86bc65df1e8e046eec16ce5 Author: Dave Jiang Date: Tue Mar 10 10:50:30 2020 -0700 dmaengine: idxd: reflect shadow copy of traffic class programming [ Upstream commit a1fcaf07ec718bb1f11e29e952c9a4cb733d57a5 ] The traffic class are set to -1 at initialization until the user programs them. If the user choose not to, the driver will program appropriate defaults. The driver also needs to update the shadowed copies of the values after doing the programming. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Yixin Zhang Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/158386263076.10898.4586509576813094559.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit f50a08556d46a213547e1727ff0d697fdc4021c7 Author: Johan Jonker Date: Sat Mar 7 14:48:37 2020 +0100 ARM: dts: rockchip: fix vqmmc-supply property name for rk3188-bqedison2qc [ Upstream commit 9cd568dc588c5d168615bf34f325fabe33b2c9a0 ] A test with the command below does not detect all errors in combination with 'additionalProperties: false' and allOf: - $ref: "synopsys-dw-mshc-common.yaml#" allOf: - $ref: "mmc-controller.yaml#" 'additionalProperties' applies to all properties that are not accounted-for by 'properties' or 'patternProperties' in the immediate schema. First when we combine rockchip-dw-mshc.yaml, synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: mmc@10218000: 'vmmcq-supply' does not match any of the regexes: '^.*@[0-9]+$', '^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)| uhs-(sdr(12|25|50|104)|ddr50))$', 'pinctrl-[0-9]+' 'vmmcq-supply' is not a valid property name for mmc nodes. Fix this error by renaming it to 'vqmmc-supply'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20200307134841.13803-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 0563bdd84b98f0d64ff63705580607c9eb271a03 Author: Chao Yu Date: Fri Feb 28 18:08:46 2020 +0800 f2fs: fix to avoid use-after-free in f2fs_write_multi_pages() [ Upstream commit 95978caa138948054e06d00bfc3432b518699f1b ] In compress cluster, if physical block number is less than logic page number, race condition will cause use-after-free issue as described below: - f2fs_write_compressed_pages - fio.page = cic->rpages[0]; - f2fs_outplace_write_data - f2fs_compress_write_end_io - kfree(cic->rpages); - kfree(cic); - fio.page = cic->rpages[1]; f2fs_write_multi_pages+0xfd0/0x1a98 f2fs_write_data_pages+0x74c/0xb5c do_writepages+0x64/0x108 __writeback_single_inode+0xdc/0x4b8 writeback_sb_inodes+0x4d0/0xa68 __writeback_inodes_wb+0x88/0x178 wb_writeback+0x1f0/0x424 wb_workfn+0x2f4/0x574 process_one_work+0x210/0x48c worker_thread+0x2e8/0x44c kthread+0x110/0x120 ret_from_fork+0x10/0x18 Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit f642efe06ffd4bd872f9e689ce2a95c002ac1e2d Author: Jaegeuk Kim Date: Thu Mar 5 15:20:26 2020 -0800 f2fs: fix wrong check on F2FS_IOC_FSSETXATTR [ Upstream commit 99eabb914e0f870445d065e83e857507f9728a33 ] This fixes the incorrect failure when enabling project quota on casefold-enabled file. Cc: Daniel Rosenberg Cc: kernel-team@android.com Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 00b695c16e5f93bb95fc48467913fda4bd570576 Author: Brian Foster Date: Fri Feb 21 07:36:24 2020 -0800 xfs: fix iclog release error check race with shutdown [ Upstream commit 6b789c337a5963ae57cbc7fe9e41488c40a9b014 ] Prior to commit df732b29c8 ("xfs: call xlog_state_release_iclog with l_icloglock held"), xlog_state_release_iclog() always performed a locked check of the iclog error state before proceeding into the sync state processing code. As of this commit, part of xlog_state_release_iclog() was open-coded into xfs_log_release_iclog() and as a result the locked error state check was lost. The lockless check still exists, but this doesn't account for the possibility of a race with a shutdown being performed by another task causing the iclog state to change while the original task waits on ->l_icloglock. This has reproduced very rarely via generic/475 and manifests as an assert failure in __xlog_state_release_iclog() due to an unexpected iclog state. Restore the locked error state check in xlog_state_release_iclog() to ensure that an iclog state update via shutdown doesn't race with the iclog release state processing code. Fixes: df732b29c807 ("xfs: call xlog_state_release_iclog with l_icloglock held") Reported-by: Zorro Lang Signed-off-by: Brian Foster Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Sasha Levin commit f06977f73ec0b3f0c14bc1005ffcb43edbb81796 Author: Andrii Nakryiko Date: Sun Mar 1 00:10:43 2020 -0800 bpf: Reliably preserve btf_trace_xxx types [ Upstream commit 441420a1f0b3031f228453697406c86f110e59d4 ] btf_trace_xxx types, crucial for tp_btf BPF programs (raw tracepoint with verifier-checked direct memory access), have to be preserved in kernel BTF to allow verifier do its job and enforce type/memory safety. It was reported ([0]) that for kernels built with Clang current type-casting approach doesn't preserve these types. This patch fixes it by declaring an anonymous union for each registered tracepoint, capturing both struct bpf_raw_event_map information, as well as recording btf_trace_##call type reliably. Structurally, it's still the same content as for a plain struct bpf_raw_event_map, so no other changes are necessary. [0] https://github.com/iovisor/bcc/issues/2770#issuecomment-591007692 Fixes: e8c423fb31fa ("bpf: Add typecast to raw_tracepoints to help BTF generation") Reported-by: Wenbo Zhang Signed-off-by: Andrii Nakryiko Signed-off-by: Alexei Starovoitov Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/20200301081045.3491005-2-andriin@fb.com Signed-off-by: Sasha Levin commit 645050b5c5939998ee447770e8a81dd43bd67ecb Author: Sahitya Tummala Date: Tue Feb 18 09:19:07 2020 +0530 f2fs: fix the panic in do_checkpoint() [ Upstream commit bf22c3cc8ce71454dddd772284773306a68031d8 ] There could be a scenario where f2fs_sync_meta_pages() will not ensure that all F2FS_DIRTY_META pages are submitted for IO. Thus, resulting in the below panic in do_checkpoint() - f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) && !f2fs_cp_error(sbi)); This can happen in a low-memory condition, where shrinker could also be doing the writepage operation (stack shown below) at the same time when checkpoint is running on another core. schedule down_write f2fs_submit_page_write -> by this time, this page in page cache is tagged as PAGECACHE_TAG_WRITEBACK and PAGECACHE_TAG_DIRTY is cleared, due to which f2fs_sync_meta_pages() cannot sync this page in do_checkpoint() path. f2fs_do_write_meta_page __f2fs_write_meta_page f2fs_write_meta_page shrink_page_list shrink_inactive_list shrink_node_memcg shrink_node kswapd Signed-off-by: Sahitya Tummala Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 8e8542437bb4070423c9754d5ba270ffdbae8c8d Author: Chao Yu Date: Mon Feb 24 19:20:16 2020 +0800 f2fs: fix to avoid potential deadlock [ Upstream commit df77fbd8c5b222c680444801ffd20e8bbc90a56e ] Using f2fs_trylock_op() in f2fs_write_compressed_pages() to avoid potential deadlock like we did in f2fs_write_single_data_page(). Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit ef89145b8bfe79bae0ed2c9bcdc5a6606c8e75e1 Author: Torsten Duwe Date: Tue Feb 25 15:34:30 2020 +0100 s390/crypto: explicitly memzero stack key material in aes_s390.c [ Upstream commit 4a559cd15dbc79958fa9b18ad4e8afe4a0bf4744 ] aes_s390.c has several functions which allocate space for key material on the stack and leave the used keys there. It is considered good practice to clean these locations before the function returns. Link: https://lkml.kernel.org/r/20200221165511.GB6928@lst.de Signed-off-by: Torsten Duwe Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 1c6b3a695c391a2171bc70b87d2292fa0d521523 Author: Aya Levin Date: Tue Feb 11 14:32:49 2020 -0800 net/mlx5e: Enforce setting of a single FEC mode [ Upstream commit 4bd9d5070b92da012f2715cf8e4859acb78b8f35 ] Ethtool command allow setting of several FEC modes in a single set command. The driver can only set a single FEC mode at a time. With this patch driver will reply not-supported on setting several FEC modes. Signed-off-by: Aya Levin Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin commit 521092d99a8e57b73dfe4c919316efea2c464fb9 Author: Eneas U de Queiroz Date: Fri Feb 7 12:02:25 2020 -0300 crypto: qce - use cryptlen when adding extra sgl [ Upstream commit d6364b8128439a8c0e381f80c38667de9f15eef8 ] The qce crypto driver appends an extra entry to the dst sgl, to maintain private state information. When the gcm driver sends requests to the ctr skcipher, it passes the authentication tag after the actual crypto payload, but it must not be touched. Commit 1336c2221bee ("crypto: qce - save a sg table slot for result buf") limited the destination sgl to avoid overwriting the authentication tag but it assumed the tag would be in a separate sgl entry. This is not always the case, so it is better to limit the length of the destination buffer to req->cryptlen before appending the result buf. Signed-off-by: Eneas U de Queiroz Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 255969d3a9cf1dd9ee2e41ede801fd6c5a5345e5 Author: Anson Huang Date: Thu Jan 16 14:50:49 2020 +0800 clk: imx: pll14xx: Add new frequency entries for pll1443x table [ Upstream commit 57795654fb553a78f07a9f92d87fb2582379cd93 ] Add new frequency entries to pll1443x table to meet different display settings requirement. Signed-off-by: Anson Huang Reviewed-by: Peng Fan Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 6e4099a0005dae6e420b48dc2765578f28b4f9ba Author: Claudiu Beznea Date: Fri Jan 17 13:36:46 2020 +0200 clk: at91: usb: continue if clk_hw_round_rate() return zero [ Upstream commit b0ecf1c6c6e82da4847900fad0272abfd014666d ] clk_hw_round_rate() may call round rate function of its parents. In case of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are controlled by clk-sam9x60-pll.c driver. The round rate function for this driver is sam9x60_pll_round_rate() which call in turn sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the proper range (rate < characteristics->output[0].min && rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will return a negative number to its caller (called by clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in case a negative number is returned by clk_core_round_rate_nolock(). With this, the USB clock will continue its rate computation even caller of clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60 may not chose the best parent. I detected this after a suspend/resume cycle on SAM9X60. Signed-off-by: Claudiu Beznea Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit d54af968eec82a400ae296f31e5b20e2a92cd875 Author: Stephen Boyd Date: Wed Feb 5 15:27:59 2020 -0800 clk: Don't cache errors from clk_ops::get_phase() [ Upstream commit f21cf9c77ee82ef8adfeb2143adfacf21ec1d5cc ] We don't check for errors from clk_ops::get_phase() before storing away the result into the clk_core::phase member. This can lead to some fairly confusing debugfs information if these ops do return an error. Let's skip the store when this op fails to fix this. While we're here, move the locking outside of clk_core_get_phase() to simplify callers from the debugfs side. Cc: Douglas Anderson Cc: Heiko Stuebner Cc: Jerome Brunet Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20200205232802.29184-2-sboyd@kernel.org Acked-by: Jerome Brunet Signed-off-by: Sasha Levin commit 6b5fed6d7bc046833d2ffcdd65110ad2f3e5b7b8 Author: Bob Peterson Date: Wed Nov 13 11:47:09 2019 -0600 gfs2: clear ail1 list when gfs2 withdraws [ Upstream commit 30fe70a85a909a23dcbc2c628ca6655b2c85e7a1 ] This patch fixes a bug in which function gfs2_log_flush can get into an infinite loop when a gfs2 file system is withdrawn. The problem is the infinite loop "for (;;)" in gfs2_log_flush which would never finish because the io error and subsequent withdraw prevented the items from being taken off the ail list. This patch tries to clean up the mess by allowing withdraw situations to move not-in-flight buffer_heads to the ail2 list, where they will be dealt with later. Signed-off-by: Bob Peterson Reviewed-by: Andreas Gruenbacher Signed-off-by: Sasha Levin commit 057843ef0833fa33846e57902ff11832b5b0ed2b Author: xinhui pan Date: Wed Jan 15 14:07:45 2020 +0800 drm/ttm: flush the fence on the bo after we individualize the reservation object [ Upstream commit 1bbcf69e42fe7fd49b6f4339c970729d0e343753 ] As we move the ttm_bo_individualize_resv() upwards, we need flush the copied fence too. Otherwise the driver keeps waiting for fence. run&Kill kfdtest, then perf top. 25.53% [ttm] [k] ttm_bo_delayed_delete 24.29% [kernel] [k] dma_resv_test_signaled_rcu 19.72% [kernel] [k] ww_mutex_lock Fix: 378e2d5b("drm/ttm: fix ttm_bo_cleanup_refs_or_queue once more") Signed-off-by: xinhui pan Reviewed-by: Christian König Link: https://patchwork.freedesktop.org/series/72339/ Signed-off-by: Christian König Signed-off-by: Sasha Levin commit 4c1bf587687a0ad2ada910e7817394cb80520560 Author: Paolo Valente Date: Sat Mar 21 10:45:21 2020 +0100 block, bfq: invoke flush_idle_tree after reparent_active_queues in pd_offline commit 4d38a87fbb77fb9ff2ff4e914162a8ae6453eff5 upstream. In bfq_pd_offline(), the function bfq_flush_idle_tree() is invoked to flush the rb tree that contains all idle entities belonging to the pd (cgroup) being destroyed. In particular, bfq_flush_idle_tree() is invoked before bfq_reparent_active_queues(). Yet the latter may happen to add some entities to the idle tree. It happens if, in some of the calls to bfq_bfqq_move() performed by bfq_reparent_active_queues(), the queue to move is empty and gets expired. This commit simply reverses the invocation order between bfq_flush_idle_tree() and bfq_reparent_active_queues(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit c49d414acda895e37ad54550c083a7657600d78b Author: Paolo Valente Date: Sat Mar 21 10:45:20 2020 +0100 block, bfq: make reparent_leaf_entity actually work only on leaf entities commit 576682fa52cbd95deb3773449566274f206acc58 upstream. bfq_reparent_leaf_entity() reparents the input leaf entity (a leaf entity represents just a bfq_queue in an entity tree). Yet, the input entity is guaranteed to always be a leaf entity only in two-level entity trees. In this respect, because of the error fixed by commit 14afc5936197 ("block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()"), all (wrongly collapsed) entity trees happened to actually have only two levels. After the latter commit, this does not hold any longer. This commit fixes this problem by modifying bfq_reparent_leaf_entity(), so that it searches an active leaf entity down the path that stems from the input entity. Such a leaf entity is guaranteed to exist when bfq_reparent_leaf_entity() is invoked. Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit d1efbd1fdd35a8d1de91285db9b4ad3692b09c10 Author: Paolo Valente Date: Sat Mar 21 10:45:19 2020 +0100 block, bfq: turn put_queue into release_process_ref in __bfq_bic_change_cgroup commit c8997736650060594845e42c5d01d3118aec8d25 upstream. A bfq_put_queue() may be invoked in __bfq_bic_change_cgroup(). The goal of this put is to release a process reference to a bfq_queue. But process-reference releases may trigger also some extra operation, and, to this goal, are handled through bfq_release_process_ref(). So, turn the invocation of bfq_put_queue() into an invocation of bfq_release_process_ref(). Tested-by: cki-project@redhat.com Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 0e51f93f8866dbcc92ad0dbb2514d906124b0181 Author: David Howells Date: Fri Apr 10 15:23:27 2020 +0100 afs: Fix race between post-modification dir edit and readdir/d_revalidate commit 2105c2820d366b76f38e6ad61c75771881ecc532 upstream. AFS directories are retained locally as a structured file, with lookup being effected by a local search of the file contents. When a modification (such as mkdir) happens, the dir file content is modified locally rather than redownloading the directory. The directory contents are accessed in a number of ways, with a number of different locks schemes: (1) Download of contents - dvnode->validate_lock/write in afs_read_dir(). (2) Lookup and readdir - dvnode->validate_lock/read in afs_dir_iterate(), downgrading from (1) if necessary. (3) d_revalidate of child dentry - dvnode->validate_lock/read in afs_do_lookup_one() downgrading from (1) if necessary. (4) Edit of dir after modification - page locks on individual dir pages. Unfortunately, because (4) uses different locking scheme to (1) - (3), nothing protects against the page being scanned whilst the edit is underway. Even download is not safe as it doesn't lock the pages - relying instead on the validate_lock to serialise as a whole (the theory being that directory contents are treated as a block and always downloaded as a block). Fix this by write-locking dvnode->validate_lock around the edits. Care must be taken in the rename case as there may be two different dirs - but they need not be locked at the same time. In any case, once the lock is taken, the directory version must be rechecked, and the edit skipped if a later version has been downloaded by revalidation (there can't have been any local changes because the VFS holds the inode lock, but there can have been remote changes). Fixes: 63a4681ff39c ("afs: Locally edit directory data for mkdir/create/unlink/...") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman commit 0c127d58c6205325dee90363d8a4ef82e3d587c0 Author: David Howells Date: Sat Apr 11 08:50:45 2020 +0100 afs: Fix afs_d_validate() to set the right directory version commit 40fc81027f892284ce31f8b6de1e497f5b47e71f upstream. If a dentry's version is somewhere between invalid_before and the current directory version, we should be setting it forward to the current version, not backwards to the invalid_before version. Note that we're only doing this at all because dentry::d_fsdata isn't large enough on a 32-bit system. Fix this by using a separate variable for invalid_before so that we don't accidentally clobber the current dir version. Fixes: a4ff7401fbfa ("afs: Keep track of invalid-before version for dentry coherency") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman commit 85261f5dcbaf4a9335fd69238b238e8a67f54af7 Author: David Howells Date: Wed Apr 8 20:56:20 2020 +0100 afs: Fix rename operation status delivery commit b98f0ec91c42d87a70da42726b852ac8d78a3257 upstream. The afs_deliver_fs_rename() and yfs_deliver_fs_rename() functions both only decode the second file status returned unless the parent directories are different - unfortunately, this means that the xdr pointer isn't advanced and the volsync record will be read incorrectly in such an instance. Fix this by always decoding the second status into the second status/callback block which wasn't being used if the dirs were the same. The afs_update_dentry_version() calls that update the directory data version numbers on the dentries can then unconditionally use the second status record as this will always reflect the state of the destination dir (the two records will be identical if the destination dir is the same as the source dir) Fixes: 260a980317da ("[AFS]: Add "directory write" support.") Fixes: 30062bd13e36 ("afs: Implement YFS support in the fs client") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman commit 68935b7f66d6feeab4552c97e89632e20d62c0a9 Author: David Howells Date: Wed Apr 8 17:32:10 2020 +0100 afs: Fix decoding of inline abort codes from version 1 status records commit 3e0d9892c0e7fa426ca6bf921cb4b543ca265714 upstream. If we're decoding an AFSFetchStatus record and we see that the version is 1 and the abort code is set and we're expecting inline errors, then we store the abort code and ignore the remaining status record (which is correct), but we don't set the flag to say we got a valid abort code. This can affect operation of YFS.RemoveFile2 when removing a file and the operation of {,Y}FS.InlineBulkStatus when prospectively constructing or updating of a set of inodes during a lookup. Fix this to indicate the reception of a valid abort code. Fixes: a38a75581e6e ("afs: Fix unlink to handle YFS.RemoveFile2 better") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman commit eb3723a89384433ad18f68bd7dc7f37c9bbc2433 Author: David Howells Date: Wed Apr 8 16:13:20 2020 +0100 afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus() commit c72057b56f7e24865840a6961d801a7f21d30a5f upstream. If we receive a status record that has VNOVNODE set in the abort field, xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() don't advance the XDR pointer, thereby corrupting anything subsequent decodes from the same block of data. This has the potential to affect AFS.InlineBulkStatus and YFS.InlineBulkStatus operation, but probably doesn't since the status records are extracted as individual blocks of data and the buffer pointer is reset between blocks. It does affect YFS.RemoveFile2 operation, corrupting the volsync record - though that is not currently used. Other operations abort the entire operation rather than returning an error inline, in which case there is no decoding to be done. Fix this by unconditionally advancing the xdr pointer. Fixes: 684b0f68cf1c ("afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman commit 85c52f28bdb4d23af518f8cb06e88a5e58315b8c Author: Tianyu Lan Date: Mon Apr 6 08:53:31 2020 -0700 x86/Hyper-V: Report crash data in die() when panic_on_oops is set commit f3a99e761efa616028b255b4de58e9b5b87c5545 upstream. When oops happens with panic_on_oops unset, the oops thread is killed by die() and system continues to run. In such case, guest should not report crash register data to host since system still runs. Check panic_on_oops and return directly in hyperv_report_panic() when the function is called in the die() and panic_on_oops is unset. Fix it. Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful") Signed-off-by: Tianyu Lan Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu Signed-off-by: Greg Kroah-Hartman commit 3e68e423a60002b8a2e6042008d8dff23244ac5d Author: Tianyu Lan Date: Mon Apr 6 08:53:30 2020 -0700 x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set commit 040026df7088c56ccbad28f7042308f67bde63df upstream. When sysctl_record_panic_msg is not set, the panic will not be reported to Hyper-V via hyperv_report_panic_msg(). So the crash should be reported via hyperv_report_panic(). Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley Signed-off-by: Tianyu Lan Link: https://lore.kernel.org/r/20200406155331.2105-6-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu Signed-off-by: Greg Kroah-Hartman commit c3e090ce368986f427ca70b3e6f391ef1461bd20 Author: Tianyu Lan Date: Mon Apr 6 08:53:29 2020 -0700 x86/Hyper-V: Report crash register data or kmsg before running crash kernel commit a11589563e96bf262767294b89b25a9d44e7303b upstream. We want to notify Hyper-V when a Linux guest VM crash occurs, so there is a record of the crash even when kdump is enabled. But crash_kexec_post_notifiers defaults to "false", so the kdump kernel runs before the notifiers and Hyper-V never gets notified. Fix this by always setting crash_kexec_post_notifiers to be true for Hyper-V VMs. Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley Signed-off-by: Tianyu Lan Link: https://lore.kernel.org/r/20200406155331.2105-5-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu Signed-off-by: Greg Kroah-Hartman commit eec9231fae6af74bf1844ed9df553ffe3c425b33 Author: Tianyu Lan Date: Mon Apr 6 08:53:28 2020 -0700 x86/Hyper-V: Trigger crash enlightenment only once during system crash. commit 73f26e526f19afb3a06b76b970a76bcac2cafd05 upstream. When a guest VM panics, Hyper-V should be notified only once via the crash synthetic MSRs. Current Linux code might write these crash MSRs twice during a system panic: 1) hyperv_panic/die_event() calling hyperv_report_panic() 2) hv_kmsg_dump() calling hyperv_report_panic_msg() Fix this by not calling hyperv_report_panic() if a kmsg dump has been successfully registered. The notification will happen later via hyperv_report_panic_msg(). Fixes: 7ed4325a44ea ("Drivers: hv: vmbus: Make panic reporting to be more useful") Reviewed-by: Michael Kelley Signed-off-by: Tianyu Lan Link: https://lore.kernel.org/r/20200406155331.2105-4-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu Signed-off-by: Greg Kroah-Hartman commit a964cdcfd263b5181ce03c39b0f6a337725e8fd5 Author: Tianyu Lan Date: Mon Apr 6 08:53:27 2020 -0700 x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump commit 7f11a2cc10a4ae3a70e2c73361f4a9a33503539b upstream. If kmsg_dump_register() fails, hv_panic_page will not be used anywhere. So free and reset it. Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley Signed-off-by: Tianyu Lan Link: https://lore.kernel.org/r/20200406155331.2105-3-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu Signed-off-by: Greg Kroah-Hartman commit caeeb3787167c884b955404a7e669fd77f267e44 Author: Tianyu Lan Date: Mon Apr 6 08:53:26 2020 -0700 x86/Hyper-V: Unload vmbus channel in hv panic callback commit 74347a99e73ae00b8385f1209aaea193c670f901 upstream. When kdump is not configured, a Hyper-V VM might still respond to network traffic after a kernel panic when kernel parameter panic=0. The panic CPU goes into an infinite loop with interrupts enabled, and the VMbus driver interrupt handler still works because the VMbus connection is unloaded only in the kdump path. The network responses make the other end of the connection think the VM is still functional even though it has panic'ed, which could affect any failover actions that should be taken. Fix this by unloading the VMbus connection during the panic process. vmbus_initiate_unload() could then be called twice (e.g., by hyperv_panic_event() and hv_crash_handler(), so reset the connection state in vmbus_initiate_unload() to ensure the unload is done only once. Fixes: 81b18bce48af ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by: Michael Kelley Signed-off-by: Tianyu Lan Link: https://lore.kernel.org/r/20200406155331.2105-2-Tianyu.Lan@microsoft.com Signed-off-by: Wei Liu Signed-off-by: Greg Kroah-Hartman commit 81276604d647cb968802b10fdae469eef01497ff Author: Frank Rowand Date: Thu Apr 16 16:42:49 2020 -0500 of: overlay: kmemleak in dup_and_fixup_symbol_prop() commit 478ff649b1c8eb2409b1a54fb75eb46f7c29f140 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman commit 2ea37822077efef0e92f28b487aad329f95dfad8 Author: Frank Rowand Date: Thu Apr 16 16:42:48 2020 -0500 of: unittest: kmemleak in of_unittest_overlay_high_level() commit 145fc138f9aae4f9e1331352e301df28e16aed35 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman commit 5cdd186311860632c2d7aed4e774486b75ce05c4 Author: Frank Rowand Date: Thu Apr 16 16:42:47 2020 -0500 of: unittest: kmemleak in of_unittest_platform_populate() commit 216830d2413cc61be3f76bc02ffd905e47d2439e upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman commit 52a76fc6b59b1b727be6fd297e612fbd68fc677d Author: Frank Rowand Date: Thu Apr 16 16:42:46 2020 -0500 of: unittest: kmemleak on changeset destroy commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 1 of 5. of_unittest_changeset() reaches deeply into the dynamic devicetree functions. Several nodes were left with an elevated reference count and thus were not properly cleaned up. Fix the reference counts so that the memory will be freed. Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. Signed-off-by: Frank Rowand Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman commit 98d3c852e63b49129515dd18c875999efaf8530a Author: Magnus Karlsson Date: Tue Apr 14 09:35:15 2020 +0200 xsk: Add missing check on user supplied headroom size commit 99e3a236dd43d06c65af0a2ef9cb44306aef6e02 upstream. Add a check that the headroom cannot be larger than the available space in the chunk. In the current code, a malicious user can set the headroom to a value larger than the chunk size minus the fixed XDP headroom. That way packets with a length larger than the supported size in the umem could get accepted and result in an out-of-bounds write. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: Bui Quang Minh Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225 Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com Signed-off-by: Greg Kroah-Hartman commit 59da092eabc4911431945f37659a8659a9684998 Author: Takashi Iwai Date: Mon Apr 13 10:20:29 2020 +0200 ALSA: hda: Don't release card at firmware loading error commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 upstream. At the error path of the firmware loading error, the driver tries to release the card object and set NULL to drvdata. This may be referred badly at the possible PM action, as the driver itself is still bound and the PM callbacks read the card object. Instead, we continue the probing as if it were no option set. This is often a better choice than the forced abort, too. Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8d2e626d898c6179c3d264ac3e6eb6e8fd2b232f Author: Ilya Dryomov Date: Mon Mar 16 17:16:28 2020 +0100 rbd: don't test rbd_dev->opts in rbd_dev_image_release() commit b8776051529230f76e464d5ffc5d1cf8465576bf upstream. rbd_dev->opts is used to distinguish between the image that is being mapped and a parent. However, because we no longer establish watch for read-only mappings, this test is imprecise and results in unnecessary rbd_unregister_watch() calls. Make it consistent with need_watch in rbd_dev_image_probe(). Fixes: b9ef2b8858a0 ("rbd: don't establish watch for read-only mappings") Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit a62bf759cfae86c5db2a38f5baf2270046c5a7d6 Author: Ilya Dryomov Date: Mon Mar 16 15:52:54 2020 +0100 rbd: call rbd_dev_unprobe() after unwatching and flushing notifies commit 952c48b0ed18919bff7528501e9a3fff8a24f8cd upstream. rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(), including rbd_dev_header_info(), which means that rbd_dev_header_info() isn't supposed to be called after rbd_dev_unprobe(). However, rbd_dev_image_release() calls rbd_dev_unprobe() before rbd_unregister_watch(). This is racy because a header update notify can sneak in: "rbd unmap" thread ceph-watch-notify worker rbd_dev_image_release() rbd_dev_unprobe() free and zero out header rbd_watch_cb() rbd_dev_refresh() rbd_dev_header_info() read in header The same goes for "rbd map" because rbd_dev_image_probe() calls rbd_dev_unprobe() on errors. In both cases this results in a memory leak. Fixes: fd22aef8b47c ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()") Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit c4ac5c5b98321d57f6446b6b564d88b5c89dc42b Author: Ilya Dryomov Date: Fri Mar 13 11:20:51 2020 +0100 rbd: avoid a deadlock on header_rwsem when flushing notifies commit 0e4e1de5b63fa423b13593337a27fd2d2b0bcf77 upstream. rbd_unregister_watch() flushes notifies and therefore cannot be called under header_rwsem because a header update notify takes header_rwsem to synchronize with "rbd map". If mapping an image fails after the watch is established and a header update notify sneaks in, we deadlock when erroring out from rbd_dev_image_probe(). Move watch registration and unregistration out of the critical section. The only reason they were put there was to make header_rwsem management slightly more obvious. Fixes: 811c66887746 ("rbd: fix rbd map vs notify races") Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman commit 9538fb7d2c01a6483b37f1d9a7daebcc905d3bbd Author: Zenghui Yu Date: Wed Apr 8 19:43:52 2020 +0800 irqchip/mbigen: Free msi_desc on device teardown commit edfc23f6f9fdbd7825d50ac1f380243cde19b679 upstream. Using irq_domain_free_irqs_common() on the irqdomain free path will leave the MSI descriptor unfreed when platform devices get removed. Properly free it by MSI domain free function. Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device") Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com Signed-off-by: Greg Kroah-Hartman commit 14db3551459b2c3655ae2c4e972055c68fff2086 Author: Pablo Neira Ayuso Date: Tue Apr 7 14:10:11 2020 +0200 netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object type commit d9583cdf2f38d0f526d9a8c8564dd2e35e649bc7 upstream. EINVAL should be used for malformed netlink messages. New userspace utility and old kernels might easily result in EINVAL when exercising new set features, which is misleading. Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit f520683b90bf75a2278bc9d820dc96305fa8bd76 Author: Slava Bacherikov Date: Thu Apr 2 23:41:39 2020 +0300 kbuild, btf: Fix dependencies for DEBUG_INFO_BTF commit 7d32e69310d67e6b04af04f26193f79dfc2f05c7 upstream. Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also enabled will produce invalid btf file, since gen_btf function in link-vmlinux.sh script doesn't handle *.dwo files. Enabling DEBUG_INFO_REDUCED will also produce invalid btf file, and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense. Fixes: e83b9f55448a ("kbuild: add ability to generate BTF type info for vmlinux") Reported-by: Jann Horn Reported-by: Liu Yiding Signed-off-by: Slava Bacherikov Signed-off-by: Daniel Borkmann Reviewed-by: Kees Cook Acked-by: KP Singh Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20200402204138.408021-1-slava@bacher09.org Signed-off-by: Greg Kroah-Hartman commit 44c7d0df1f1d8dd34fbbba6f22d75816492a4ab2 Author: Martin Fuzzey Date: Thu Apr 2 15:51:28 2020 +0200 ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN. commit 4141f1a40fc0789f6fd4330e171e1edf155426aa upstream. In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains") Signed-off-by: Martin Fuzzey Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit cdd19b1175fe987a5b21f49837a315c03ae9b188 Author: Andrii Nakryiko Date: Fri Apr 10 13:26:12 2020 -0700 bpf: Prevent re-mmap()'ing BPF map as writable for initially r/o mapping commit 1f6cb19be2e231fe092f40decb71f066eba090d7 upstream. VM_MAYWRITE flag during initial memory mapping determines if already mmap()'ed pages can be later remapped as writable ones through mprotect() call. To prevent user application to rewrite contents of memory-mapped as read-only and subsequently frozen BPF map, remove VM_MAYWRITE flag completely on initially read-only mapping. Alternatively, we could treat any memory-mapping on unfrozen map as writable and bump writecnt instead. But there is little legitimate reason to map BPF map as read-only and then re-mmap() it as writable through mprotect(), instead of just mmap()'ing it as read/write from the very beginning. Also, at the suggestion of Jann Horn, drop unnecessary refcounting in mmap operations. We can just rely on VMA holding reference to BPF map's file properly. Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Reported-by: Jann Horn Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Reviewed-by: Jann Horn Link: https://lore.kernel.org/bpf/20200410202613.3679837-1-andriin@fb.com Signed-off-by: Greg Kroah-Hartman commit a24ea17725d5ccac04eb2e24321bec78e15b1f0f Author: Luke Nelson Date: Wed Apr 8 18:12:29 2020 +0000 arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0 commit bb9562cf5c67813034c96afb50bd21130a504441 upstream. The current arm BPF JIT does not correctly compile RSH or ARSH when the immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64 by 0 imm" BPF selftests to hang the kernel by reaching an instruction the verifier determines to be unreachable. The root cause is in how immediate right shifts are encoded on arm. For LSR and ASR (logical and arithmetic right shift), a bit-pattern of 00000 in the immediate encodes a shift amount of 32. When the BPF immediate is 0, the generated code shifts by 32 instead of the expected behavior (a no-op). This patch fixes the bugs by adding an additional check if the BPF immediate is 0. After the change, the above mentioned BPF selftests pass. Fixes: 39c13c204bb11 ("arm: eBPF JIT compiler") Co-developed-by: Xi Wang Signed-off-by: Xi Wang Signed-off-by: Luke Nelson Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200408181229.10909-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman commit fc6365811e005a9c9b6c13ac98fc887db93432d5 Author: Andrey Ignatov Date: Mon Apr 6 22:09:45 2020 -0700 libbpf: Fix bpf_get_link_xdp_id flags handling commit f07cbad29741407ace2a9688548fa93d9cb38df3 upstream. Currently if one of XDP_FLAGS_{DRV,HW,SKB}_MODE flags is passed to bpf_get_link_xdp_id() and there is a single XDP program attached to ifindex, that program's id will be returned by bpf_get_link_xdp_id() in prog_id argument no matter what mode the program is attached in, i.e. flags argument is not taken into account. For example, if there is a single program attached with XDP_FLAGS_SKB_MODE but user calls bpf_get_link_xdp_id() with flags = XDP_FLAGS_DRV_MODE, that skb program will be returned. Fix it by returning info->prog_id only if user didn't specify flags. If flags is specified then return corresponding mode-specific-field from struct xdp_link_info. The initial error was introduced in commit 50db9f073188 ("libbpf: Add a support for getting xdp prog id on ifindex") and then refactored in 473f4e133a12 so 473f4e133a12 is used in the Fixes tag. Fixes: 473f4e133a12 ("libbpf: Add bpf_get_link_xdp_info() function to get more XDP information") Signed-off-by: Andrey Ignatov Signed-off-by: Daniel Borkmann Acked-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/bpf/0e9e30490b44b447bb2bebc69c7135e7fe7e4e40.1586236080.git.rdna@fb.com Signed-off-by: Greg Kroah-Hartman commit 66c70a096e7d36b08ae585fefa21c59b9d81c35c Author: Li RongQing Date: Thu Apr 2 15:52:10 2020 +0800 xsk: Fix out of boundary write in __xsk_rcv_memcpy commit db5c97f02373917efe2c218ebf8e3d8b19e343b6 upstream. first_len is the remainder of the first page we're copying. If this size is larger, then out of page boundary write will otherwise happen. Fixes: c05cd3645814 ("xsk: add support to allow unaligned chunk placement") Signed-off-by: Li RongQing Signed-off-by: Daniel Borkmann Acked-by: Jonathan Lemon Acked-by: Björn Töpel Link: https://lore.kernel.org/bpf/1585813930-19712-1-git-send-email-lirongqing@baidu.com Signed-off-by: Greg Kroah-Hartman commit f47ed954c43f5d39ac99bb23f51325ff1aa58068 Author: Michael Walle Date: Fri Mar 27 17:24:50 2020 +0100 watchdog: sp805: fix restart handler commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler") Signed-off-by: Michael Walle Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman commit 247b8ae4c92a2fe0c858d88b72fc801351ce632c Author: Roman Gushchin Date: Fri Feb 28 16:14:11 2020 -0800 ext4: use non-movable memory for superblock readahead commit d87f639258a6a5980183f11876c884931ad93da2 upstream. Since commit a8ac900b8163 ("ext4: use non-movable memory for the superblock") buffers for ext4 superblock were allocated using the sb_bread_unmovable() helper which allocated buffer heads out of non-movable memory blocks. It was necessarily to not block page migrations and do not cause cma allocation failures. However commit 85c8f176a611 ("ext4: preload block group descriptors") broke this by introducing pre-reading of the ext4 superblock. The problem is that __breadahead() is using __getblk() underneath, which allocates buffer heads out of movable memory. It resulted in page migration failures I've seen on a machine with an ext4 partition and a preallocated cma area. Fix this by introducing sb_breadahead_unmovable() and __breadahead_gfp() helpers which use non-movable memory for buffer head allocations and use them for the ext4 superblock readahead. Reviewed-by: Andreas Dilger Fixes: 85c8f176a611 ("ext4: preload block group descriptors") Signed-off-by: Roman Gushchin Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 9b211ae62fd175a4039f12c2581746a469b9b692 Author: Takashi Iwai Date: Mon Apr 13 10:20:30 2020 +0200 ALSA: hda: Honor PM disablement in PM freeze and thaw_noirq ops commit 10db5bccc390e8e4bd9fcd1fbd4f1b23f271a405 upstream. freeze_noirq and thaw_noirq need to check the PM availability like other PM ops. There are cases where the device got disabled due to the error, and the PM operation should be ignored for that. Fixes: 3e6db33aaf1d ("ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-3-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 349807540259d6bfbbadc4373c76ba627693afb3 Author: Li Bin Date: Mon Apr 13 19:29:21 2020 +0800 scsi: sg: add sg_remove_request in sg_common_write commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream. If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by: Douglas Gilbert Signed-off-by: Li Bin Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit b30fbf9a59831c009d561c0c4fe40813aec94ab4 Author: Josh Poimboeuf Date: Wed Apr 1 13:23:28 2020 -0500 objtool: Fix switch table detection in .text.unlikely commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Reviewed-by: Miroslav Benes Acked-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman commit 738627e6428570c4015f010480240b63c4f0d02c Author: Luke Nelson Date: Thu Apr 9 15:17:52 2020 -0700 arm, bpf: Fix offset overflow for BPF_MEM BPF_DW commit 4178417cc5359c329790a4a8f4a6604612338cca upstream. This patch fixes an incorrect check in how immediate memory offsets are computed for BPF_DW on arm. For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte access into two separate 4-byte accesses using off+0 and off+4. If off fits in imm12, the JIT emits a ldr/str instruction with the immediate and avoids the use of a temporary register. While the current check off <= 0xfff ensures that the first immediate off+0 doesn't overflow imm12, it's not sufficient for the second immediate off+4, which may cause the second access of BPF_DW to read/write the wrong address. This patch fixes the problem by changing the check to off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow. A side effect of simplifying the check is that it now allows using negative immediate offsets in ldr/str. This means that small negative offsets can also avoid the use of a temporary register. This patch introduces no new failures in test_verifier or test_bpf.c. Fixes: c5eae692571d6 ("ARM: net: bpf: improve 64-bit store implementation") Fixes: ec19e02b343db ("ARM: net: bpf: fix LDX instructions") Co-developed-by: Xi Wang Signed-off-by: Xi Wang Signed-off-by: Luke Nelson Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman commit 455ae686a0cf7e9ea60bc0135628402360c46114 Author: Stefano Brivio Date: Wed Apr 1 17:14:38 2020 +0200 netfilter: nft_set_rbtree: Drop spurious condition for overlap detection on insertion commit 72239f2795fab9a58633bd0399698ff7581534a3 upstream. Case a1. for overlap detection in __nft_rbtree_insert() is not a valid one: start-after-start is not needed to detect any type of interval overlap and it actually results in a false positive if, while descending the tree, this is the only step we hit after starting from the root. This introduced a regression, as reported by Pablo, in Python tests cases ip/ip.t and ip/numgen.t: ip/ip.t: ERROR: line 124: add rule ip test-ip4 input ip hdrlength vmap { 0-4 : drop, 5 : accept, 6 : continue } counter: This rule should not have failed. ip/numgen.t: ERROR: line 7: add rule ip test-ip4 pre dnat to numgen inc mod 10 map { 0-5 : 192.168.10.100, 6-9 : 192.168.20.200}: This rule should not have failed. Drop case a1. and renumber others, so that they are a bit clearer. In order for these diagrams to be readily understandable, a bigger rework is probably needed, such as an ASCII art of the actual rbtree (instead of a flattened version). Shell script test sets/0044interval_overlap_0 should cover all possible cases for false negatives, so I consider that test case still sufficient after this change. v2: Fix comments for cases a3. and b3. Reported-by: Pablo Neira Ayuso Fixes: 7c84d41416d8 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Signed-off-by: Stefano Brivio Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman